|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE (A) AHMEDABAD NAME OF WORK : REPAIR/ RE-CARPETING OF CERTAIN STRETCHES OF SUBSIDIARY/ INTERNAL ROADS ADJOINING SHOULDERS, BERMS, KERBS INCL NECESSARY ROAD FURNITURE WITHIN CANTT AT MILITARY STATION JAMNAGAR CONTRACT NO: CWE (A)/JAM/ OF 2026-2027 SERIAL PAGE NO Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SL NO ITEM DESCRIPTION Item Code / Make QTY UNITS Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Repair to potholes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads , paths etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal,watering and well ramming (including supply of road metal) and applying a priming/tack coat @5 Kg per 10 Sqm putting in premixed bituminous macadam well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings.) |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc. 400 sq.m. and depth exceeding 50 mm and n exc 100mm stacking complete as directed. |
| 4 | Material and labour for preparing new scarified of black bituminious macadam top surfaces by brushing with wire brush for removing caked mud, dust etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a priming/tack coat with paving bituminous VG-30 grade @ 7.50 Kg per 10 Sqm all as specifief and directed. |
| 5 | Material and Labour premix bituminious,macadam laid/rolled and compacated to required gradient and camber (consolidated thickness 50 mm or less) to reqd gradient using paving bitumen any penetration of binder content of 4 % (VG-30) by Weight of total mix all as specified and directed |
| 6 | Material and Labour for preparing existing black top surfaces by brushing with wire brush for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a priming / tack coat with paving bituminous VG-30 grade @ 2.5 Kg per 10 Sqm all as specified and directed. |
| 7 | Material and Labour bituminous premix semi dense Asphaltic concrete 40 mm consolidated thickness with 5.5 % (bitumen VG-30) binder content weight of total mix using paving bitumen laid with mechanical paver and any penetration rolled & consolidated to required camber & gradient complete. |
| 8 | Material and labour Moorum/red bajri 100 mm thick (spread thickness) as in road side shoulders, spread rolled and compacted to using power roller exc 8 tonne & n exc 12 tonne complete all as specified and directed. Note: Moorum shall be brought from out side MD land royally if any shall be borne by the contractor. The rate includes for transportation of mooorum irrespective of the distance involved. |
| 9 | Supply and fixing cat eye white/yellow colour of ABS plastic metal with two No of required reflection including fixing with approved adhesive/fastener on road. (series OS-of size 100mmX 100mm X 20mm)complete all as specified and directed on road as in repairs including taking down of existing one. |
| 10 | Preparation of black bituminous road surfaces applying thermoplastic road making reflector special paint, minimum 2.5 mm thick , with machine application and heat mixer, with strring mechanism at temparature 160 degree C laid uniformly with width as directed paint conforming to BS 3262 Part I & II of 1989 etc and 20% glass beads (intermixed) complete as per manufactures instruction all as directed. |
| 11 | Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD land complete all as sp[ecified and directed. |
| 12 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm ) , including making drainage opening wherever required complete including necessary formwork complete all as specified and directed. |
| 13 | Material and labour for preparation of newly plastered or unplastered surfaces including cornices, pilasters etc and applying finishing walls with 2 coats of synthetic enamel paint of any description exc 10 cm in width or girth including priming coat complete all as specified and as directed. |
| 14 | Material and labour for preparation of old plastered or unplastered surfaces including cornices, pilasters etc and applying finishing walls with 1 coats of synthetic enamel paint of any description exc 10 cm in width or girth including priming coat complete all as specified and as directed. |
| 15 | Supply and fixing in repair informatory/ identification Sign board (Double sided) of size 1200 X 1800 mm made out of 3 mm thick ACP (Aluminium composite panel) conforming to IS-376, covered with high intensity grade retro reflective sheeting of green colour as per IRC standard meeting back to back with computer cut letters fixed mechanically on boards fixed with nuts and bolts on single frame made of stainless steel tubular pipe of size 40 mm , ensuring safety. The entire sign board shall be fixed to two vertical posts made of 16 gauge stainless steel pipe, 3m long by riveting/shouldering, complete all as specified and as directed including taking of old unserviceable existing one. |
| 16 | Supply and fixing in repair informatory/ identification Sign board (Double sided) of size 1200 X 1500 mm made out of 3 mm thick ACP (Aluminium composite panel) conforming to IS-376, covered with high intensity grade retro reflective sheeting of green colour as per IRC standard meeting back to back with computer cut letters fixed mechanically on boards fixed with nuts and bolts on single frame made of stainless steel tubular pipe of size 40 mm , ensuring safety. The entire sign board shall be fixed to two vertical posts made of 16 gauge stainless steel pipe, 3m long by riveting/shouldering, complete all as specified and as directed including taking of old unserviceable existing one. |
| 17 | Supply and fixing in repair informatory/ identification Sign board (Double sided) of size 1200 X 1500 mm/ 1200 X 1800 mm made out of 3 mm thick ACP (Aluminium composite panel) conforming to IS-736, covered with high intensity grade retro reflective sheeting of green colour as per IRC standard meeting back to back with computer cut letters fixed mechanically on boards fixed with nuts and bolts on existing frame complete all as specified and as directed. |
| 18 | Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Numbers 65mm dia highly reflective reflectors made out of PMMA and mounted on 45mm/ 50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic polyster elastomer 3 bands of Green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embeding in PCC 1:2:4 (150mm x 150mm x 300mm) type B1 complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
