Tender For special Repair In Bldg No T-198 And Addn/Altn Of Bldg No T-395 (Offr Mess) & Provn Of Sewage Line & Drains Under Ge (W) Hisar At Hisar Mil Stn
Tender Value
47.78 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
4 days left
EMD
95600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair In Bldg No T-198 And Addn/Altn Of Bldg No T-395 (Offr Mess) & Provn Of Sewage Line & Drains Under Ge (W) Hisar At Hisar Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling framed trusses n exc.10m span complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for purlins,rafters complete all as specified and directed. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour Red/Blue etc. having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour red/blue etc. having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F of Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 7 | S&F of Joist, channel, angle or tee sections, fixed independently, without connecting plates etc. (cut to ordinary length i.e., within 20 mm of the length indicated) Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed. |
| 8 | M&L for Preparation of New steel surface of any description over 10 cm width or girth, not otherwise specified and applying two coats of synthetic enamel paint over red oxide primer complete all as specified and directed. |
| 9 | M&L for Preparation of Old steel Surfaces of any description, over 10cm in width or girth,not otherwise described, applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | S&F of Anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including dismantling of existing frame work for false ceiling, complete all as specified and directed. |
| 11 | M&L for 6mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid, including dismantling of existing boards any type, complete all as specified and directed. |
| 12 | S&F of Hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including taking down of existing wall panelling, complete all as specified and directed. |
| 13 | S&F of Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, wood grain printed PVC sheet used instead of plain colour sheet including taking down of existing wall panelling, complete all as specified and directed. |
| 14 | Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 15 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 16 | M&L for Cement concrete in foundations, filling and mass concrete 1:4:8 type D- 2, 40mm graded aggregate complete all as specified and directed. |
| 17 | Providing, cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating, as directed kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 18 | M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces incl necessary moulds and setting in CM 1:4 (reinforcement to be measured separately) complete all as specified and directed. |
| 19 | Taking down Cement plaster of any description upto roof on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 20 | Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement complete all as specified and directed. |
| 21 | Rendering 10mm thick CM 1:4 to brick work or concrete surfaces, trowelled to even and smooth finish w/o using extra cement complete all as specified and directed. |
| 22 | M&L for Preparation of New plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. |
| 23 | Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces, trowelled to even and smooth finish without using extra cement complete all as specified and directed. |
| 24 | M&L for Preparation of New plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 25 | M&L for preparing newly plastered surface of walls and applying two coats of OBD over plastered surface with alkali resistant priming paint complete all as specified and directed. |
| 26 | M&L for preparing old plastered surface of walls and applying one coat of OBD over plastered surface complete all as specified and directed. |
| 27 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new /old untreated surfaces complete all as specified and directed. |
| 28 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed. |
| 29 | Demolition of Cement Concrete (unreinforced) in Ground floor and pavings n exc 15cm thickness (Below or Above Ground level) complete all as specified and directed. |
| 30 | M&L for 75mm thick Cement Concrete, type C-2, 1:4:8 (40mm graded aggregate) in sub-base, complete all as specified and directed. |
| 31 | S&F of light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick CM 1:6 for laying floor finishes complete all as specified and directed. |
| 32 | S&F of Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 33 | M&L for Virified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed. |
| 34 | M&L for Virified Ceramic light shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick backing coat on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed. |
| 35 | S&F of white Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 36 | S&F of Chequered cement concrete tiles 20cm x 20cm x 25mm thick with Grey Cement and no pigment set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 37 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver interlocking block of M-35 grade with grey cement and no pigment approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand,( including sand cushioning ) complete all as specified and directed. |
| 38 | M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 39 | M&L, Hardcore of broken bricks of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 40 | M&L for 50mm thick,Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-base, complete all as specified and directed. |
| 41 | M&L for Chequered cement concrete tiles with grey pigment cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 42 | M&L for 50 mm thick cement concrete (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed. |
| 43 | M&L for 20mm thick granite stone slabs over and including 10 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete all as specified and directed. |
| 44 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 45 | S&F superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos for each opening and fancy type SS side knob of required shape and size 2 Nos of each opening as approved by GE and complete all as specified and directed. |
| 46 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed. |
| 47 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete all as specified and directed. |
| 48 | S&F Powder coated Anodised aluminium frame for doors, aluminium three track sliding windows and ventilators (is a combination of three track panels having two tracks of glass pane shutters and one track for wire mesh/aluminium grill to slide back and forth) with one or more rebates including joining cleats and rubbers as required for fixing etc. complete all as specified and directed. |
| 49 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, tower bolt 2 Nos in each door, 3 nos x hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note: Glass panes and wire cloth shall measured separately and Rubber beading will not be weighed and not to be paid seperately. |
| 50 | S&F Powder coated Anodised aluminium sliding windows & ventilator shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.Note : (i) Glass panes and wire cloth shall be measured & paid separately. (ii) Rubber beading will not be weighed and not to be paid seperately. |
| 51 | S&F sheet glass 3 mm thick ordinary quality in squares n exc 0.5 sq m each pane, including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed. |
| 52 | S&F of 4.8mm thick Sheet glass, ordinary quality, glazed with oil putty in squares n exc 0.5 sq. m each pane, including Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 53 | S&F powder coated of any colour aluminium deco grill of 4 mm dia (powder coating not less than 50 micron) complete all as specified and directed at site. |
| 54 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 55 | S&F of Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 56 | S&F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 57 | S&F of 40mm size Butt hinges, Medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 58 | S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed. |
| 59 | S&F of Aluminium Die cast body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 60 | S&F Floor door stopper of aluminium alloy body 150mm long with rubber shoes complete all as specified and directed. |
| 61 | S&F 140 mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 62 | S&F of Aluminium anodised, barrel tower bolts of extruded section and fixed 150mm complete all as specified and directed. |
| 63 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 64 | S&F of Aluminium Mortice lock, vertical type of 2 levers of size 100 mm complete all as specified and directed. |
| 65 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 66 | Dismantling old unserviceable cabinet with shutter, complete all as specified and directed. |
| 67 | S&F of 18mm thick PVC solid board for making modular kitchen cabinet , cupboard with partition and door, complete all as specified and directed. |
| 68 | S & F of Continuous (piano) hinges of width of flap 40mm, mild steel, bright finish or electrogalvanised, fixing only complete all as specified and directed. |
| 69 | S&F of Brass handles, cast type, polished bright of 150mm length complete all as specified and directed. |
| 70 | M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6, including dismantling existing tiling, complete all as specified and directed. |
| 71 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick backing coat on fair faces of brick work or concrete surfaces in CM 1:4, including dismantling existing tiling, complete all as specified and directed. |
| 72 | S&F in repairs of Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified and directed. |
| 73 | S&F in repairs of 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 74 | S&F in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed |
| 75 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps,waste, chain and plug and porcelain stopper but including brackets,cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 76 | S&F in repairs Brass chromium plated shower rose of 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 77 | S&F in repair Wall Mixer 3-in-1 system with telephonic shower rose with 115mm bend pipe and aerator complete all as specified and directed. |
| 78 | S&F of 20mm bore size Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repairs of Fancy type 20mm bore dia, Chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 80 | S&F in repairs of 20mm bore dia Fancy type,chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 81 | S&F in repairs of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 82 | S&F of Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 83 | S&F of Soap dish vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 84 | S&F in repairs of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 85 | Dismantling of cast iron or RWP or eaves gutter or reinforced concrete drain pipes of any dia., jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 86 | S&F of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,jointed by solvent laid in trenches or in floors complete all as specified and directed. |
| 87 | S&F of 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,jointed by solvent laid in trenches or in floors complete all as specified and directed. |
| 88 | S&F of 75mm bore dia PVC (SWR) bends any radius complete all as specified and directed. |
| 89 | S&F of 110mm bore dia PVC (SWR) bends any radius complete all as specified and directed. |
| 90 | S&F of 75mm bore dia. PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 91 | S&F of 110mm bore dia. PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 92 | M&L for 75mm outlet dia. Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 93 | Taking up or down 15mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 94 | Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 95 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 96 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 97 | S&F of Brass elbow for special fittings of 20mm outer dia CPVC pipes, complete all as specified and directed. |
| 98 | S&F of Brass elbow for special fittings of 25mm outer dia CPVC pipes, complete all as specified and directed. |
| 99 | S&F of Brass Tee for special fittings of 20mm outer dia CPVC pipes, complete all as specified and directed. |
| 100 | S&F of Brass Tee for special fittings of 25mm outer dia CPVC pipes, complete all as specified and directed. |
| 101 | S&F of 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, including dismantling existing water tanks, complete all as specified and directed. |
| 102 | S&F of 25mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 103 | S&F of 25mm Fancy type Chromium plated Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed. |
| 104 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Clerestory windows & other Frames/ Chowkhat of size 65mm*125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note : M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 105 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 106 | S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 107 | S&F of Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed. |
| 108 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 109 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 110 | Removing excavated material(Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 111 | Demolition and breaking up drain pipe of 200mm and 150mm bore dia(Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 112 | M&L for Concrete bed to drain pipes of 150mm bore dia. including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:4:8 type D-2 complete all as specified and directed. |
| 113 | S&F of 150 mm Reinforced concrete pipes, class NP 3 with one collar per length of pipe complete all as specified and directed. |
| 114 | M&L for Concrete bed to drain pipes of 200mm bore dia. including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:4:8 type D-2 complete all as specified and directed. |
| 115 | S&F of 200 mm Reinforced concrete pipes, class NP 3 with one collar per length of pipe complete all as specified and directed. |
| 116 | M&L High strength deformed TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 117 | M&L for Cutting into existing manholes for 150mm dia connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed. |
| 118 | Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as specified and directed. |
| 119 | M&L for Cement mortar 1:4 Flush pointing to brick walls complete all as specified and directed. |
| 120 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed. |
| 121 | M&L for Hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 122 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing surface etc complete and directed by engr in charge |
| 123 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic NEW concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed. |
| 124 | Description all as per item No 133.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 125 | Description all as per item No 133.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 126 | Description all as per item No 133.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board, complete all as specified and directed. |
| 127 | Description all as per item No 133.00 above but point wiring with 4 sq mm single core FRLS cables and earth continuity wire with 4 Sq mm single core cable connected to earth plug socket for AC complete all as specified and directed. |
| 128 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed. |
| 129 | S&F Modular switch 1 way 16A 1 module complete all as specified and directed. |
| 130 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 131 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. |
| 132 | S&F Modular lamp holder, insulated body with back plate & LED Bulb suitable for batten fittings and complete all as specified and directed |
| 133 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 134 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed |
| 135 | S&F modular type (1/2 modular as per site requirement) ceiling fan regulator electronic step type suitable for 1200/1400 mm sweep fan complete all as specified and directed |
| 136 | S&F LED light fitting 20watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification (i) surge protection of minimum 2 KV (ii) power factor should be more than 0.90 (iii) cool white colour, (iv) total hormonic distoration (THD) should not be more than 15% (v) lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin (ix) Minimum warranty period of 2 Years. |
| 137 | S&F LED light fitting 40watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any crack. The fitting should have following technical specification (i) surge protection of minimum 2 KV (ii) power factor should be more than 0.90 (iii) cool white colour, (iv) total hormonic distoration (THD) should not be more than 15% (v) lumen output should not be less than 1700 lumens, (vi) can withstand with input voltage range 140-280V AC, (vii) colour rendering index should not be less than 80, (viii) Corelated colour should be minimum 6000 degree Kelvin (ix) Minimum warranty period of 2 Years. |
| 138 | Supply & fixing in replacement Cool/Warm White LED light fittings 36 watt diffuser type Recess/Surface Mounting type, with mounting arrangement (Recess suitable for, 2x2 grid, Hanging) CCT 6500K, powder coated CRCA sheet with high quality LGP and PMMA diffuser, Separate HPF driver suitable fpr armstrong and grid ceiling LED 240 volt alongwith fixing arrangements completed all as specified and directed. |
| 139 | S&F Sheet metal enclosure distribution board SPN, 12 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed. |
| 140 | Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB |
| 141 | Supply and fixing MCBs SPN 32 Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB |
| 142 | S&F Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCCB as incoming and MCB's as outgoing in DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar and grouting, fixing on wall with nut bolts washers proper with PCC works complete all as specified and directed. |
| 143 | Supply and fixing MCCBs FP 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.Note : Make of the MCCB should be the same as that of DB |
| 144 | Supply & fixing in replacement of Bldg security light fitting LED 30 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. complete all as specified and directed. Make Bajaj/Halonix/Orient |
| 145 | Taking down carefully copper/aluminium Submain wiring from battan/conduit from DBs, MCBs etc) and making good to disturbed surfaces of walls, floor etc complete all as specified and directed. |
| 146 | M & L for submain wiring alongwith earth wire with the 2x10.0 sq. mm +1x10.0 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required complete all as specified and directed.Note :The above mentioned specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length. |
| 147 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP complete all as specified and directed. Please Enable Macros to View BoQ information |
| 148 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 AMP complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender