|
| 1 | Demolition of PCC in any description and in any position etc complete all as specified at site and directed. |
| 2 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 3 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors all as directed. |
| 4 | M&L for rendering 15 mm thick in cement mortar 1:3 Mixed with Water proffing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified |
| 5 | M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.Note :- Supply of water proofing compound shall be measured and paid separately. |
| 6 | Dismantling floor/hearth or wall tiling including cement mortor bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 7 | M&L 25mm thick PCC 1:2:4 type B0(using 12.5 mm grd agg) in floors as sub base of floor or floor finishing complete. |
| 8 | M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles as directed. |
| 9 | M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), , complete all as specified and directed. |
| 10 | M&L glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 11 | M&L for 8mm thick vitrified ceramic tiles light shade (Square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. |
| 12 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and directed. |
| 13 | M&L for 8 mm thick vitrified ceramic tiles as in vertical surface such as skirting, dados, steps etc and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed plaster 10mm thick in CM (1:4) on stone masonry surfaces complete all as specified and directed. |
| 14 | M&L for non skid coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in vertical surface as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor including screed plaster 10mm thick in CM (1:4) on stone masonry surfaces complete all as specified and directed. |
| 15 | M&L for High glossy light/dark shed Valenza Glazed ceramic tiles 8-9 mm thick (square/ rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,polished, in floors etc.jointed in neat cement slurry and laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.pointed in white or coloured cement to match complete all as specified and directed. |
| 16 | Material & Labour glazed ceramic coloured tiles 1200x600x7-8 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dadocomplete all as specified and as directed. |
| 17 | M&L Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed. |
| 18 | M&L, sand cushioing to under concrete interlocking paver block including watering & consolidation complete all as specified |
| 19 | M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 20 | M&L Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandt complete all as specified and directed. |
| 21 | M & L Machine cut kota stone slab flooring 18-22mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed |
| 22 | M & L Machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting, dado & pillar over and including 15mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 23 | M&L for 15-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete. |
| 24 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed. |
| 25 | S&F factory made solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification, drawing and colour etc complete all as specified and as directed by engr in charge . |
| 26 | S&F factory madeFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 27 | S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-1 and fixed etc complete and as directed. Make for builders hardware fittings |
| 28 | S&F aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long etc complete all as specified and directed. |
| 29 | S &F 150 mm size Aluminium handles, cast type, anodised and fixed etc complete all as specified and directed. |
| 30 | Demolition of PCC in any description and in any position etc complete all as specified at site |
| 31 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified |
| 32 | M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth without using extra cement complete all as specified |
| 33 | S&F in repair Vitreous china squatting pan, 'orissa' pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed. |
| 34 | S &F in repair EWC (Pedestal pattern) including P or S trap and connection to drain or out going pipe and to flusing pipe and including making good to floor to match with adjoining surfaces all as directed and including Taking out existing water closet etc complete . Make : Hindware/ Cera /Parryware |
| 35 | S &F in repair plastic seat cover heavy duty closed pattern with flat bottom and cover and mild steel CP hinging device etc complete . |
| 36 | S&F in repair brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed. |
| 37 | S/F in repair brass chromium plated health faucet for EWC screwed down to GI tubing/fittings 15mm dia incl 1250mm long stainless steel connection complete all as specified and directed. |
| 38 | S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, push tap (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed . Make : Parryware/CERA/Hindware/Johnson |
| 39 | S&F in repair cast copper alloy CP toilet paper holder fixed to wall etc complete . |
| 40 | Supply and fix in repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and connection complete all as directed complete all as specified and as directed. |
| 41 | Supply and fix in repair vitreous china wash basin white flat back size 630x450mm including cutting for and pinning in ends of brackets or erecting stand,waste coupling,32 mm bore PVC waste pipe of suitable length, and pvc connection complete all as directed complete all as specified and as directed. |
| 42 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 43 | S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4). |
| 44 | Supply only PVC waste pipe with 32 mm bore and 65 cm long with cap complete all as specified and directed. |
| 45 | S&F in repair brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed all as directed. |
| 46 | S&F in repair 15 mm bore Pillar tap , Fancy type , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete |
| 47 | S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges all as specifed and directed. |
| 48 | S & F CP Towel ring, complete all as specified and directed |
| 49 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete and as directed . |
| 50 | Supply and fixing CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S &F in replacement glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60cm long fixed to wall with screws in position complete all as directed |
| 52 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size,including fixing of steel pipe or union and fixed all as directed |
| 53 | S&F in repair Bib taps, cast copper alloy, cromium plated with crtuch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and directed. |
| 54 | S&F in repair angle cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed. |
| 55 | S&F in repair concealed stop cock fancy type CP cast copper alloy screwed down high pressure with crutch or buttor fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed. |
| 56 | S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed. |
| 57 | S&F in repair CP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge |
| 58 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 15mm dia bore |
| 59 | Taking up or down existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as dircted for 20mm dia bore |
| 60 | Supplying, fixing, jointing and testing Supplying and laying of CPVC pipes pittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for 15 mm dia bore |
| 61 | Supplying, fixing, jointing and testing Supplying and laying of CPVC pipes pittings in trenches/wall complete all as specified. with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for 20 mm dia bore |
| 62 | Fixing only old steel tubing and connections obtained from taking down against item No 8(a), (b) & (c) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings for 15mm dia bore |
| 63 | Fixing only old steel tubing and connections obtained from taking down against item No 8(a), (b) & (c) herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings for 20mm dia bore |
| 64 | M&L for Cutting chases , pinning in making good to facing for concealed water tubing n.exc. 10 cm girth and making good with (1:3) cement mortar complete all as specified and directed. |
| 65 | S&F rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling existing complete all as specified and as directed. |
| 66 | Fixing only old rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling existing complete all as specified and as directed. |
| 67 | S&F 1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed. |
| 68 | Fixing only old1000 ltr capacity rotational moulded polythene tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing complete all as specified and as directed. |
| 69 | S & F 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 20mm 210 gm) complete all as specified. |
| 70 | S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 71 | Dismantling any bore, cast iron or reinforced concrete or PVC pipes for rain water ,drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.. |
| 72 | S&F PVC (SWR) pipes single socketed, in any length with clamp out of 25x3mm flate Iron including bolts and nuts rubber ring joints, fixed to wall 75 mm bore complete all as specified and as directed. |
| 73 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 74 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore. |
| 75 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 76 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 77 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 78 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. |
| 79 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 80 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 81 | Demolition of brick work built in cement mortar complete all as specified and directed |
| 82 | M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. |
| 83 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc. complete all as specified and as directed. |
| 84 | M & L 15 mm thick rendering in cement mortar 1: 6 on other than fair face of brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 85 | M&L for rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 86 | M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD over two coat in two layer of putty complet all as specified and as directed. |
| 87 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 88 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 89 | Demolition of reinforced cement Concrete of any description and in any position disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge. (Reinforcement shall be cut as required to facilitate demolition) complete all as specified and directed. |
| 90 | M & L for precast reinforced cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in landings,cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed. |
| 91 | M & L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
