Tender For Renovation Of Residential Quarters At Pdd Complex Janipur Jammu And Renovation Of Md Office Including Construction Of Bathrooms And Other Allied Works At Janipur Jammu
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2026
1 days left
EMD
60000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Janipur Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Residential Quarters At Pdd Complex Janipur Jammu And Renovation Of Md Office Including Construction Of Bathrooms And Other Allied Works At Janipur Jammu
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Jul-2026 | Extension notice1 | Date | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Renovation of Residential Quarters at PDD Complex Janipur Jammu and Renovation of MD office including construction of bathrooms and other allied works at Janipur Jammu (2Nos staff Quarters) |
| 2 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured |
| 3 | Providing and fixing glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.second class deodar wood |
| 4 | provding and fixing wire gauge shutters using galvanized M.S wire gauge of avg. width for aperture 1.4 mm in both directions for doors, windows, etc with necessary screws as per direction. Second class deodar wood |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, incl. panelling, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately).9.6.1 Second class deodar wood |
| 6 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. including all costs of material and carriage complete. |
| 7 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS :·15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all costs of material and carriage complete. (300x450) |
| 8 | Providing and fixing white viterous china pedastal type water closet european type with seat and lid, 10 ltr low level white vitreous china flushing cistern and cp flush bend with fittings and C.I brackets, 40mm flush bend |
| 9 | Providing and fixing wash wasin wih C.I brackets 15mm dia CP brass single hole basin mixture of approved quality and make |
| 10 | Providing and Fixing Towel Rod |
| 11 | P/F white viterous china pedestal for wash basin complete |
| 12 | Providing and Fixing C.P grating |
| 13 | Providing and fixing Looking Mirrior |
| 14 | Providing and fixing angle valve |
| 15 | Providing and fixing PVC Connection pipes |
| 16 | Providing and Fixing Soap Case |
| 17 | P/F of following size dia PVC pipes complete with fittings etc. standard make . 100mm |
| 18 | Providing and laying GI PIPE including fitting / fixtures of approved brand: 15mm |
| 19 | Repair to plaster of thickness 12mm to 20mm in plaster patches of area 2.5 sqm and under, all complete as per direction of engineer-in-charge. |
| 20 | P/F steel tower bolt |
| 21 | P/Fsteel handles |
| 22 | P/F steel earl |
| 23 | Dismantalling tile work in floors and roofs laid in cement mortar incl. stacking the material within 50 meters lead. |
| 24 | P/F S.S sink |
| 25 | P/F sink mixture |
| 26 | P/F waste pipe |
| 27 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 28 | Providing edge moulding to 18/16mm thick marble stone counter, vanities etc incl machine polishing |
| 29 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. ROOM ceiling |
| 30 | Providing and applying white cement based putty of average thickness 2mm approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats. Doors |
| 32 | Finishing walls with exterior emulsion paint of approved brand and manufacture including primming coat with cement primer (Two or more coats applied) including all carraiges and cost |
| 33 | P/L vitrified floor tiles of 600x600 sizes ( thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement mortor 1:4 including grouting the joints with white cement and matching pigments etc. complete all carraiges and cost of materials |
| 34 | Electrical Works complete job |
| 35 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single cable etc. as required. (Group-A) |
| 36 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm |
| 37 | Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required. |
| 38 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). |
| 39 | Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C\\" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 40 | Two New Bath Rooms |
| 41 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as 10m2 on plan) incl. disposal of excavated earth. All kind of soils |
| 42 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:4:8 (1 cement :4 fine aggregates: 8 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 43 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:2:4 (1 cement :2 fine aggregates: 4 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 44 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) SLAB |
| 45 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:3;6 (1 cement :3fine aggregates: 6 course aggregates nominal size) 20 mm incl .all cost and carraige of materials |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for suspened floors,roofs,landing,etc |
| 47 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 48 | Birck work with common burnt clay selected brickes of class designation 75 in exposed brick work including making horizontal and vertical grooves in cement nortar 1:6 (1 cement : 6 fine sand ) incl curing complete in : Above plinth level |
| 49 | 15 mm cement plaster on rough side of the single or half brick masonry wall of mix 1:6(1 cement : 6 sand)including all carraiges and cost of materials involved. |
| 50 | 6 mm cement plaster to ceiling 1:3 mix ( 1 cement : 3 sand). |
| 51 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. including all costs of material and carriage complete. |
| 52 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS :·15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all costs of material and carriage complete. (300x450) |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 |
| 54 | Providing and applying white cement based putty of average thickness 2mm approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 55 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. |
| 56 | Finishing walls with exterior emulsion paint of approved brand and manufacture including primming coat with cement primer (Two or more coats applied) including all carraiges and cost |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats. Doors |
| 58 | viding and fixing water closet (one piece type ) of standard make one piece |
| 59 | Providing and fixing wash wasin wih C.I brackets 15mm dia CP brass single hole basin mixture of approved quality and make |
| 60 | Providing and Fixing Towel Rod |
| 61 | p/f white viterous china pedestal for wash basin complete |
| 62 | Providing and Fixing C.P grating |
| 63 | Providing and fixing Looking Mirrior |
| 64 | Providing and fixing angle valve |
| 65 | Providing and fixing PVC Connection pipes |
| 66 | Providing and Fixing Soap Case |
| 67 | P/F of following size dia PVC pipes complete with fittings etc. standard make . 100mm |
| 68 | Providing and laying GI PIPE including fitting / fixtures of approved brand: 15mm |
| 69 | P/L vitrified floor tiles of 600x600 sizes ( thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades laid on 20 mm thick cement mortor 1:4 including grouting the joints with white cement and matching pigments etc. complete all carraiges and cost of materials |
| 70 | ELECTRICAL WORK (incl wiring, switches, bulbs, exhaust,etc) complete job |
| 71 | Engaging labour for dismentalling |
| 72 | 1No new Kitchen |
| 73 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as 10m2 on plan) incl. disposal of excavated earth. All kind of soils |
| 74 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:4:8 (1 cement :4 fine aggregates: 8 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 75 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:2:4 (1 cement :2 fine aggregates: 4 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 76 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) SLAB |
| 77 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:3;6 (1 cement :3fine aggregates: 6 course aggregates nominal size) 20 mm incl .all cost and carraige of materials |
| 78 | Centering and shuttering including strutting, propping etc. and removal of form for suspened floors,roofs,landing,etc |
| 79 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 80 | Birck work with common burnt clay selected brickes of class designation 75 in exposed brick work including making horizontal and vertical grooves in cement nortar 1:6 (1 cement : 6 fine sand ) incl curing complete in : Above plinth level |
| 81 | Extra for brick work above plinth level |
| 82 | 15 mm cement plaster on rough side of the single or half brick masonry wall of mix 1:6(1 cement : 6 sand)including all carraiges and cost of materials involved. |
| 83 | 6 mm cement plaster to ceiling 1:3 mix ( 1 cement : 3 sand). |
| 84 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. including all costs of material and carriage complete. |
| 85 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS :·15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all costs of material and carriage complete. (300x450) |
| 86 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 |
| 87 | Providing and applying white cement based putty of average thickness 2mm approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 88 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. |
| 89 | Finishing walls with exterior emulsion paint of approved brand and manufacture including primming coat with cement primer (Two or more coats applied) including all carraiges and cost |
| 90 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats. Doors |
| 91 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes |
| 92 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 93 | Providing edge moulding to 18/16mm thick marble stone counter, vanities etc incl machine polishing |
| 94 | P/F S.S sink |
| 95 | P/F sink mixture |
| 96 | P/F waste pipe |
| 97 | Store into Kitchen :P/F S.S sink |
| 98 | P/F sink mixture |
| 99 | P/F waste pipe |
| 100 | Providing and laying GI PIPE including fitting / fixtures of approved brand: 15mm |
| 101 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels |
| 102 | Providing edge moulding to 18/16mm thick marble stone counter, vanities etc incl machine polishing |
| 103 | New Washroom and Septic Tank at TLMD-I Janipur Jammu |
| 104 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as 10m2 on plan) incl. disposal of excavated earth. All kind of soils |
| 105 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:4:8 (1 cement :4 fine aggregates: 8 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 106 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:2:4 (1 cement :2 fine aggregates: 4 course aggregates nominal size) 20 mm incl .all cost and carraige of materials. |
| 107 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) SLAB |
| 108 | P/l of position cement concrete of specified grade excluding c/o centering and shuttering all work upto plinth level in 1:3;6 (1 cement :3fine aggregates: 6 course aggregates nominal size) 20 mm incl .all cost and carraige of materials |
| 109 | Centering and shuttering including strutting, propping etc. and removal of form for suspened floors,roofs,landing,etc |
| 110 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete |
| 111 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 112 | Birck work with common burnt clay selected brickes of class designation 75 in exposed brick work including making horizontal and vertical grooves in cement nortar 1:6 (1 cement : 6 fine sand ) incl curing complete in : Above plinth level |
| 113 | Extra for brick work above plinth level |
| 114 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 115 | 15 mm cement plaster on rough side of the single or half brick masonry wall of mix 1:6(1 cement : 6 sand)including all carraiges and cost of materials involved. |
| 116 | 6 mm cement plaster to ceiling 1:3 mix ( 1 cement : 3 sand). |
| 117 | Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. including all costs of material and carriage complete. |
| 118 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS :·15622 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all costs of material and carriage complete. (300x450) |
| 119 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 |
| 120 | Providing and applying white cement based putty of average thickness 2mm approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 121 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. |
| 122 | Finishing walls with exterior emulsion paint of approved brand and manufacture including primming coat with cement primer (Two or more coats applied) including all carraiges and cost |
| 123 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.two or more coats. Doors |
| 124 | Providing and fixing white viterous china pedastal type water closet european type with seat and lid, 10 ltr low level white vitreous china flushing cistern and cp flush bend with fittings and C.I brackets, 40mm flush bend |
| 125 | Providing and fixing wash wasin wih C.I brackets 15mm dia CP brass single hole basin mixture of approved quality and make |
| 126 | Providing and Fixing Towel Rod |
| 127 | p/f white viterous china pedestal for wash basin complete |
| 128 | Providing and Fixing C.P grating |
| 129 | Providing and fixing Looking Mirrior |
| 130 | Providing and fixing angle valve |
| 131 | Providing and fixing PVC Connection pipes |
| 132 | Providing and Fixing Soap Case |
| 133 | P/F of following size dia PVC pipes complete with fittings etc. standard make . 100mm |
| 134 | P/F of following size dia PVC pipes complete with fittings etc. standard make 75MM |
| 135 | Providing and laying GI PIPE including fitting / fixtures of approved brand: 15mm |
| 136 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 18.4.1 One urinal basin with 5 literwhite P.V.C automatic flushing cistern. |
| 137 | ELECTRICAL WORK (incl wiring, switches, bulbs, exhaust,etc) complete job including cost of materials |
| 138 | Engaging labour for dismentalling |
| 139 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). |
| 140 | Powder coated minimum thickness 50 micron aluminum tabular handle bar |
| 141 | Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment) |
| 142 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS:12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge |
| 143 | providing and fixing glazing in aluminium door, window, ventilator,etc with EPDM rubber/ neoprene gasket etc complete work |
| 144 | providing and fixing wpc high quality wall panelling Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender