|
| 1 | NSItem-AirWalker:-Providing,designingandfixingArm Wheel in a pair size100x550x1480mmfabricatedwithmainpostof140mm dia and3.00mmthickandotherpipesof40mmdia3.00mmthickall pipesmadeupofhotrolledtubularsteelandhotdippedgalvanized, andpowdercoatedusingAkzoNobelorequivalentof80-120 micron thick.Allweldingjointsofpipeareroboticweldedwithjoints scalloped asnecessary and dressed off removing sharp edges and burrs |
| 2 | NSItem-SitUpStation:Providing,designingandfixingof double sit-up stationofsize 1500x1150x650mmfabricated withmainpostof 140mm dia and3.00mmthick andotherpipe sof60mmdia3.2mmthick all pipesmadeupofhotrolledtubularsteelandhotdippedgalvanized, and powdercoatedusingAkzoNobelore quivalentof100-130 micron thick.Allweldingjointsofpipeshallberoboticwelded with joints scallopedasnecessaryanddressedoffremoving sharp edges and burrs.Zincprimerpainttobeappliedatall welding points prior to finishing.Seatand Baseplatecovershallbemadeupof virgin LLDPEplasticbyrotationalmouldingwithminimumthicknessof plastic 4.00mm,colourful and U V resistant environmental friendly. The equipmentshouldbefixedon groundwithconcreteof minimum strengthM25and Jshapedwelded boltsandwhenconcrete is set, fixtheequipmentontoitandcovernutsandboltswiththebase plate cover, all complete as per direction and approval of Engine |
| 3 | NSItem-Providing,designingandfixingofairswingingpairof size 1150 x900x1250mmfabricatedwithmainpostof140mmdiaand3.00 mm thickandotherpipesof40mmdia3.00mmthickallpipesmadeup of hotrolledtubularsteelandhotdippedgalvanized,andpowder coatedusingAkzoNobelorequivalentof80-120micronthick.All weldingjointsofpipeareroboticweldedwithjointsscallopedas necessaryanddressedoffremovingsharpedgesandburrs.Zincprimer paint tobeappliedatallweldingpointspriortofinishing.Seatand Base platecovershallbemadeupofvirginLLDPEmanufacturedby rotationalmouldingwithminimumthicknessofplastic4.00mm,colourful and UVresistantenvironmentalfriendly.Bearingusedshallbe maintainedfree,dulyoiledsealedandselflubricatedmadebyreputed companytobeapprovedbyEngineer-in-Charge.Equipmenttobefitted withinbuiltlimiterstopreventunwantedmovements.Allopenendsof pipe tobe coloured by GI/LLDPE caps for user safety |
| 4 | NSItem-HorseRiderStation:Providing,designingandfixing of horse riderstationofsize1000x600x1100mmfabricatedwithmain post of140mmdiaand3.00mmthickandotherpipesof60mmdia3.3mmthickallpipesmadeupofhotrolledtubularsteelandhot dippedgalvanized,andpowdercoatedusingAkzoNobelor equivalent of 100-130micronthick.Allweldingjointsofpipeareroboticwelded withjointsscallopedasnecessaryanddressedoffremovingsharp edgesandburrs.Zincprimerpainttobeappliedatallweldingpoints prior tofinishing.PadalsshallbemadeupNylonalloywithrounded edge ofpreventanyimpactofinjuryandseattobemadefromvirgin LLDPEmanufacturedbyrotationalmouldingwithminimumthickness ofplastic4.00mm,colourfulandUVresistantenvironmental friendly.Bearingusedshallbemaintenancefree,dulyoiledsealed and selflubricated made by reputed company to be approved by Engineer-inCharge.Equipmenttobefittedwithinbuiltlimiters to preve |
| 5 | NSItem-StairStepper:Providing,designingandfixingofstair stepper in acombinationofpairandasinglestepofsize1000x800x 1400 mmfabricatedwithmainpostof140mmdiaand3.00mmthick and otherpipesof50mmdia3.3mmthickallpipesmadeupofhotrolled tubularsteelandhotdippedgalvanized,andpowdercoatedusing AkzoNobelorequivalentof100-130micronthick.Allweldingjoints of pipeareroboticweldedwithjointsscallopedasnecessaryand dressed offremovingsharpedgesandburrs.Zincprimerpainttobe applied at allweldingpointspriortofinishing.Padalsshallbemadeupof Nylonalloywithroundededgeofpreventanyimpactofinjuryand seat to bemadefromvirginLLDPEmanufacturedbyrotationalmouldingwithminimumthicknessofplastic4.00mm,colourfulandUV resistantenvironmentalfriendly.Bearingusedshallbemaintenance free, dulyoiledsealedandselflubricatedmadebyreputedcompanyto beapproved by Engineer-in-Charge. Equipment to be fitt |
| 6 | NSItem-LegPress:Providing,designingandfixingofstair stepper in acombinationofpairandasinglestepofsize2000X550X 1600 mmfabricatedwithmainpostof140mmdiaand3.00mmthick and otherpipesof60mmdia3.3mmthickallpipesmadeupofhot rolledtubularsteelandhotdippedgalvanized,andpowdercoated usingAkzoNobelorequivalentof100-130micronthick.Allwelding joints ofpipeareroboticweldedwithjointsscallopedasnecessaryand dressed off removing sharp edges and burrs. Zinc primerpaint to beappliedatallweldingpointspriortofinishing.Handlebarsare to beprovidedwithhighqualitygriprubberattopend.Padalsshall bemadeupofNylonalloywithroundededgeofpreventany impact ofinjuryandseattobemadefromvirginLLDPEmanufactured byrotationalmouldingwithminimumthicknessofplastic4.00mm, colourful and U V resistant environmental friendly. Bearing used shallbemaintenancefree,dulyoiledsealedandselflubricated made byrepu |
| 7 | NSItem-ExercisingBar:Providing,designingandfixingof Exercising Bar ofsize1800X550X1700mmfabricatedwithmainpostof 140mm diaand3.00mmthickandotherpipesof42mmdia3.3mmthick all pipesmadeupofhotrolledtubularsteelandhotdippedgalvanized, andpowdercoatedusingAkzoNobelorequivalentof100-130 micronthick.Allweldingjointsofpipeareroboticweldedwithjoints scallopedasnecessaryanddressedoffremovingsharpedgesand burrs. Zincprimerpainttobeappliedatallweldingpointspriorto finishing.Handlebarsaretobeprovidedwithhighqualitygriprubberat topend.PadalsshallbemadeupofNylonalloywithrounded edge ofpreventanyimpactofinjuryandseattobemadefromvirgin LLDPEmanufacturedbyrotationalmouldingwithminimumthickness ofplastic4.00mm,colourfulandUVresistantenvironmental friendly.Bearingusedshallbemaintenancefree,dulyoiledsealed and selflubricatedmadebyreputedcompanytobeapprovedby Engineer |
| 8 | NSItem-ArmWheel:-Providing,designingandfixingArm Wheel in a pair ofsize850X800X1800mmfabricatedwithmainpostof 140mm diaand3.00mmthickandotherpipesof60mmdia3.3mmthick allpipesmadeupofhotrolledtubularsteelandhotdipped galvanized,andpowdercoatedusingAkzoNobelorequivalentof100-130 micronthick.Allweldingjointsofpipeareroboticweldedwithjoints scallopedasnecessaryanddressedoffremovingsharpedgesand burrs. Zincprimerpainttobeappliedatallweldingpointspriorto finishing.Handle bars are to be provided with high quality grip rubber.PadalsshallbemadeupofNylonalloywithroundededgeofprevent anyimpactofinjuryandseattobemadefromvirginLLDPE manufacturedbyrotationalmouldingwithminimumthicknessofplastic 4.00mm,colourfulandUVresistantenvironmentalfriendly.Bearing used shallbemaintenancefree,dulyoiledsealedandselflubricated made byreputed company to be approved by Engineer-in- Charg |
| 9 | NS Item -Elliptical Exerciser/ Sky walker Providing, designing and fixing Elliptical Exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60mm dia 3.3 mm thick a// pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel orequivalent of 100- 130 micron thick. All welding joints of pipe are robotic welded with jointsscallopedasnecessaryanddressedoffremovingsharp edges and burrs. Zinc primer paint to be applied at allwelding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made upofNylonalloywithroundededgeofpreventanyimpactof injury and seat fo be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistantenvironmentalfriendly.Bearingusedsha//bemaintenance free, dulyoiled sealed and self lubricated made by reputedcompanytobeapproved |
| 10 | NS Item -NSItem -Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60 mm dia 3.3 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, andpowdercoatedusingAkzoNobelorequivalentof100-130 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing.Padalsshall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured byrotationalmouldingwithminimumthicknessofplastic4.00mm, colourful and U V resistant environmental friendly.Bearingusedshallbemaintenancefree,dulyoiledsealedand self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipment to be fitted within builtlimiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction andapprovalofEngineer-in-Chargeregardingmaterial,shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 11 | NSItem-NSItem-Twister:-Providing,designingandfixing Twister ofsize 1700 X 1300 X 1300 mm fabricated with main post of 140mmdiaand3.00mmthickandotherpipesof60mmdia3.3 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100-130 micron thick. All welding joints ofpipe are robotic welded with joints scalloped as necessaryand dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edgeof prevent any impact of injury and seat to be made fromvirgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipmenttobefittedwithinbuiltlimiterstopreventunwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all completeasperdirectionandapprovalofEngineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc |
| 12 | NSItem-NSItem-RowingMachine:-Providing,designing and fixingRowing Machine of size 1280 X 800 X 1500 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 60mm dia 3.3 mm thick all pipes made up of hotrolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 100- 130 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharpedges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured byrotational moulding with minimum thickness of plastic4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealedand self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction andapprovalofEngineer-in-Chargeregardingmaterial,shape of equipment, colour on metal, seat and base cover plate and fixing of equipment |
| 13 | NS Item -Pull Chair: Providing, designing and fixing of Pullpair of size 2500 X 800 X 2000 mm fabricated with main post of140mm dia and 3.00mm thick and other pipes of 60mm dia3.3mmthickallpipesmadeupofhotrolledtubularsteeland hot dipped galvanized, and powder coatedusingAkzo Nobel or equivalent of 100-130 micron thick. All weldingiintsofpipeareroboticweldedwithjointsscalloped as necessaryanddressedoffremovingsharpedgesandburrs.Zincprimer paint tobeappliedatallweldingpointspriortofinishing.Handlebars are to be provided with high quality grip rubber at top end.PadalsshallbemadeupofNylonalloywithroundededgeof prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shallbe maintenance free, duly oiled sea/ed and self lubricated madebyreputedcompanytobeapprovedbyEngineer-in- Cha |
| 14 | NSItem-SeatedChestPress:-Providing,designingand fixing Seated ChestPressofPullpairofsize1800X700X2000mmfabricated with mainpostof140mmdiaand3.00mmthickandotherpipesof 60mm dia 3.3mmthickallpipesmadeupofho trolledtubularsteeland hotdippedgalvanized,andpowde rcoatedusingAkzoNobelor equivalentof100-130micronthick.Allweldingjointsofpipe areroboticweldedwithjointsscallopedasnecessaryanddressed off removingsharpedgesandburrs.ZincPrimerpainttobe applied at all weldingpointspriortofinishing. Handlebarsaretobe provided withhighqualitygriprubber.PadalsshallbemadeupofNylon alloy with roundededgeofpreventanyimpactofinjuryandseattobe made fromvirginLLDPEmanufacturedbyrotational mouldingwith minimum thickness of plastic 4.00mm, colourful and U V resistant environmentalfriendly.Bearingusedshallbe maintenance free, duly oiledsealedandselflubricatedmadeby reputedcompanyto be approved b |
| 15 | HSR Item 10.100.1-Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate:90mmto40mmsizeinfoundationandplinth. HSR Rate(Rs.) 1727.00Through Rate |
| 16 | HSR Item 4.14.1-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenchesordrains(notexceeding1.5minwidthor10sqmon plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposalofsurplusexcavatedsoilasdirected,withinaleadof 50 m. 1. All kinds of soil.HSR Rate(Rs.) 83.00Through Rate |
| 17 | HSR Item 7.21.2-Brick work with common burnt clay non- modularbricksofclassdesignation10.5infoundationand plinthin:2.Cementmortar1:6(1cement:6coarsesand) HSR Rate(Rs.) 3968.00Through Rate |
| 18 | HSRItem17.5.3-CompactingOriginalGround3.Compaction of EarthworkCompaction of & preparation of sub grade including loosening, levelling of earth 225 mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieveminimumdrydensityasgivenintheTable3000-2as per technical clause 305 of MORT&H specificationsHSR Rate(Rs.) 7.00Through Rate |
| 19 | HSR Item 17.23.2-Water Bound Macadam Grading - II 2. Water Bound Macadam (53mm to 22.4 mm)Grading II with screenings Type “B” (11.2mm aggregates) Providing, laying, spreadingandcompactingstoneaggregatesofspecificsizes towaterboundmacadamspecificationincludingspreadingin uniformthickness,handpacking,rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ bindingMaterialstofilluptheintersticesofcoarseaggregate, watering and compacting to the required density complete as per technical clause 404 of MORT&H specificationsHSR Rate(Rs.) 1243.00Through Rate |
| 20 | HSR Item 17.69.3-Interlocking Concrete Block Pavement 3. Providing and Laying 60 mm thick ISI marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 ofallshapesandcoloursindesignmixcementM35overthe bed of 25 mm thick fine sand complete in all respect.HSR Rate(Rs.) 576.00Through Rate |
| 21 | HSR Item 6.1.2-Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering-AllworkbelowplinthlevelanduptoFloorIV level:2.1:2:4(1cement:2coarsesand(zone-III):4graded stone aggregate 20 mm nominal size)HSR Rate(Rs.) 3476.00Through Rate Please Enable Macros to View BoQ information |
