|
| 1 | A) Drg No. FD-246 BED HARD PLY TOP |
| 2 | Remove the unserviceable plywood from both side of head board frame of bed.Supply and fixing with new plywood 4mm thick one side teak face on the both side existing head board (Size of ply : 780mm x 340mm) and 12mm dia half cut teak wood beading shall be provided with joints of plywood. |
| 3 | All as per item No. 1 here-in-before but for foot board. Size of Ply shall be 780mm x180mm. |
| 4 | Remove of unserviceable legs from head board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 860mm and all as per drg and directed by Engineer-in-charge. |
| 5 | Remove of unserviceable legs from foot board of bed and Supply and fixing with new legs in its original position made out of teak wood. Size of leg shall be 60mmx 60mm x 500mm and all as per drg and directed by Engineer-in-charge. |
| 6 | Remove the existing unserviceable long rail and supply and fix new long rail (size : 35mm x 90mm x 1980mm) made out of Teak wood well seasoned and all as shown on drg and directed by Engineer-in-charge. |
| 7 | Remove the existing unserviceable ply wood from bed and supply and fixing with new plywood 12mm thick BWR IS-303 |
| 8 | Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge. |
| 9 | B) Drg No. FD-280 CHAIR WRITING |
| 10 | Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in in its original position as per drg.Front Legs. |
| 11 | Rear Legs. |
| 12 | Front rail of seat frame (Hole should be 12.5mm apart of each other). |
| 13 | Side Rail(Ditto complete). |
| 14 | Long Stiffener. |
| 15 | Back rest batten. |
| 16 | Arm rest. |
| 17 | Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as approved and providing new hard rubber/PVC shoes at the bottom of the chair. |
| 18 | All as per item No 1.07 here-in-before but for chair writing. |
| 19 | C) Drg No. FD-279/228/16 CHAIR DINING |
| 20 | Remove the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as approved and providing new hard rubber/PVC shoes at the bottom of the chair. |
| 21 | Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.Front Legs. |
| 22 | Rear Legs |
| 23 | Front rail of seat frame (Hole should be 12.5mm apart of each other) |
| 24 | Side Rail(Ditto complete) |
| 25 | Back Rail(Ditto complete) |
| 26 | Short stiffener |
| 27 | Back rest batten |
| 28 | All as per item No 1.07 here-in-before but for chair dining |
| 29 | D) Drg No. FD- 30(M) / FD-1115 TABLE DINING 4 PERSONS |
| 30 | Taking out old u/s top of table dining 4 pers & supply & fixing new top made out of prelaminated particle board bonded with phenol formaldehyde exterior gde 18/19mm thick one side teak veneered & other side having balancing white laminated duly fixing with 19x4mm thick teakwood beading all around the top complete all as specified and as directed. |
| 31 | Removing old & u/s legs of table dinning 4 pers & S/F new legs of size 740x60x60mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws complete all as directed & shown on drg. |
| 32 | Taking out old & u/s long rail and S&F new long rail made out of 1st class well seasoned teakwood complete all as directed and shown on drg. |
| 33 | All as per item No. 4.03 here-in-before but short rail of table dining 4 Pers |
| 34 | All as per item No.1.07 here-in-before but for Table dining 4 Pers. |
| 35 | E) Drg No. FD-274/DB-3973 TABLE CENTRE |
| 36 | Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 60x30x356mm high and fixing the same in its original position as per drg. |
| 37 | Remove old broken top long rail and providing the new top long rail made out of 1st class hardwood teak of size 20x50x900mm and fixing the same in its original position as per drg. |
| 38 | Remove old unserviceable top short rail and providing the new top short rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak and fixing the same in its original position as per drg. |
| 39 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on table centre in its original position as per drawing |
| 40 | All as per item No. 1.07 here in before but for Table centre |
| 41 | F ) Drg No. FD-277/FD-25 PEG TABLE |
| 42 | Remove the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg. |
| 43 | Remove old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm and fixing the same in its original position as per drg. |
| 44 | Remove the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm. |
| 45 | All as per item No. 1.07 here in before but for Peg Table |
| 46 | G) Drg No. FD-229/17(M) CHAIR EASY |
| 47 | Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.Front Legs |
| 48 | Front rail of seat frame (Hole should be 12.5mm apart of each other) |
| 49 | Side Rail(Ditto complete) |
| 50 | Back Rail(Ditto complete) |
| 51 | Arm Rest |
| 52 | Remove the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approval by Engr-in-charge and providing new hard rubber shoes on legs below of chair Easy. |
| 53 | All as per item No. 1.07 here-in-before but for Chair easy. |
| 54 | H) Drg No.FD-251/DB-3980 TABLE DRESSING LADIES WITH MIRROR |
| 55 | Remove unserviceable legs and providing the legs of existing shape & size made out of well seasoned teak wood and fixing the same in its original position as per drg. |
| 56 | Remove unserviceable stiffener and providing the new one of existing shape & size made out of 1st class well seasoned teak wood and fixing the same in its original position as per drg. |
| 57 | Remove unserviceable top and providing/fixing the new one made out of 18mm thick pre-laminated particle board of existing shape & size with 4mm thick teak wood beading on front side and fixing the same in its original position. |
