|
| 1 | Taking down old U/S DI / GI /PP-R tubing from the site and obtained in sch of credit as received form the site at item No 2 (a) & (b) complete all as directed by Engr-in-Charge. |
| 2 | Supply & laying of GI/DI pipe of the following sizes and grade complete with fittings (such as bends, elbows, tees, short pieces, connectors, caps, plugs, unions and screwed socket joints etc) laid in trenches complete as directed by Engr-in-Charge, of following sizes (Note when pipe laid in straight line then the 3rd length is required to be connected by union. :- |
| 3 | (a) GI pipe, Med grade 80 mm dia |
| 4 | (b) DI pipe , S/S including specials, Class “K-7” ,100 mm (4”) dia |
| 5 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of GI tubing in trenches and getting out all in hard and dense soil complete all as specified by Engineer - in - charge. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 7 | Removing excavated material (soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point. complete all as specified and directed |
| 8 | Taking down old unserviceable CI sluice valve for 80/100 mm dia pipe complete all as specified and directed |
| 9 | Supply & fixing cast iron sluice valve for water supply purposes with CI drilled flanged end internally cast for 100 mm nominal bore class PN 1.6 horizontal type conforming to IS 760, ISI marked with stainless steel spindle & iron wheel non using type including jointing material complete such as rubber assertion packing rings with requisite no of nuts & bolts , washers of requisite size etc all as specified and directed by the Engr-in-Charge. |
| 10 | Description all as per item No 7 here in before but here sluice valve internally cast for 150 mm nominal bore. complete all as specified and directed |
| 11 | Taking down old unserviceable non returing valve (NRV) of any size complete all as specified and directed. |
| 12 | S&F cast iron non return valve (NRV) or rerflex valve for water supply purpose, single door pattern for 100 mm bore pipe conforming to IS 5312-198, heavy duty ISI marked with CI drilled flanged ends (integrally cast) including packing material such as rubber inserting packing rings with requisite numbers of nuts & bolts washers of requisite size complete all as specified by Engr-in-Charge. |
| 13 | Description all as per item No 10 here in before but non return valve (NRV) or reflex valve of size 150 mm nominal bore. complete all as specified and directed |
| 14 | Taking down old unserviceable air release valve of size 80/100 mm complete all as specified and directed |
| 15 | S&F air release valve with double air outlet on existing DI/GI pipe of bore 80 mm complete with drilling, threading, welding and fixing of GI pipe medium grade 25 mm bore all as per site requirement. complete all as specified and directed |
| 16 | Description all as per item No 13 here in before but air release valve on DI/GI pipe of bore 100 mm complete all as specified and directed |
| 17 | S&F MCCB MCCB 3 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA with fixed thermal setting and fixed magnetic setting and connecting with armoured cable etc, complete all as specified and directed by Engineer-in-charge. |
| 18 | S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA with adjustable thermal setting (80 to 100 %) and connecting with armoured cable etc. complete all as specified and directed by Engineer-in-charge. |
| 19 | Taking out old unserviceable electric cable of size70 Sqmm, 3.5 core from excavated trench complete all as specified and directed. |
| 20 | Supply and laying PVC insulated armoured heavy duty electric cable with stranded aluminium conductor, 1100 V grade cross-sectional area 70 Sqmm, 3.5 core laid in trenches, ducts, fixing on walls with required clamps, cable glands, thimbles, jointing materials, insulation with proper colour coding etc. all as directed by Engr-in-Charge. |
| 21 | Material & Labour for PVC insulated and sheathed multi stranded flat 1100 volts grade submersible copper cable of size 10 sqmm 3 Core complete all as specified and directed by Engineer-in-charge. |
| 22 | All as per item No. 19 here-in-before but size 6 Sqmm 3 Core, complete all as specified and directed by Engineer-in-charge. |
| 23 | M&L for factory made un reinforced precast concrete cable cover class LV type I, flat size 250mm x 150 mm x 40 mm, complete all as specified and directed by Engineer-in-charge. |
