|
| 1 | TOTAL AMOUNT |
| 2 | 20 NB CS PIPE GRADE B WITH FITTINGS |
| 3 | SUPERVISION CHARGES FOR INSTALLATION & COMMISSIONING OF THE VACUUM FEED CHLORINATION SYSTEM, ACCURACY LEVEL +- 4%, MODEL-VF,CAPACITY - 30KG/HR, ALONG WITH THE ABOVE ITEMS AND COMPLETE IN ALL RESPECT AS PER DIRECTION OF EIC. |
| 4 | SUPPLY,DELIVERY, FITTING-FIXING, TESTING ANDCOMMISIONING OF FLEXIBLE COPPER CONNECTOR. MAKE: INDUSTRIAL DEVICES |
| 5 | SUPPLY,DELIVERY, FITTING-FIXING, TESTING AND COMMISIONING 20NB BALL VALVE. MAKE: INDUSTRIAL DEVICES |
| 6 | SUPPLY,DELIVERY, FITTING-FIXING, TESTING AND COMMISIONING OF CHLORINE VALVE FOR INLET AND ISOLATION. MAKE: INDUSTRIAL DEVICES |
| 7 | SUPPLY,DELIVERY, FITTING-FIXING, TESTING AND COMMISIONING OF LEAD GASKET FOR 20 NB FLANGE. MAKE:INDUSTRIAL DEVICES |
| 8 | Labour for jointing and lowering G.I. or E.R.W. M.S. pipes including strainer within the tube well bore vertically with necessary sockets, special fittings and welding as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes, making threads, welding pieces together etc. as necessary as per direction of the Engineer-in-charge. (i) Upto 100 mm dia. pipe |
| 9 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia |
| 10 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm.dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height |
| 11 | STRUCTURAL M.S. BOLT/ NUT/ WASHER (HOT DIPPEDGALVANISED) |
| 12 | Application of two coats of Epoxy primer as per BS 5493 by brush on the cleaned dry concrete surface with epoxy resin primer with reactive suitable hardener mixture as per specification and direction of EIC all complete. [This item will be operated on prior permission from the concerned SE/DyChief Engineer] |
| 13 | Coating of 'Epoxy' Resin of thickness not less than 160 micron with a lowviscosity,crystallization-resistant epoxy resin base with a reactive diluents combined with high build epoxy amine adducts as per BS 5493 standard and a polyamide or amido polyamine or any other suitable hardener. It shall react with epoxy resin at normal ambient temperature, suitable for solvent-free coatings as per recommended proportion for use on metal,concrete and wood surface to protect from corrosion as well as damagefrom chemical reaction after making the surface free from dust, oil and moisture etc. all complete as perinstruction and to the satisfaction of ElC. [This item will be operated on prior permission from the concerned SE/Dy Chief Engineer] Please Enable Macros to View BoQ information |
