Tender For Provn Of A Veh Garage Hardstanding Stone Floor For A Veh Repair And Provn Of Covered Area Outside Gynac Dept Bldg No-2030 At Hisar Mil Stn Under Ge (W) Hisar
Tender Value
41.33 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
2 days left
EMD
82700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of A Veh Garage Hardstanding Stone Floor For A Veh Repair And Provn Of Covered Area Outside Gynac Dept Bldg No-2030 At Hisar Mil Stn Under Ge (W) Hisar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil complete all as specified and directed. |
| 2 | Removal of excavated material to a distance exc. 500m but n. exc. 1.5km and depositing where directed complete all as specified and directed. |
| 3 | M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for rolled sections as in tubular trusses / rafter / purlin fixed with angle cleats or other connecting plates, other iron work confirming to FE-410 (Gde-E-250) quality B complete for holding galvallume sheeting in passage and complete all as specified and directed. |
| 5 | S&F plates (plain or chequered) channels, square cut or notched ( ordinary and couner sunk) forming holes, without any attachment including welding etc all as specified and directed by E- in- charge. Fe-410-W (Gde-E-250) quality B complete all as specified and directed. |
| 6 | M&L for Preparing new steel surfaces of any description exc 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | S&F Pre-painted galvallume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | M&L Pre-painted galvallume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, sheeting of any colour having tensile strength of 550 Mpa as in ridges etc. complete all as specified and directed. |
| 9 | Excavation over areas, not exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. |
| 10 | Rolling and consolidating formation of surface of road in cutting/filling with power road rolletr exc 8 to12 tonne including filling depression which occures during the rolling complete all as specified and directed. |
| 11 | Granular sub base 100mm thick with sShingle or gravel spread thickness, spread, rolled and consolidated to gradient and camber for road side required and complete all as specified and directed. |
| 12 | M&L for Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) complete all as specified and directed. |
| 13 | M&L for 150 mm WBM in two layers each layer 7.5 cm thick ( compacted thickness), with granite or basalt coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size) , spread, rolled and consolidated to gradient and camber with power road roller exc 8 to 12 tons required complete all as specified and directed. Note : 150mm compacted thickness shall be measured for payment purpose. |
| 14 | M&L for sett flooring with stone sett flooring with stone setts of size 200 to 250 mm long , 150 to 200 mm wide and 150 mm deep and sides dressed; bedded in cement mortar 1:3 and 20 mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed. |
| 15 | M&L for Edge stones to flooring with stone setts of size 250 to 300 mm long and 150 to 200 mm wide, and 450mm deep and sides dressed; bedded in cement mortar 1:3 , joints 20 mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed. |
| 16 | M&L for providing cement concrete 1:2:4 type B1 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 17 | Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed. |
| 18 | Description all as per item No 17.00 (here-in-before) but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 19 | Description all as per item No 17.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 20 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed. |
| 21 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 22 | S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 23 | S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed. |
| 24 | S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and directed. |
| 25 | S&F BLDC type ceiling fans complete with blades, down rods (2to3 feet long), electronic regulator and accessories 230 volts with minimum air delivery 245 CFM, 1200 mm sweep size, white in colour with remote control & copper winding, BEE 5 star rated all as specified and directed by E- in- charge. Make CAT part no. HAVELLS Epic Signia and equivalent make of Bajaj / Crompton. |
| 26 | S&F Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed. |
| 27 | Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. :-Note : Make of the MCB should be the same as that of DB |
| 28 | Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed.:-Note : Make of the MCB should be the same as that of DB |
| 29 | S&F service wire size 10 sqmm 2 core with GI wire complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender