|
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In mud mortar |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing wooden truss and removal of CGI Sheets including soffit and eaves board all complete to be paid as per actual whichever is less, |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil |
| 5 | Providing and Laying Stone Soling including carriage all complete |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Providing and laying in position cement concrete 1:2:4 grade (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of specified grade excluding the cost of centring and shuttering |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 12 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 13 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 14 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. completeFirst class Budloo/Fir wood |
| 15 | Providing Coloured Hirib GS sheet roofing fixed with polymer coated J or L hooks bolts & nuts 8mm dia with bitumen & GI limpet washers upto( a pitch of 60 degree) excld cost of perlins, rafters & tresses 0.50mm thick with zinc coating not less than 275g/sqm |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including all fittings complete. Foreign Wood |
| 17 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Foreign Wood |
| 18 | Providing and fixing 32mm Panelled Door Shutter using 1st class kail wood with carving on both sides as per the approved pattern complete job |
| 19 | Providing and fixing of 3.5 mm thick Coloured Kashmiri glass panes including Beading & necessary nails complete |
| 20 | Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete' 500x500mm |
| 22 | Providing and Laying of Chequered 25 mm Standard made thick tiles including all allied work all as per directions of EIC |
| 23 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete Poplar wood |
| 24 | P/F of 12 mm thick imported kail wooden panelling of approved pattern over and including 12 mm thick plyboard including frame work of budloo wood including finsihing exposed surface with two or more coats touch wood polish including cost of nails, adhesive material etc complete |
| 25 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Pahal Gardan pattern i/c touch wood polishing as per directions of EIC. |
| 26 | Providing wood work in frames of false celing, partitions etc sawn and put up in position Budloo/Fir wood |
| 27 | Providing and fixing of Ornamental Second class Kashmiri local Deodar wooded eaves 300x30 mm nominal size as per approved available pattern & design i/c cost of self driven nails etc complete i/c cost of touch wood with sealer over prepared base / finishing to be approved by EIC . |
| 28 | Providing ridges of hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks bolts & nuts 8mm dia GI limpet & bitumen washers complete 0.63mm thick with zinc coating not less than 275g/sqm |
| 29 | Providing and fixing wooden moulded corner beading of size 40 x 40 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete. Second class kail wood |
| 30 | Providing and applying 2mm thick wall putty on walls to make surface even and smooth . |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 32 | Painting with synthetic enamel paint two or more coats of approved brand & colour including a priming coat & scrubbing the existing deteriorated paint by scrubber & making the surface smooth all complete |
| 33 | Providing and fixing of ornamental type vertical posts of first class Kashmiri deodar wood of approved pattern and design including providing and applying two or more coats of touch wood polishing etc. complete in all respects.size 9\\"x9\\" dia. & 10.0\\" height) including all carriages by mechanical transport uptosite of work complete in all respects |
| 34 | P/F of 12mm thick heavy duty Ornammental hardware items incl cost necessary Lor crews etc of approved make |
| 35 | Tower Bolts 100mm |
| 36 | Handles 125mm |
| 37 | Tower Bolts 200mm |
| 38 | Handles 200mm |
| 39 | Ornamental L Drop |
| 40 | Providing and fixing wooden hand rail of approved size ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved wood primer. Walnut All as per directions of Eic. |
| 41 | Carriage of different materials from different source to site of work |
| 42 | Stone Aggregate and sand from an avg lead of 15 Kms Please Enable Macros to View BoQ information |
