Tender For Repairs To Sunken Floors And Seepagein Md Accn Bldgs, Plastering, Flooring And Other Related Works At Akash Vihar Under Ge (Af) Marathahalli Bangalore.
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
1 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Marathahalli → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Sunken Floors And Seepagein Md Accn Bldgs, Plastering, Flooring And Other Related Works At Akash Vihar Under Ge (Af) Marathahalli Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing servicable tiles to store and rubbish off the premises complete all as specified and as directed |
| 2 | M & L for Demolition of Cement Concrete (unreinforced) floor/ sunken floor of any description and in any position complete all as specified and as directed |
| 3 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc Complete and removing the rubbish off the premises to a distance n.exc.50m Complete all as specified and directed. |
| 4 | Material and labour for Rendering 15 mm thick on fair concrete surfaces of roofs in CM (1:3) finished even and fair without using extra cement mixed with 3% Integeral Water proofing compound by weight of cement complete all as specified and as directed by Engr-in-charge.(Note: Integral Water proofing compound will be measured and paid for separately). |
| 5 | M&L for wire brushing and cleaning top surface of tiles, cement concrete, including flashings and jounction of parapets etc and surface painting with a layer of blown grade bitumen of 85/25 penetration grade @ 1.20 Kg/Sqm and lightly tampered to the surface of sunken etc and S&F APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric land on primed surfaced by forced application complete all as specified. |
| 6 | Material and labour for PCC 1:5:10, type E-2, using 40 mm graded stone aggregate as in sunken slab filling. |
| 7 | Supply only integral water proofing compound . |
| 8 | M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed. |
| 9 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed. |
| 10 | M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm / 450x350x7mm, as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:3 complete all as specified & directed. |
| 11 | Demolition of cement concrete in roof incl existing roof treatement (other than ground floor) all as specified and as directed. |
| 12 | M & L for PCC (1:2:4) ype B0 by using 12.5mm graded stone aggregate asin padding over roof for filling depression and making proper slope complete all as specified and as directed. |
| 13 | Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and as direced. |
| 14 | Material and Labour for 10 mm thick rendering on roof surface in CM (1:3) surface finished fair and even using WPC @ 2% by weight of cement complete all as specified and directed. |
| 15 | M&L for labour for preparation of surface by removing dust, dirt and applying oil bound bitumen primer @0.20Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0Kg/sqm reinforced with non woven polyester matt weighing not less than160gm/sqm having softening point not less than 150̊ degree centigrade, having tensile strength of 650N/sqcm and 350N/sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of180N by torch application with minium 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumin 90/15 over the membrane @ 1.2Kg/sqm and on drying apply a coat of solar reflective bituminous aluminium paint over membrane @ 0.1kg/sqm all as specified and directed. |
| 16 | Supply only liquid water proofing compound. |
| 17 | Material and Labour for cutting grooves or chases , pinning in brickwork and making good to facing where required and pointing in CM (1:3) for tucking in edges of felt etc girth of chasing not exceeding 10cm complete all as specified and directed. |
| 18 | Removing building material etc.to a distance of 5km or under,beyond the lead included in the rates,including loading,unloading and stacking at the destination. |
| 19 | S&F rotational moulded polyethylene water storage tanks 700 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified & directed. |
| 20 | S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed. |
| 21 | S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for new tanks screwed for iron pipe and fixed (minimum weigth 455gms) complete all as specified & directed. |
| 22 | S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed. |
| 23 | S&F in repair 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. |
| 24 | Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 25 | Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 26 | S&F 20mm (OD)CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge |
| 27 | S&F 25mm (OD)CPVC Pipe SDR 11 & Plain CPVC SDR 11 Fittings such as Tee, Elbow, nipple and small piece of pipe in trenches or fixed to wall/Ceiling complete all as specified and as directed by Engineer-in-Charge |
| 28 | Taking up or down GI tubing 25mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 29 | Refixing 25 mm Old steel tubing and connection in Walls, Ceiling , floors etc all as specified and as directed by Engr in Charge. |
