|
| 1 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n exc 1.50 Sqm each complete all as specified and as directed. |
| 2 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed. |
| 3 | Taking Down Shutter but exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed. |
| 4 | S&F Anodised aluminium frame for partition /doors /windows, ventilators with one or more rebates including joining cleat for fixing etc. including all fastening arrangements complete all as specified. |
| 5 | S & F Anodised aluminium door shutters, window & ventilator aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, tower bolt 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 6 | S & F for 6 mm thick ACP sheet for aluminium partitions/ doors/window shutters fixed with screws to timber frame work aluminium snap beading as per site requirement as in repair complete all as specified and directed. |
| 7 | S&F 4.0 mm thick sheet glass for aluminium partitons/ door/windows ordinary quality and glazing with oil putty in square. exc. 0.5sq.m in each pane including hacking out from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified. |
| 8 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 9 | S & F Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides as per SSR Part – I complete all as specified and directed. |
| 10 | S&F for 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. |
| 11 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and directed. |
| 12 | S&F Factory made coloured solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S frame welded/ sealed to the 5mm thick x15mm wide decorative PVC beading of 10mm x 10mm (90 degree) , & joined together with solvent cement, in the frame at site all as specified and directed by Engineer-in-Charge. |
| 13 | S&F 3 mm Sheet glass in repair, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifed and as directed |
| 14 | M&L Galvanised mild steel wire cloth in repair, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, all as specified and directed by engineer-in-charge. |
| 15 | Taking down aluminium doors shutter for servicing by tightening loose fittings, joints & aluminium sections by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional including replacement of ruber neoprene packing as directed and refixing in same position complete all as directed. (Note : Defective aluminium sections, glazing etc will be measured and paid separately if replaced) |
| 16 | Taking down aluminium window shutters, openable/sliding shutter, for servicing by tightening loose fittings, joints & aluminium sections by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional including replacement of ruber neoprene packing as directed and refixing in same position complete all as directed. (Note : Defective aluminium sections, glazing, roller, locks etc will be measured and paid separately if replaced) |
| 17 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 18 | M&L for Pre-cast cement concrete block 1:3:6 type C1 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 19 | M&L Rendering 15mm thick on brickwork or stone masonary surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and directed. |
| 20 | M&L Rendering 10mm thick on brickwork or concrete surfaces or surface other than fair face of brickwork in CM (1:4) finished even & smooth (without using extra cement) complete all as specified and directed. |
| 21 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint, white or tinted over & including a coat of cement primer complete all as specified and directed by engr-in-charge. |
| 22 | M&L for Mild steel curtain rod, powder coated, ornamental type of dia 25 mm including matching side & wall to wall brackets and funnels including taking out the existing complete all as specified and directed. |
| 23 | S & F Stainless Steel(SS) butt hinges, medium weight cold rolled 75mm size all as specified and directed by Engineer - in - Charge . |
| 24 | S & F Extruded aluminium alloy handles, fabricated type, 150mm size all as specified and directed by Engr - in - Charge . |
| 25 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed length of bolt 150mm long, all as specified and directed by Engineer - in – Charge |
| 26 | S & F aluminium alloy, anodised sliding door bolt, with hasp,staple(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ,length of bolt 250mm all as specified and directed by Engineer - in - Charge . |
| 27 | M&L for fixing in repairs door closer Aluminium Body hydraucally regulated universal type-2 suitable for door shutters of weight between 61 to 80 Kg complete including fixing to steel shutter by welding or rivets all as specified and directed.and tested complete all as specified. |
| 28 | S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 29 | M&L preparing new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete. |
| 30 | S & F 20 mm outer dia 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches or fixed on wall, ceiling or roof, fixed as in repair complete all as specified and directed. |
| 31 | Same as item no. mentioned above but S&F 25 mm outer dia pipe in repair and as specified and directed by Engineer in charge. |
| 32 | Supply and fix in repair 5000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 21 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 33 | M& L for cleaning and removing all scale and dirt etc from water tanks ( capacity exc 500 lit n exc 1000 lit capacity) and from mouths of circulating pipes as completed and directed by engineer in charge. |
| 34 | Item -ditto -same as above but capacity of tank exc 1000 and n exc 2000 lit as specified and directed by Engineer in charge.. |
| 35 | S&F in repair 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed by Engr-in-Charge |
| 36 | S&F in repair 20 mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed by Engr-in-Charge |
| 37 | S & F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge |
| 38 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge |
| 39 | S & F as in repair for small GI fittings, medium grade such as GI socket, elbow, nipple, tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed. |
| 40 | S & F as in repair for small GI fittings, medium grade such as GI socket, elbow, nipple, tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed. |
| 41 | Repair /maintenance of emergency breakdown of existing internal water supply and fixing water supply pipes of size 15/20 mm of any description under 5-8 feet snow during winter season and making internal water supply system through by using blow lamp and by replacing defective pipes/Small GI fittings (elbow/Tee/socket/nipple etc)/Gate valve/ stop valve etc including T&P at Palchan Transit camp station all as directed by Engineer-in-charge. The location where work is to be carried out will be informed and given as per complaints received during winter season for :- (a) 217 transit camp Palchan, complete area. (b) Old Transit Camp Palchan.NOTES: (i) The Contractor will employe a Supervisor. The Supervisor so employed shall report to the concerned JE for attending complaints and to give feed back and also to receive particular internal water supply Complaints and necessary instructions for smooth running of the internal water supply system. (ii) He will arrange sufficeint labour and T&P to remove 5-8 feet snow and clearing site for plumber to address the complaint with in 12 hrs after complaint received. Plumber deployed by the contractor will replace the pipes/Small GI fittings (elbow/Tee/ socket/ nipple etc)/Gate valve/ stop valve etc. make water supply through by melding frozen pipes using blow lamp or any other means as directed by Engineer-in-charge. (iii) For any default/delay in attending the complaints recovery shall be effected as per contract conditions provided here-in-after. (iv) T & P and blow lamp as requiered for the work shall be arranged by the contractor without any extra cost to the deptt. (v) Supervisor engaged by the contractor shall take all necessary preventative safety measures and adequate precautions to avoid any health hazard to work in extreme cold weather conditions and department shall not be held responsible for any unwanted incidence. (Material used in complaint will be measured and paid separately under respective items) |
| 42 | Supply and fix in repair 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fix in repair 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 21 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fix in repair 2000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 21 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F 15mm bore Anglecock/ stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms as in repairs complete all as specified and directed. |
| 46 | S&F 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) as in repairs complete all as specified and directed. |
| 47 | S&F in repairs for vitreous china wash basin white flat back size 550 x 400mm including bracket waste coupling and waste pipe complete all as specified and as directed. |
| 48 | S & F in repairs Wash down water closet (Pedestal pattern), complete including PVC seat cover and CP jet complete all as specified and as directed. |
| 49 | Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and as directed. |
| 50 | S & F bevelled edge mirror of 600x450mm selected quality glass mounted over 6mm thick AC bldg board or comercial plywood fixed to wooden plug with CP brass screw and cup washer fixed in repair complete all as specified and as directed. |
| 51 | Supply and fixing central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed. |
| 52 | Supply and fixing wall Mixer, mixer for mixing hot & cold water screwed down for iron pipe and fixed, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and as directed. |
| 53 | Supply and fixing chromium plated, fancy type shower rose with swivel joints 75mm dia with CP arm and fixing to steel pipe 15mm bore fixed as in repair complete all as specified and directed. |
| 54 | Supply and fixing chromium plated jet or health faucet with 01 m pipe for 15mm bore with fittings, fixed as in repairs complete all as specified and directed. |
| 55 | Supply and fixing CP soap dish fixed to wall with screw fixed as in repairs complete all as specified and directed. |
| 56 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/pedastal pattern etc , fixed as in repair complete all as specified and as directed. |
| 57 | S&F 125 mm dia CP Grating 125 mm dia with or without waste hole fixed in repairs including taking down the existing complete all as specified and directed. |
| 58 | M&L for PVC cover for water tank capacity exc 500 ltrs but n.exc. 1000 ltrs including fixing with MS hinges and staples made for purpopse fixed in repair complete all as specified and directed. |
| 59 | S & F in repair for internal fittings with handle etc for flushing cistern for PVC or vitreous china for 10 ltr cap fixed as in repair complete all as specified. |
| 60 | S&F 15mm bore PVC connection with brass nut of length 600mm fixed as in repairs including taking out the existing unserviceable complete all as specified and as directed. |
| 61 | M&L for plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device fixed in repair complete all as specified and directed. |
| 62 | S&F in repairs PVC waste down pipe 32 mm bore for WHB complete all as specified and directed. |
| 63 | S&F in repairs PVC waste down pipe 40 mm bore for sink / urinal complete all as specified and directed. |
| 64 | S&F in repairs 32mm brass C.P coupling for vitreous china SINK/WHB/Urinals etc with long screwed shank and fly nut complete all as specified and directed. |
| 65 | S&F in repairs 40mm C.P coupling for stainless steel sink etc with long screwed shank and fly nut complete all as specified and directed. |
| 66 | S&F 15mm bore Bib tap cast copper alloy with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed as in repairs complete all as specified and directed. Please Enable Macros to View BoQ information |
