|
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in cement mortar, etc complete all as specified and directed. |
| 2 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment laid etc complete all as specified and directed. |
| 3 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment laid except tiles etc complete all as specified and directed. |
| 4 | M&L for sand cushioning under floors or foundation over concrete surfaces, spread complete all as specified and directed. |
| 5 | M&L for Rubber moulded Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors, laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 6 | M&L for Rubber moulded Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors, laid over and including 20 mm thick screed bed in cement mortar 1:4 except tiles complete all as specified and directed. |
| 7 | M&L for Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc. exc. 25 but n.exc 50 sq.cm etc complete all as specified and directed. |
| 8 | M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in sub-base complete as specified and as directed. |
| 9 | ML for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required etc complete all as specified and directed. |
| 10 | Demolition of brick work/precast concrete block masonary or stone masonary article built in cement mortar etc complete all as specified and directed. |
| 11 | Material and labour for precast cement concrete solid building blocks masonary exe 10 cm in width and setting in mortar 1:4 type C-1 1:3:6 (20 mm graded agregate) complete all as specified and as directed. |
| 12 | Material and labour for precast cement concrete solid building blocks masonary exe 10 cm in width and setting in mortar 1:4 type C-1 1:3:6 (20 mm graded agregate) except blocks complete all as specified and as directed. |
| 13 | Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc. exc 15cm thickness (below or above ground level) and removing debris from site complete all as spcified and as directed. |
| 14 | Material and labour for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed. |
| 15 | M&L Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms, moulds,miterd/stopped ends etc complete all as specified and directed. |
| 16 | Taking down cement plaster of any descreption and in any position of brick or concrete surfaces & racking out joints hacking for key, scrubbing down with water etc all as specified and directed |
| 17 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on brick / concrete surfaces, finished fair and even without using extra cement all as specified and as directed. |
| 18 | M&L for preparation of new concrete surfaces of walls of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer all as specified and as directed. |
| 19 | M&L for preparation of old concrete surfaces of walls of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint all as specified and as directed. |
| 20 | Dismantiling posts (or) struts (wood), RCC (or) steel any section , including taking out embedded portion and making good distrubed ground concrete brick work masnory etc complete all as specified and directed. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed. |
| 22 | Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm ,watering and removing surplus soil to a distance n.exc 50 mtr and making good surface etc complete all as specified and directed. |
| 23 | Material and labour for plain cement concrete 1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed. |
| 24 | S&F Joist, channel, angle or tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A etc complete all as specified and directed. |
| 25 | S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe-290 Gde E-165 etc complete all as specified and directed. |
| 26 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 27 | Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire etc complete all as specified and directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straning bolts, etc. including provision of binding wire etc complete all as specified and directed. |
| 29 | M &L for Welding in repairs n. exc 2.5cm in length and exc 6mm thick etc all as specified and directed |
| 30 | S & F 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A etc complete all as specified and directed. |
| 31 | S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to be fitted with washers and one hexagonal or squre nut, exceeding 5 cm and not exceeding 10 cm long etc complete all as specified and directed. |
| 32 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (Note :- each line wire to be measured) |
| 33 | S & F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE 410-W(Gde -E-250) quality-A all as specified and as directed. |
| 34 | M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
| 35 | M&L for preparing old steel surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
| 36 | Material and labour for Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in coping/benching including necessary form work etc complete all as specified and directed. |
| 37 | Cleaning of PCC / stone masonry / brick masonry drains not exceeding 1.5 metre deep by removing of deposited soft / loose soil and other foreign materials not exc 30 cm deep and average 15 cm deep and removal of excavated material to a distance exc 1 km but n.exc 2 km etc complete all as specified and directed.Note:- width of bottom of drain multiplied by the length of drain cleaned shall be measured for payment. |
| 38 | M&L for removing of existing grill/grating laid over existing drain and refixing after cleaning of drain incl cement mortar, welding etc reqd for strengthening of the drain covers complete all as specified and as directed. Note:- width of the drain cover multiplied by the length of drain cleaned shall be measured for payment. Please Enable Macros to View BoQ information |
