|
| 1 | M&L for brick work with modular size burnt fly ash bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6) including demolition old brick work set in cement mortar complete all as specified and directed. |
| 2 | All as per item No 1.00 above but except brock.Note: Old serviceable bricks shall be re-used. |
| 3 | M&L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including taking down plaster complete all as specified and directed.Note: WPC shall be measured and paid seperately. |
| 5 | M&l for rendering 5mm thick in on ceiling concrete surface using mortar (1:3) mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including taking down plaster complete all as specified and directed.Note: WPC shall be measured and paid seperately. |
| 6 | Supply ony liquid water proofing compound complete all as specified and directed. |
| 7 | M&L for complete removal of existing treatment of wall surfaces/ plastered surfaces of wall, pilesters,cornices etc applying of two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall applying of three coat of white wash on ceiling etc complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfeces and applying of two coat of oil bound distempering and over one coat of chalk whiting/cement based wall primer complete all as specified and directed. |
| 10 | M&L for Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of any colour including demolition of existing stone salb set in cement mortar complete all as specified and directed. |
| 11 | M&L for 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar (1:4), laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing including demolition of existing stone salb set in cement mortar complete all as specified and directed. Note: The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 12 | All as per above item No 11.00 above but as in riser of steps, skirting, dado and vertical surfaces over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 13 | Rounding to edges of stone slabs such as granite, kota stone etc one edge such as steps cooking platform and other similar situations complete all as specified and directed. |
| 14 | M&L for grinding cutting and polishing to surfaces of existing kota stone floor/skirting/dado complete all as specified and directed. |
| 15 | M&L for chequered cement concrete tiles 40cm x 40cm x 25 to 30mm thick (Glosy finished) with grey cement and pigment over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete including demolition of existing tile set in cement mortar complete all as specified and directed. |
| 16 | All as per item No 15.00 above but except chequered cement concrete tilesNote: Old chequered tiles shall be re-used. |
| 17 | M&L for chequered cement concrete tiles 20cm x 20cm x 25 to 30mm thick (Glosy finished) with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete including demolition of existing tile set in cement mortar complete all as specified and directed. |
| 18 | All as per item No 17.00 above but except chequered cement concrete tilesNote: Old chequered tiles shall be re-used. |
| 19 | M&L for precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile complete including demolition of existing paver block set in cement mortar complete all as specified and directed.Note: Stone dust will be measured & paid seperately. |
| 20 | All as per item No 19.00 above but except interlocking paver blockNote: Old interlocking paver block shall be re-used. |
| 21 | M&L for 50mm thick Stone dust filling under floors including watering and consolidation complete all as specified and directed. |
| 22 | M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sunken floors complete including demolition existing old PCC work complete all as specified and directed. |
| 23 | M&L for 75 mm thick PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete including demolition existing old PCC work complete all as specified and directed. |
| 24 | M&L for 100 mm thick PCC (1:2:4) type B-2, (using 40mm graded stone aggregate) cement concrete floor surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete including demolition existing old PCC work complete all as specified and directed. |
| 25 | M&L for 40mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring, coping, finish the surfaces even and smooth with using extra cement complete including demolition existing old PCC work complete all as specified and directed. |
| 26 | S&F LDPE pipe of pressure rating 6 kgf/cm^2 in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B-1, using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed. |
| 27 | M&L for cutting holes in brick walls built in cement mortor exc one brick but not exc two bricks at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM (1:3) and making good the dismantled portion in PCC (1:2:4), type B-1, using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed. |
| 28 | M&L for complete waterproofing treatment to sunken floor over RCC slab, including taking down, removing and cleaning the existing damaged/old waterproofing treatment and preparing the surface complete, all as specified and directed, comprising the following:-(a) PCC (1:1.5:3), Type A-0, using 12.5 mm graded stone aggregate, laid to required slope with average thickness of 50 mm, mixed with liquid waterproofing compound (Dr. Fixit Pidiproof LW+ / make as per Particular Specification (list of Make) complete.(b) 15 mm thick rendering in cement mortar 1:3 on vertical surfaces of sunken floor, RCC slab edges, parapet walls, etc., mixed with approved waterproofing compound complete.(c) Applying first coat of Dr. Fixit Fastflex / make as per Particular Specification (list of Make) waterproofing coating) uniformly with stiff nylon brush over the prepared surface and allowing the same to dry for 4 to 6 hours.(d) Applying second coat of Dr. Fixit Fastflex / make as per Particular Specification (list of Make) after drying of the first coat, in a direction perpendicular (90°) to the first coat, and allowing the same to dry for 4 to 6 hours.(e) Applying third coat of Dr. Fixit Fastflex / make as per Particular Specification (list of Make) after drying of the second coat, in a direction perpendicular (90°) to the second coat, complete. |
| 29 | S&F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe)and squatting pan and trap, including connection to trap, and to fushing pipe, antisyphonage pipe, etc complete all as specified and directed. |
| 30 | S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed. |
| 31 | S&F in repairs padestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC(SWR) 'P' Trap including joint run and lead front or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe and including plastic water closet seat cover white closed pattern with flat bottom and cover complete all as specified and directed. |
| 32 | S&F in repairs Vitreous China uninal bowl type coloured, with PTMT urinal spreader for fixing with 15 mm dia pipe, type union for discharge pipe, providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in cement complete all as specified and directed. |
| 33 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed. |
| 34 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 35 | S&F in repairs chromium plated jet for EWC with 1.00mtr SS pipe including necessary GI fitting as required like toir, nipple etc complete all as specified and directed. |
| 36 | S&F in repairs fancy chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified and directed. |
| 37 | Repair to low level flushing cistern by carrying out necessary adjustments to syphon washer, flushing handle/lever, float valve and other internal fittings as required, including dismantling, cleaning, reassembly, minor repairs, testing and commissioning to restore the cistern to proper working condition, complete all as specified and directed by the Engineer-in-Charge. |
| 38 | S&F in repairs CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 39 | S&F in repairs Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed complete all as specified and directed. |
| 40 | S&F in repairs15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed. |
| 41 | S&F in repairs 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed. |
| 42 | S&F in repairs CP fancy type stop valve, cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed. |
| 43 | S&F in repairs chromium plated fancy type stop cock/angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed. |
| 44 | S&F in repairs spindle brass for concealed stop cock 15/20mm bore size complete all as specified and directed. |
| 45 | S&F in repairs CP Brass Fancy type shower rose 15mm dia with 125mm long CP nipple of approved quality complete all as specified and directed. |
| 46 | M&L for glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar (1:4) including dismantiling of old tile set in cement mortar complete all as specified and directed. |
| 47 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & including 15 mm thick screed bed built in CM (1:6) including dismantiling of old tile set in cement mortar complete all as specified and directed. |
| 48 | M&L for vitrified ceramic tiles mat finished light shade 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar (1:6) including dismantiling of old tile set in cement mortar complete all as specified and directed. |
| 49 | All as per above item No 48.00 above but in vertical surface over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 50 | S&F in repairs 15mm dia brass CP for Wall mixer Hot & Hold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 51 | S&F in repairs soap dish chromium plated brass fixed with brass nuts complete all as specified and directed. |
| 52 | S&F in repairs toilet paper holder brass chromium plated complete all as specified and directed. |
| 53 | S&F in repairs towel rail 600mm long, 20mm dia brass chromium plated fixed with wooden guilteis embedded in cement mortar (1:3) with MS screws etc complete all as specified and directed. |
| 54 | S&F in repairs LDPE (Low Density Polyethylene) pipe, 32 mm nominal bore, fixed to walls and/or ceilings, including all necessary bends, elbows, sockets, clamps, supports, jointing materials and accessories, complete all as specified and directed by the Engineer-in-Charge. |
| 55 | S&F in repairs stainless steel gratings round type 150mm size of (Min Weight 100 gms) complete all as specified and directed. |
| 56 | S&F in repairs PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed. |
| 57 | S&F in repairs PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cisterb to EWC complete all as specified and directed. |
| 58 | S&F in repairs brass chromium plated waste coupling 32mm bore for wash hand basin (WHB) complete all as specified and directed. |
| 59 | S&F in repairs brass chromium plated waste coupling 40mm bore for sink complete all as specified and directed. |
| 60 | S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 61 | S&F PVC waste pipe fixed to any type of coupling of n.exc 1.50m length complete all as specified and directed. |
| 62 | S&F in repairs LDPE (Low Density Polyethylene) pipe of pressure rating 6 kgf/cm², 40 mm nominal bore, for waste water connections to sinks, urinals and similar sanitary fixtures, including all necessary fittings, jointing, cutting, threading (where required), fixing in position complete all as specified and directed by the Engineer-in-Charge. |
| 63 | S&F in repairs stainless steel plate rack of overall size 900 mm × 750 mm × 250 mm deep, fabricated from 0.75 mm thick stainless steel sheet,fixed in position to the existing wall or support complete all as specified and directed by the Engineer-in-Charge. |
| 64 | S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen CM dwraf wall and incl fixing cast iron cantiliver bracket connecting union over all size not less than 915MX460mm with bowl size 410X330X160mm complete all as specified and directed by the Engineer-in-Charge. |
| 65 | S&F in repairs rotational moulded polythylene 500 Ltr capacity water storage tank (double layer), (cylindrical/vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed by the Engineer-in-Charge. |
| 66 | S&F in repairs rotational moulded polythylene 1000 Ltr capacity water storage tank (double layer), (cylindrical/vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed by the Engineer-in-Charge. |
| 67 | S&F in repairs rotational moulded polythylene 2000 Ltr capacity water storage tank (double layer), (cylindrical/vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete all as specified and directed by the Engineer-in-Charge. |
| 68 | Cleaning and removing all scale, sludge, dirt, sediment and other deposits from water storage tank of 500 litres capacity, including cleaning of the tank interior, inlet, outlet, overflow and mouth of circulating pipes, complete. |
| 69 | Cleaning and removing all scale, sludge, dirt, sediment and other deposits from water storage tank of 1000 litres capacity, including cleaning of the tank interior, inlet, outlet, overflow and mouth of circulating pipes, complete. |
| 70 | Cleaning and removing all scale, sludge, dirt, sediment and other deposits from water storage tank of 2000 litres capacity, including cleaning of the tank interior, inlet, outlet, overflow and mouth of circulating pipes, complete. |
| 71 | S&F in repairs water storage tank Cover any size of tank capacity complete all as specified and directed. |
| 72 | S&F in repairs gun metal gate valves 20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed. |
| 73 | S&F in repairs gun metal gate valves 25 mm with lever arm screwd both ends for iron pipes complete all as specified and directed. |
| 74 | S&F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. |
| 75 | S&F in repairs framed mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with Chromium Plated brass screw and cup washers complete all as specified and directed. |
| 76 | S&F PVC (SWR) floor trap 75mm dia meter of out let, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 77 | S&F PVC (SWR) multi-floor trap 75mm dia meter of out let, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 78 | S&F in repairs PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed. |
| 79 | S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed. |
| 80 | S&F in repairs 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.. |
| 81 | S&F in repairs 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.. |
| 82 | S&F PVC (SWR) branch piece, single (Single Y) equal or unequal 110mm size complete all as specified and directed. |
| 83 | S&F PVC ( SWR) bends any radius bore of 110 mm complete all as specified and directed. |
| 84 | S&F PVC ( SWR) bends any radius bore of 75 mm complete all as specified and directed. |
| 85 | S&F in repairs stainless steel curtain rod, 25 mm dia, including decorative end brackets, finials, supports, screws, plugs and all other necessary accessories, fixed in position to walls or other approved supports, complete all as specified and directed by the Engineer-in-Charge. |
| 86 | S&F CPVC pipes, 20 mm outer dia, SDR-11, along with plain CPVC SDR-11 fittings, fixed on walls, ceilings or laid in floors, including cutting, chasing, jointing, fixing with suitable clamps/supports, making good disturbed surfaces and testing the pipeline for watertightness, complete all as specified and directed by the Engineer-in-Charge. |
| 87 | S&F CPVC brass elbow (3/4\\" X ½\\") for 20 mm outer dia CPVC pipe complete all as specified and directed. |
| 88 | S&F CPVC brass Tee 20 mm outer dia CPVC pipe complete all as specified and directed. |
| 89 | S&F in repairs 15mm bore GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete including Taking up or down steel tubing & connections complete all as specified and directed. |
| 90 | S&F in repairs 20mm bore GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete including Taking up or down steel tubing & connections complete all as specified and directed. |
| 91 | Taking down door shutter with frame n exc 1.50 Sqm each without taking of shutter from the frame complete all as specified and directed. |
| 92 | S&F factory made steel Window, with side hung shutter including projecting hinges with steel handle, stay complete dovetailed or welded complete all as specified and directed. |
| 93 | S&F factory made steel Window, with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar dovetailed or welded complete all as specified and directed. |
| 94 | S&F steel ventilator fixed type with glazing bar complete all as specified and directed. |
| 95 | S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed. |
| 96 | S&F factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 97 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.50 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 98 | Taking down shutters of any description area not exceeding 1.00 Sqm complete all as specified and directed. |
| 99 | Taking down shutters of any description area exceeding 1.00 Sqm and not exceeding 2.00 Sqm complete all as specified and directed. |
| 100 | S&F 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats complete all as specified and directed. |
| 101 | S&F second class hard wood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 complete all as specified and directed. |
| 102 | S&F pressed steel frames size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 103 | S&F pressed steel frames size 165X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 104 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 105 | S&F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all including hacking out complete all as specified and directed. |
| 106 | S&F plain sheet glass 3mm thick ( up to G+3 storied building) ordinary quality and glazing with oil putty, in squares n.exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed. |
| 107 | S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (including steel sheeting or other covering) also fastening and fixing complete including dismantling of old iron/steel work complete all as specified and directed. |
| 108 | S&F mild steel roof trusses, trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete including dismantling of old iron/steel work complete all as specified and directed. |
| 109 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated (profile pattern) sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete including dismantling of old sheets complete all as specified and directed. |
| 110 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete including dismantling of old sheets complete all as specified and directed. |
| 111 | S&F 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin, anodised and fixed B-22 complete all as specified and directed. |
| 112 | S&F in repairs 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin, anodised and fixed B-22 complete all as specified and directed. |
| 113 | S&F in repairs 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 114 | S&F in repairs 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 115 | S&F 200 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 116 | S&F in repairs 200 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 117 | S&F in repairs 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed. |
| 118 | S&F 150 mm size aluminium anodized handle complete all as specified and directed. |
| 119 | S&F in repairs 150 mm size aluminium anodized handle complete all as specified and directed. |
| 120 | S&F in repairs mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and directed. |
| 121 | S&F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 122 | M&L for preparation of new wooden surfaces of any description exceeding 10 cm in girth or width, including knotting, stopping, rubbing down and cleaning the surfaces, and applying one coat of pink wood primer followed by two coats of synthetic enamel paint of approved shade, complete all as specified and directed by the Engineer-in-Charge. |
| 123 | M&L for preparation of new untreated steel surfaces of any description exceeding 10 cm in width or girth, including cleaning, removing rust, scale, grease and other foreign matter, and applying one coat of red oxide zinc chromate primer followed by two coats of synthetic enamel paint of approved shade, complete all as specified and directed by the Engineer-in-Charge. |
| 124 | S&F in repairs 18/19 mm thick block board, Grade-II quality, interior grade, commercial type, as shelves, partitions and similar components of cupboards, fixed to the existing framework with screws, including providing and fixing 6 mm thick teak wood lipping/edging on all exposed sides, complete all as specified and directed by the Engineer-in-Charge. |
| 125 | S&F in repairs 19mm thick prelaminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board complete all as specified and directed. |
| 126 | S&F 2nd class hard wood plain solid stright chowkhats and frames, wrought framed rebated on the solid, rounded or chemfered, put togather with glue pinned at joints complete all as specified and directed. |
| 127 | S&F continuos ( Piano) hinges mild steel, bright finish or electrogalvanized 30mm width flap ( When open) type complete all as specified and directed. |
| 128 | M&L for welding in repairs not exceeding 25 mm in length to metal sections of thickness exceeding 9 mm but not exceeding 20 mm, including preparation of surfaces, edge cleaning, chipping, grinding, welding with approved electrodes, removal of slag and finishing the welded joint smooth, complete all as specified and directed by the Engineer-in-Charge. |
| 129 | M&L for providing and fixing exposed metal grid false ceiling comprising 8 mm thick calcium silicate ceiling boards manufactured from siliceous and calcareous materials reinforced with cellulose fibres, in 600 mm × 600 mm modules, fixed in anodised aluminium snap grid framework of size 605 mm × 605 mm. The grid system shall consist of main runners, cross tees and perimeter sections complete with suspension arrangement comprising 6 mm dia GI hangers not exceeding 1200 mm in length, duly adjusted to line and level and secured to RCC roof slab/structural members by means of GI ceiling cleats made from 40 mm × 3 mm GI flat, 60 mm long, and expansion holdfast fasteners of 12.5 mm dia and 40 mm long. The work shall include cutting and fitting of boards, providing openings for light fittings, fans, diffusers and other fixtures as required, complete with all accessories, fixtures, fittings and supports, complete all as specified and directed by the Engineer-in-Charge. |
| 130 | M&L for providing and fixing 8 mm thick calcium silicate ceiling boards manufactured from siliceous and calcareous materials reinforced with cellulose fibres, in 600 mm × 600 mm modules fixing in existing grid frame work complete all as specified and directed. |
| 131 | M&L for preparation of old treated steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 132 | M&L for preparation of old treated Wood or Wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
| 133 | M&L for preparation of old treated Wood or Wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