| 58 | Remove unserviceable side and providing the new one made out of 18mm thick pre-laminated particle board one side teak face and fixing the same in its original position. |
| 59 | Remove side of drawer and providing the new one of existing shape & size made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position. |
| 60 | All as per item No 51 here-in-before but back of drawer of existing shape & size as per drg. |
| 61 | Remove the unserviceable ply wood from the drawer and providing/fixing the same with new one 6mm ply wood of existing shape & size. |
| 62 | Remove the knob and providing the new one chromium plated 40mm as approved/directed by Engineer-in-charge and fixing the same in its original position. |
| 63 | Remove broken sliding glass and providing new one of existing shape & size as approved by Engr-in-charge and fixing the same in its original position. |
| 64 | Remove the unserviceable aluminum double channel and fixing the same as per drg. |
| 65 | Remove unserviceable mirror frame from its original position and providing the new frame made out of teak wood well seasoned of existing shape & size and fixing the same in its original position as per drg. |
| 66 | Remove the unserviceable broken mirror and providing the new one of size 1220x365x5.5mm thick as approved by Engineer-in-Charge and fixing the same in its original position. |
| 67 | Remove the ply wood from the back of the mirror and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg. |
| 68 | All as per item No. 1.07 here-in-before but for table dressing ladies with mirror. |
| 69 | I) Drg No. FD-291, FD-283 & 284 TABLE 900X600X760MM WITHOUT DRAWER/WITH DRAWER |
| 70 | Taking out old u/s top of table 900x600x760mm without drawer/with drawer and supply and fixing new top made out of prelaminated particle board bonded with phenol formaldehyde exterior gde 18/19mm thick one side teak veneered and other side having balancing white laminated duly fixing with 19x4mm thick teak wood beading all around the top complete all as specified and as shown on drg. |
| 71 | Removing old u/s following components of table 900x600x760mm with or without drawer & S/F with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg :- Legs |
| 72 | Long rails as directed and shown on drg. |
| 73 | Short rails as directed and shown on drg. |
| 74 | Side rails as directed and shown on drg. |
| 75 | S & F new drawer as directed and shown on drg. |
| 76 | All as per item No. 1.07 here-in-before but for Table 900x600x760mm without drawer/with drawer. |
| 77 | J) Drg No.FD-241 (M)/FD-372 SIDE BOARD |
| 78 | Remove existing unserviceable legs of side board and Supply and fixing new legs made out of 1st class teak wood well seasoned all as shown on drg. |
| 79 | Remove the unserviceable knobs of side board drawer and supply & fix new knobs as per existing size and all as shown on drg. |
| 80 | Remove the unserviceable back ply from side board and supply & fix new plywood 6mm thick BWR as per existing size all as shown on drg. |
| 81 | Remove the unserviceable shutters from side board and supply & fix new shutters made out of 18mm thick particle board exterior grade one side teak face and loumerical white all as shown on drgs. |
| 82 | Remove of the old unsv existing drawers and supply and fixed new drawers made of 1st class hard seasoned teak wood free from knots duly french polished. |
| 83 | All as per item No. 1.07 here-in-before but for side board. |
| 84 | Removing of old unsv existing top of side board and S&F new top made out of prelaminated particle board one side teak face and other side loumerical white exterior grade with french polished teak wood edging all around.Rest all as directed and as shown on drgs. |
| 85 | K) Drg No.DB-4120 TABLE OFFICE CLERK WOODEN |
| 86 | Removing of old and u/s top of table office clerk and s&f new top made out of 18/19mm thick prelaminated particle board teak veneered finish and providing with beading of teak wood size 19x4mm all around the top fixed with 20mm panel pin complete all as directed and as shown on drg. |
| 87 | Remove of the old unsv drawers of table office clerk and s&f new drawers made out of prelaminated particle board of thickness 18/19mm and 6mm plywood commercial BWR gde complete all as directed and as shown on drg. |
| 88 | Removing old & u/s knob from drawers of table office clerk wooden & S/F new CP/brass knob 40 mm dia of approved quality complete as directed. |
| 89 | Remove of the old unsv long stiffners of table office clerk and s&f new stiffners made out of 1st class teak wood well seasoned complete as directed and as shown on drg. |
| 90 | Remove of the old unsv short stiffners of table office clerk and s&f new stiffners made out of 1st class teak wood free from knot duly french polished . |
| 91 | Remove of the old unserviceable existing long rail and s&f new rails made out of first class hard seasoned teak wood free from knot duly french polished. |
| 92 | Remove of the old unserviceable existing short rail and S&f new rails made out of first class hard seasoned teak wood free from knots duly french polished. |
| 93 | Remove of the unsv existing legs and supply and fix new legs of existing shape and size made of first class hard seasoned teak wood free from knot duly french polished. |
| 94 | All as per item No. 1.07 here-in-before but for table office clerk wooden Please Enable Macros to View BoQ information |