| 30 | S&Fin repair WHB vitreous china with pedestal ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete. |
| 31 | S&F in repairs Vitreous China Indian type water colset (Squat pattern) white complete excluding flushing cistern and flush pipe \\"Orissa\\" pattern size 580x400 with integral footrest including connection to trap, and to flushing pipe, anti syphonage pipe etc complete including making good to floor. |
| 32 | S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and excluding flush pipe and flushing cistern complete all as specified and as directed. |
| 33 | S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed |
| 34 | S&F in repair 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with pvc / alluminium frame and fixed to wooden plugs with chromum plated brass screws cup washers. |
| 35 | S&F 125 mm size fixed in repairs brass chromium plated shower roses /shower arms with or without swivel joints including fixing to steel pipe or union of 15 mm dia |
| 36 | S&F in repair 15mm bore Chromium plated long body bib taps with wall flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedin repairs complete all as specified & directed |
| 37 | S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified & directed. |
| 38 | S & F in repair Angle cock fancy type brass chromium plated screwed one ends for iron pipe or for unions and fixed 15mm dia pipes, complete all as specified and as directed. |
| 39 | S&F in repairs, CP health faucet with 1.25 mtr tube and hook complete all as specified and directed. |
| 40 | S&F in repair Two way bib cock 15 mm dia chromium plated complete fancy type of branded as specified and directed. |
| 41 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm |
| 42 | S&F in repair High density polyethylene pipe (HDPE) 40mm bore of pressure rating 6kg/cm2 fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 43 | S & F Tubular Towel rail 20mm dia D type 60 cm long fixed between flanges in repairs with brass chromium plated incl all fitting & fixtures complete all as specified |
| 44 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 45 | S&F in repair Plastic EWC Seat cover hygenic type for pedestral pattern including all fitting complete all as specified and directed. |
| 46 | S&F in repair PVC waste pipe, 32 mm dia, 750mm long, suitable for wash basin & Kitchen sink complete all as specified and as directed |
| 47 | S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe , overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete all as directed. |
| 48 | S&F in repairs stainless steel Kitchen plate rack of grade 304, weight not less than 3 kg and size 34\\"x35\\"x9\\" all as specified and directed by Engineer in charge. |
| 49 | Taking down rainwater pipes / drain pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete and Supply and fix PVC (SWR) pipes single socketed 110 mm bore fixed in walls/Sunken floor up to 6th floor complete all as specified and as directed by Engr-in-Charge. Note: Work may be executed in duct portion also. Necessary Safety precautions / Scaffolding for workers are to be taken by the contractor and No Extra cost will be paid for the Scaffolding and safety precautions of workers under any circumstances. |
| 50 | Taking down rainwater pipes / drain pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete and Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor up to 6th floor complete all as specified and as directed by Engr-in-Charge. Note:Work may be executed in duct portion also. Necessary Safety precautions / Scaffolding for workers are to be taken by the contractor and No Extra cost will be paid for the Scaffolding and safety precautions of workers under any circumstances. |
| 51 | Supply and fix PVC (SWR) bends with access door 110 mm bore of any radius. |
| 52 | Supply and fix PVC (SWR) bends with access door 75 mm bore of any radius. |
| 53 | S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 110 mm bore |
| 54 | S & F PVC (SWR) branch piece, single (single Y) equal or unequal of 75 mm bore |
| 55 | S & F PVC (SWR) branch piece, single (double Y) equal or unequal of 75 mm bore |
| 56 | Supply and fix PVC (SWR) door Tee of size 110 mm. |
| 57 | Supply and fix PVC (SWR) door Tee of size 75 mm. |
| 58 | Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor up to 6th floor complete all as directed. |
| 59 | S&F PVC (SWR) 'P' trap suitable for 110mm/100mm bore of pipes all as specified and as directed fixed in repairs. |
| 60 | M&L for PVC (SWR) floor trap75mm dia., plain with grating including jointing with solvent cement all as specified and as directed fixed in repairs. |
| 61 | S & F Stainless steel gratings with frame, 127 mm dia, with / without hole for waste pipe connection as in repairs all as specified and as directed. |
| 62 | M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth. complete all as specified and directed. |
| 63 | M&L Rendering 10mm thick in cement mortar 1:3 as in ceiling concrete surfaces including finishing even and smooth. complete all as specified and directed. |
| 64 | M & L for applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified and as directed. |
| 65 | M & L for applying two coats of distemper oil bound distemper on walls over a coat of primer including preparing newly plastered wall surfaces complete all as specified and as directed. |
| 66 | M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed. |
| 67 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate plinth protection finishing surface even and fair incl. making of groove as specified and directed. |
| 68 | M & L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base all as specified and directed. |
| 69 | M & L for 100 mm thick Cement concrete type B1 1:2:4 (20mm graded aggregate) in floor. Finished even and smooth with out using extra cement.all as specified and as directed. |
| 70 | M&L for Sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as directed. |
| 71 | M & L for Machine pressed pre cast concrete interlocking paver block any shape and size conforming to IS1 5658-2006 of 60 mm thickness of grade M-35 with grey cement and pigment all as specified and as directed. |
| 72 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,industrial type coloured, Pre polished,set, jointed and pointed in neat cement slurry with gray cement and pigments in floors incl. 20mm thick screed bedding layer in cm 1:4. all as specified and as directed. |
| 73 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed. |
| 74 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick backing coat in CM 1:3 complete all as specified & directed. |
| 75 | Demolition of cement concrete (reinforced)(other than ground floors), staircases, landing,chajjas and similar suspended work.(Note: Height of the building varies from 3m to 15m from GL) |
| 76 | M&L for Reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) as in slab supported on wall, beam ,roofs, landing, chajja, shelves etc all as specified and as directed. |
| 77 | M&L for mild steel bars 5 mm dia and over and upto including 10mm dia TMT bar, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed. |
| 78 | M & L formwork to sides and soffits ofchajjas, lintels for flat fair finished surfaces of concrete all as specified and as directed. |
| 79 | M & L for Formwork to soffits of suspended slabs such as lintels,chajjas and similar work , with supports and fair finished surfaces of concrete |
| 80 | M & L for Providing, cement concrete type B1 1:2:4 (12.5mm graded concrete) in lintels/chajjas upto 1.5m clear span, cills, steps; including weathering, slightly rounded or chamfered angles and throating, as directed |
| 81 | Dismantling of asbestos cement/galvanium sheet (corrugated or semi corrugated) sheets in roof covering. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed and specified by Engr-in-Charge |
| 83 | S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 84 | S&F prepainted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified and as directed.. |
| 85 | S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter, windtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as directed using mild steel Fe 410-W (Gde-E-250 quality A). |
| 86 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 87 | M&L Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M/L rendering 15mm thick in CM 1:4 on fair faces of brick or concrete and finishing the surfaces even and smooth without using extra cement in patch work at various places upto 6th storey incl necessary formwork complete all as specified & directed. |
| 89 | M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth complete all as specified and directed. |
| 90 | M&L Rendering 10mm thick in cement mortar 1:3 as in ceiling concrete surfaces including finishing even and fair. complete all as specified and directed. |
| 91 | Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint any tint over a coat of alkaline resistant primer, Complete all as specified and directed by Engr-in-Charge. |
| 92 | Demolation of Brick or stone masonry built in cement mortar. all as specified and directed. |
| 93 | M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc 10cm in width and setting in cement mortar 1:4, complete in walls all as specified and directed. |
| 94 | M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick/concrete complete all as specified and as directed. |
| 95 | M&L for Precast RCC cover slabs type B-1,1:2:4 in cm 1:6 (20 mm graded agg)supported on walls beams, landings, balconies, canopies, deck slabs,chajjas and in shelves and the like as man hole cover etc.all as directed. |
| 96 | M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, inculding cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (ennealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 97 | S&F MS Framed work such as Grills, Gratings & Cattle traps etc with ends of bars shouldered and / or riveted, or forged into spikes; Framed guard bars; barred iron doord; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works Confirming to Fe 290 Grade E-165.complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 13, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender