Tender For Special Repairs To Bldg No Iv At Mh Wellington And Special Repair/ Replacement Of Gi Pipes Into Di Pipes Of Ava Hill And Lake View Area And Certain Minor Work Under Ge Wellington 8211/E8
Tender Value
43 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
2 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wellington → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No Iv At Mh Wellington And Special Repair/ Replacement Of Gi Pipes Into Di Pipes Of Ava Hill And Lake View Area And Certain Minor Work Under Ge Wellington 8211/E8
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
| 2 | 06-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement corrugated, semicorrugated sheeting, any gauge and thickness in roof coverings including Nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete roofs, floors (other than ground floors), beams, staircase, landing, chijjas and similar suspended work complete all as specified and directed. |
| 3 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.Note: The colour and design patten shall be as directed. |
| 4 | Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas etc fixed with self tapping screws all as specified and directed. |
| 5 | Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed. |
| 6 | Demolition of cement Concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness including floor finishing complete all as specified and directed. |
| 7 | 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base floor and finished even and fair complete all as specified and directed. |
| 8 | Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 9 | Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in mortar 1:6 type C1, 1:3:6 using 20mm graded stone aggregate complete all as specified and directed |
| 10 | Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed. |
| 11 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed. |
| 12 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed. |
| 13 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 14 | Reinforced cement concrete (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and similar work complete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed. |
| 16 | Taking down cement or cement lime plaster, any description on brick, concrete or stone walls or ceiling including raking out joints, hacking for key, scrubbing down with water, etc, and removal of rubbish off complete all as specified and as directed. |
| 17 | Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 18 | Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat of 3mm thick putty including preparation of surfaces complete all as specified and as directed. |
| 19 | Taking down PVC / wooden chowkat or frame with shutter (without taking off shutters from the frames) not exceeding 1.5Sq mtr all as specified and directed. |
| 20 | Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing as mentioned in SSR all as specified and directed. |
| 21 | Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed. |
| 22 | Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement slurry to match the surface over and including 20mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 23 | Vitrified coloured ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, as in skirting/, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement slurry to match over and including 10mm cement plaster as backing coat in cement mortar 1:4 complete all as specified and directed. |
| 24 | Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 600x300x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:3 on fair face of brick/stone or concrete surface complete all as specified and directed. |
| 25 | Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.09 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed. |
| 26 | Preparation of old painted steel surfaces and steel based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 27 | Preparation of old painted wooden surfaces and wood based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 28 | Complete removal of existing treatment of wall surfaces and applying two coats of distemper oil emulsion (washable) over a coat of primer (water thinable/ solvent thinable), over one coat of 3mm thick white wall care putty even and smooth complete all as specified and directed. |
| 29 | Complete removal of existing treatment of wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed. |
| 30 | Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 31 | Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets and frame work all as specified and directed. |
| 32 | GI frame work for grid of size 605mm x 605mm seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed. |
| 33 | 12 mm thick Gypsum Board in ceiling fixed with screws as per manufacturers instructions complete all as specified and as directed. |
| 34 | Applying two coats of distemper oil emulsion on ceilings over priming surfaces with alkali resistant priming paint over one coat of 3mm thick putty including preparation of surfaces complete all as specified and as directed. |
| 35 | Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe, 32mm seat and PVC seat cover black closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed. |
| 36 | PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket fixed in repairs complete all as specified and directed. |
| 37 | Vitreous china wash basin, white, flat back, size 550x400 mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32 mm bore and of suitable length, 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15 mm size with PTMT nuts of length 450 mm and fixed in repairs complete all as specified and directed. |
| 38 | Stop/ angle valves fancy type chromium plated cast copper alloy screwed both ends 15mm bore for iron pipe or for unions and fixed in repairs all as specified and directed. |
| 39 | Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 40 | PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed. |
| 41 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store for 15mm bore pipe all as specified and directed |
| 42 | Concealed steel water tubing 15mm bore dia medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete including cutting and chasing of stone wall all as specified and directed. |
| 43 | Vitreous china soap tray soap dish, vitreous china white, approximate size 160x160x90mm embedded in the wall and fixed in repairs complete all as specified and directed. |
| 44 | 600mmx450mmx5.5mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 45 | Plug type bib taps of size 15mm, cast iron, screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 46 | Stainless steel plate rack of 0.80mm thick approved quality of size 0.610M x 0.914M x 25.4mm complete all as specified and directed. |
| 47 | Taking down old unservicable GI pipe, supply and lay ductile iron pipe of size 100mm diameter, sipgot socket type, class K-9 conforming to IS-83269:2000 with cement mortar lining with portable slag cement as per relevant IS code, with metalic zinc coating with finishing layer of bituminous coating as per relevant IS inlcuding all accessories, tyton joints of EPDM gasket and fitting specials complete all as specified and directed. |
| 48 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete all as specified and directed. |
| 49 | Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cms thick etc in soil complete all as specified and directed. |
| 50 | Removing excavated soil/ material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 51 | Sluice valve both ends flanged of class PN 1.6 of size 100mm dia with all required necessary accessories complete all as specified and directed. |
| 52 | Ductile iron specials such as bends, tapers, tee pieces (single and double branch) any type and angle / radius and straight connecting piece but all ends socketed / flanged of size 150mm dia bore all as specified and directed. |
| 53 | Construction of brick masonry valve chamber 230 mm thick wall of 1200 mm x 1200 mm x 860mm ht internal size, for valves of size more than 100mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B -1 using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete all as specifed and direted. |
| 54 | Taking down aluminium/ copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed. |
| 55 | Point wiring concealed complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, sheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit suitable for modular controled point wiring complete with fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated sheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed.Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.2. Cutting chases in stone masonry wall will be measured and paid separately. |
| 56 | All as per Item No 55 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed. |
| 57 | All as per Item No 55 hereinbefore but point wiring complete with 2.5 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed. |
| 58 | Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed. |
| 59 | Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed. |
| 60 | Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed. |
| 61 | Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed. |
| 62 | Modular Metal Flush Box 1/2 module all as specified and directed. |
| 63 | Modular Metal Flush Box 3 module all as specified and directed. |
| 64 | Modular Metal Flush Box 6 module all as specified and directed. |
| 65 | Modular White Cover Plate with Frame 1 module all as specified and directed. |
| 66 | Modular White Cover Plate with Frame 2 module all as specified and directed. |
| 67 | Modular White Cover Plate with Frame 3 module all as specified and directed. |
| 68 | Modular White Cover Plate with Frame 6 module all as specified and directed. |
| 69 | Taking down old unservicable FTL fittings, Supply and fix 25W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed.Make. Havells Cat Part No. LHEXAWPN71N1W025 or equivalent make in CG/ Philips / Bajaj. |
| 70 | All as per item No 69 hereinbefore but 2 feet, 10watts all as specified and directed. Make. Luker Product code - LT510P or equivalent make in CG/ Philips / Bajaj. |
| 71 | Taking down old unservicable LED dimmable LED panel size 595mmx595mm, 40watt, 6000K, 100 Watts/ Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light coplete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Luker Product code- LPS40/ Halonix Code- HLFPR22-11-40-CW-37mm-WC. |
| 72 | GI Pipe Medium Grade 32 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers including taking down old brackets complete all as specified and directed. |
| 73 | Material and labour for LED Security Light fitting of 35 Watt comprising of eposy powder coated housing enclosed with glass cover in frame with protection IP 66 complete with all accessories and lamp colour white, 110 Lumen/watt all as specified and directed. Make- Luker Product code- LSTE-20 or equivalent in Panasonic/ Phillips/ CG |
| 74 | Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 12 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. |
| 75 | Supply and fix exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers including making opening brick/ ston masanory wall as per requirement of Exhaust fan and make good and matching with existing surface complete all as specified and directed. Make : Crompton Greaves/ Havells / Bajaj |
| 76 | Supply and fix 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles netural and current carrying capacity 32 AMPS, in the MCB DB Complete with connection testing and commissioning all as specified and directed. |
| 77 | All as per item No 76 hereinbefore but SP 6 to 32 Amps capacity all as specified and directed. |
| 78 | Taking down submain wiring with aluminium/ copper conductor along with PVC conduit and material and labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM |
| 79 | Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion. |
| 80 | Cutting chases in brick masonry wall / concrete floor/ roof for laying PVC conduit and making good to facings where required and pointed in cement mortar 1:3 and making good cutting, exceeding 10cm grith all as specified and directed. |
| 81 | Schedule of Credit (Minus) Rs. 70562.00 NOTE: Bidder shall insert credit amount of Rs. 70562.00 as rate in Green field under Col-5. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender