|
| 1 | Boring of 30cm dia piles of single under reamed of 50cm dia of bulb and 3.5 meter depth in black cotton soil with hand operated auger machine including all laboure T&P etc. for proper completion of work as per IS code-2911(Part-III) 1980. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:(All kinds of soil)As per DSR-2.1.1 |
| 3 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.As per DSR-2.27 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).As per DSR-4.1.8 |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) :.As per DSR-5.2.2 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.As per DSR-5.22.1 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns.As per DSR-4.3.1 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse).As per DSR-6.1.1 |
| 9 | CEMENT PLASTER (IN FINE SAND)12 mm cement plaster of mix :in 1:4 (1 cement: 4 fine sand).AS per DSR No.- 13.1.1 |
| 10 | Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work |
| 11 | Supply & fixing of 4 cm. (1/½\\") thick commercial quality Sitapur Ply or other approved ply wood flush door shutters including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges, bolts, locks, handles, springs, and /or other fitting but excluding their supply and including painting with two coats of Black japan on all iron fitting if necessary & including fixing the glass panes putty & brad. Glass to be 0.64 Kg. ( 21 oz) fitting with necessary.S.I.No-470 |
| 12 | Painting or varnishing new iron work in small areas of new wood of 1 sqm area with one coat of ready mixed priming paint and two coat or approved superior quality ready mixed paint or varnish including supply of all material, labour and T&P etc. required |
| 13 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 14 | Painting one priming cote and two cote oil distemper on new work including supply of all mateirals, labour and T&P etc. required for proper completion work. |
| 15 | S/F Rain Water pipe 110 mm dia PVC complete with 2 or more coat |
| 16 | Finishing walls with water proof cement paint of approved make and quality on new work with Three coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work.S.I. No ' 660 |
| 17 | P/fixing of penes of glass witth and i/c atul or equivalent ISI mark quality putty and brads and spring i/c supply of all materials labour t&p etc.5.5 mm Thick |
| 18 | Supply & fixing galvanzad mosquitos proof heavy quality iron wire gauge or expended mrtal have quality over windows & including supply of C.P. Teak wood battens 8cm. x 1cm. (3\\"x3/8\\") and including supply and fixing of necessary screws, all materials, labour and tools and plants etc. required for proper completion of the work. S.I. No. 455 |
| 19 | Apprpoximate cost of and oxidized iron fittings with screws for doors and windows etc.S.I.No-472 |
| 20 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4\\") graded approved stone laid in panels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3\\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.(On roof)S.I.No-602 |
| 21 | Excavation in foundation in ordinary soil ( Loam clay or sand) including lift up to 1.5 meter (5ft) and lead upto 30m (100ft) and including filling,watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as direction by the Engineer-in-charge upto a distance of 30m(100ft) from the foundation trenches. |
| 22 | Coarse sand filling in plinth including supply of necessary quantity of coarse sand/moorum from the side of work & including watering ,dressing etc. Rate to include cost of all materials,labour and tools & plants,etc. required for proper completion of the work. (as per S.I. No. 255) |
| 23 | Cement concrete with 4cm (1/2'') gauge approved stone ballast, approved coarse sand. cement in the proportion 8:4:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. (as per S.I. No. 273) |
| 24 | Cement concrete with 2cm (3/4'') gauge approved stone ballast, approved coarse sand. cement in the proportion 4:2:1 including supply of all materials,labour and tools and plants etc. required for proper completion of the work. |
| 25 | As in item (283) above but in RCC columns in 1.1.5.3 |
| 26 | As in item (283) above but in the lighter beams i.e having spans upto 6 meters (20). |
| 27 | RCC work with cement approved coarse sand and 2cm. (3/4'') gauge approved stone ballast in the proportion 1:2:4 in lintels of doors and windows, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.I wire.and including necessary cantering and suttering etc and also including supply of all materials,labour and tools and plants etc. required for proper completion of the work. binding wire to be supplied by the contractor free of cost. |
| 28 | Mild steel of iron in plain work such as reinforced concrete/ brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks and authorised over lapping shall be measured. (S.I. No. 504) |
| 29 | Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. |
| 30 | 12mm thick plaster on brick work minimum thickness not less than 10mm with 1part of cement and 2 part of find sand of 1.25 fineness modulus. |
| 31 | White washing three coat including supply of all materials, labour and tools and plants etc. required for completion of the work. |
| 32 | Providng and laying of 8 to 10mm thick ivory or light shade vitrified tiles of 600mm x 600mm size in flooring or skirting laid with 1 : 3 cement mortar (1 cement , 3 coarse sand) finishing with cement sturry & with pigment grouting & Polishing complete I/C S/O all material labour T & P etc. required for proper completion of work excluding base contrete. |
| 33 | Supply of MS angle iron door, window or ventilator frame made of approved MS angle iron wrought to required form including drilling holes, welding and reciting where necessary and also including supply of all material, such as steel hinges of required size nut bolts etc. and also including all taxes, wastage and one coat of red oxide paint as per direction of Engineer-in-charge for proper completion of work at site of work. (as per cht-10 Add new Item No. 2) |
| 34 | Supply and fixing low density polythene tank sintex or equivalent. |
| 35 | Solar water system with storage facilitySolar submersible automated pump DC(1H.P) solar PV modules (900 watt) Required fabrication structure, miscellaneous, (transportation, civil work, installation, plates pipes etc. |
| 36 | New boring (40-60 maters as per strata) |
| 37 | Supply and fixing of water cooling machine 120 liter capacity bluestar-Voltas make with electrical system installation, fabrication,transportation and other miscellaneous work asmasonary type structure with drainage system with covering of iron frame and etc complete in all respect. |
| 38 | |Resistivity survey and water sample testing of boring |
| 39 | Providing and fixing solar system operate outomatimatic lights with pole in park High Mast Light |
| 40 | COMPLETE ELECTRIFICATION WORK |
| 41 | Add 18 % GST Please Enable Macros to View BoQ information |