| 24 | M&L for Sand cushioning to underground cables complete all as specified in Clause 19.75 of SSR Part-I laid before and after laying of cables, complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply, Install, Testing and Commissioning in replacement offactory made outdoor type dust and vermin proof(IP 54 protection) feeder Pillar LT Panel board cubicle double door hinged type of suitable size 415V AC, 50Hz, fabricated of GP/CRCA sheet 3.15mm(10 SWG) thick machine pressed and angle iron frame 50mm X 50mm X 6mm grouted in PCC 1:2:4 type BI (20mm grade stone aggregated) powder coated in Nine Tank process inside and outside complete including 4 Pole aluminum Bus Bar of suitable size mounted on porcelain insulator ,concealed hinged door with 3 Positioning door locking arrangement and enclosed in chamber made out of 2mm sheet thick GP/ CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles/lugs cable gland with open able shutters on both side and comprising of following :- |
| 26 | (i)MCCB 250 Amps 36KA 4pole with microprocessor release adjustable type of as a incomer-01(ii) MCCB 36 KA 4P 100Amp -02(iii) MCCB 36 KA 4P 63A -02(iv) Spare -01(v) Aluminium Busbar of 400 Amps phase+Nutral with insulated(vi) Digital Ammeter and volt meter of suitable sizeNote :-(i) The panel Make should be CPRI approved.(ii) Panel should be manufactured by Manufacturer itself (OEM) and Inspection will be done at the Factory premises before dispatch along with “HATCH TEST”.(iii) Before Placing the order the panel drawing should be approved by Engr-In-Charge. |
| 27 | M&L for earthing with copper earth plate electrode 600 x 600 x 3.15 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to copper strip of size 20 x 3 mm as earthing lead means of nut, bolts and washers made out of galvanised ireon mild steel and 40 mm dia GI pipe \\"light grade\\" for protection of earth lead and connected to contoll board or main switch or as directed by Engr -in-Charge including earthing pit in PCC (1:3:6) type C1 pre-cast cover RCC cover lab of size 300 x 300 x 100 mm with one handle made out of 8 mm dia round bar 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete shown in electrical plated No 3 and tesing complete. all as directed and specified by Engr-in-Charge |
| 28 | Materials and Labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for 20x3 copper strip using porcelain clit/post insulator including brazing if required complete all as specified and directed. |
| 29 | M&L for construction of stone masonry valve pit chamber of size 90 cm x 90 cm x 150cm (internal dimensions) including all necessary excavation and earth work in hard/danse soil and disposal of surplus soil to distance not exceeding 50 meters and depositing the same as directed including PCC in foundation of the mix (1:4:8) type D-2 stone masonry in cement mortor 1:4 rendering 15 mm thick in cement mortor 1:4 internally finished even and fair and pointing flush externally as the work proceeds in the same mortor as of stone masonry, including mild steel frame (made out of angle iron 40x40x6mm ) MS steel cover 3.15mm thick with handle and locking arrangements with hinges angle iron , flat as required at site including painting of all the exposed MS work with two coats of synthetics enamel paint over a coat of red oxide primer and painting all the steel surfaces embedded in PCC with two coats of black bituminous paint and all other relevant work complete all as specified and directed. |
| 30 | Supply and Fixing of pipe ductile Iron , S/S including specials, Class “K-7” ,150MM dia at different Pump House upto a height of 21 mtr including necessary connectors like clamps, bolts, nuts with T & P tools complete all as specified and as directed.Note:- (a) Contractor shall ensure all the safety aspects of manpower who deployed for working at site.(b) Necessay T&P for fixing of DI pipe with all sefety equipments shall be provided by the Contractor and no extra payment shall be paid on this account. Please Enable Macros to View BoQ information |
| 31 | Supply and Fixing of pipe ductile Iron , S/S including specials, Class “K-7” ,150MM dia at different Pump House upto a height of 21 mtr including necessary connectors like clamps, bolts, nuts with T & P tools complete all as specified and as directed.Note:- (a) Contractor shall ensure all the safety aspects of manpower who deployed for working at site.(b) Necessay T&P for fixing of DI pipe with all sefety equipments shall be provided by the Contractor and no extra payment shall be paid on this account. Please Enable Macros to View BoQ information |
