|
| 1 | B & R Division Items |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 4 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 5 | Demolition of lime concrete /lean concrete/ brick bats (above ground level) in sunken portion of slab, including removal of rubbish outside MoD land, complete all as specified and directed. |
| 6 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Demolition and breaking up drain pipes 100/110, mm bore (PVC, salt glazed ware, AC or Reinforced concrete) set in cement morter complete all as specified and directed. |
| 9 | Demolition and breaking up drain pipes 150 mm bore (PVC, salt glazed ware, AC or Reinforced concrete) set in cement morter.including PCC Haunching complete all as specified and directed. |
| 10 | Demolition and breaking up drain pipes 200 mm bore (PVC, salt glazed ware, AC or Reinforced concrete) set in cement morter.including PCC Haunching complete all as specified and directed. |
| 11 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 12 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified. |
| 13 | Taking up or down GI tubing and connection 15 mm bore , including cleaning for refixing or removal to store complete all as specified and directed. |
| 14 | M&L for Excavating over area n exc 1.5 m in depth for foundation, etc. and getting out getting out in soft soil all as specified and directed |
| 15 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. |
| 17 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 18 | Material and Labour for Loose filling with broken bricks of gauge 40mm to 80mm in soakage well complete all as specified. |
| 19 | M&L for PCC 1:4:8 type D2 (using 40mm stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed |
| 20 | Material and labour for providing Plain Cement Concrete (1:3:6) type C2 using 40 mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 21 | Material & labour for 75mm thick providing PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection,sub base , leveling of floorings, pavings and similar work as finished over and smooth without using extra cement etc all as specified and directed. |
| 22 | M&L PCC 1:3:6 type C1 (20mm grade stone agg) as in cement concrete in surface channel and drain complete all as specified and directed. |
| 23 | Extra for forming fair finished drains or channels 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 24 | M&L for 100 mm thick PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor finishes, the surface even and fair and similar work complete all as specified and directed. |
| 25 | Material and labour for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork all as specified and directed. |
| 26 | M&L precast RCC 1:2:4 (type B1) using 20 mm graded crushed stone aggregate for manhole cover and set in cement morter 1:4 and similar work complete all as specified and directed. |
| 27 | Material and labour for formwork to soffits of rough finished flat suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (Horizontal or sloping) complete all as specified. |
| 28 | Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide , rough finished surface of concrete complete all as specified and as directed by Engr-in-Charge. |
| 29 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 30 | Use and waste of Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 31 | Use and waste Formwork to sides and soffits of floor or roof beam, beam hunching, girder, lintels, cantilever, shelves including supports, etc for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 32 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 33 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 34 | Material and labour for providing Reinforced Cement Concrete M-25 (Design Mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m complete all as specified and directed. |
| 35 | Materila and labour for providing Reinforced Cement concrete M-25 (Design Mix) Slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specfied and as directed. |
| 36 | Material and labour for Mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 37 | Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 6mm to 8 mm cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 38 | Material and labour for Shingle filling in floors 200mm deep complete all as specified and directed. |
| 39 | M&L for PCC (1:5:10) type E-2 (using 40mm stone aggregate) of depth as required as in sunken floor etc complete all as specified and directed. |
| 40 | Material and labour for providing 40 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregates including integral water proofing compound as per manufacturer's instructions, as in padding in sunken portion of floor slab, coving to junction of floor and vertical walls, including chamfering on edges, finishing the surface fair and even without using extra cement, complete all as specified and directed. Note:- Supply only integral water proofing compound will be measured and paid for separately |
| 41 | M&L 200 micron thick polythene film pasted with the help of adhesives shall be provided over the treatment complete all as specified & as directed. |
| 42 | Water proofing treatment to sunken portion of WCs, bathroom etc. by applying coating of cement slurry mixed with Acrylic based polymer modified cementitious composite compound of make as approved inTechnical instruction 5/ 2003 as detailed hereunder:-(a) Applying 15 mm thick plaster (1:4) in cement sand mortar with integral water proofing compound 2% by weight of cement on floor and wall, finishing the surfaces even and smooth wiithout using extra cement. The surface shall then be cured and allowed to dry.(b) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hrs.(c) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours |
| 43 | M&L Brickwork with sub-class `B' bricks in one brick thick honeycomb walling built in cement mortar 1:4 complete all as specified . |
| 44 | M & L Brickwork with subclass' B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc complete all as specified and directed. |
| 45 | M & L Brickwork with subclass' B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc complete except bricks all as specified and directed.Note : Old brick shall be used in this item which obtained from respective demolish items. |
| 46 | Material and labour Brickwork with subclass 'B' Bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and directed. |
| 47 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with integral water proofing compound 3%@ weight of cement to be finished even and fair without using extra cement complete all as specified and directed.Note : WPC will be measured and paid seperately under respective item |
| 48 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to be finished even and fair without using extra cement complete all as specified and directed. |
| 49 | Material and labour for 10 mm thick rendering in cement mortar 1:6 on other than fair faces of brick wall or concrete surfaces, finished the surfaces even and fair complete all as specified. |
| 50 | Supply only integral liquid water proofing compound all as specified |
| 51 | Material and labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes all as directed. |
| 52 | M & L for Glazed ceramic tiles in vertical surface 350x250x7mm /450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile etc, completed all as specified & directed. |
| 53 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 54 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 55 | Supply and fix 100 mm size stainless steel butt hinges medium weight cold rolled fixed with steel screws complete all as specified & directed. |
| 56 | Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 57 | Supply and fix 125 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 58 | S &F Vitreous China urinals, bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 59 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , bolts and flushing pipe but including seat cover, jet pressure with hinges device complete all as specified and directed. |
| 60 | Supply & Fixed in repairs Vitreous china wash down water closet pan Aquiline Rimless single piece WC with UF Seat Cover complete all as specified and as directed. |
| 61 | S&F in repair Vitreous china squatting pan, Orissa pattern, size 580x440 mm white with integral foot rest (excluding flushing cistern and flushpipe ) including provision of cement concrete bedding all as specified and directed. |
| 62 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 63 | S&F 10 litre capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including bracketsall as specified and directed. |
| 64 | Supply and fix in repairs , vitreous china 'P' or 'S' trap for squatting pan all as specified and directed. |
| 65 | Supply and fix in repair 15 mm bore Bib taps brass chromium plated fancy type screwed down for iron pipe or for brass ferrule complete all as specified. |
| 66 | Supply and fix in repair 15 mm bore stop valve/ angle valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 67 | S & F in repairs Chromium plated shower roses with or without swivel joints of any colour for fixing with 15mm pipe with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of CP brass any colour complete all as specifed and directedMake : Parryware Cat Part No. T9809A1 or equivalent |
| 68 | Supply and fix as in repair 15 mm bore bib taps, PTMT of any colour , screwed down, screwed for iron pipe or for brass ferrule (Min wt-90 gms) etc complete all as specifed and directed. |
| 69 | S & F in repair PVC connections 15mm dia size with PTMT nuts of length 450mm complete all as specified and directed. |
| 70 | Supply and fixing 25 mm dia spout pipe complete all as specified and directed. |
| 71 | Supply and fixing grating doom PTMT 125 mm dia with waste holes (minimum weight 40 grams) , fixed as in repairs, complete all as specified and directed. |
| 72 | Supply and fixing grating doom PTMT 100mm dia with waste holes (minimum weight 25 grams) , fixed as in repairs, complete all as specified and directed. |
| 73 | M&L PCC 1:3:6 type C2 , using 40 mm graded crushed stone aggregate as in PCC bed to drain pipes 110 mmm dia including packing under and hunching against the sides of pipes after the pipes are laid and tested complete al as specified and as directed . |
| 74 | M&L PCC 1:3:6 type C2 , using 40 mm graded crushed stone aggregate as in PCC bed to drain pipes 150 mm dia including packing under and hauncing against the sides of pipes after the pipes are laid and tested complete al as specified and as directed . |
| 75 | S & F PVC (SWR) pipes 150mm dia single socketed in any length with rubber ring joints laid in trenches complete all as specified. |
| 76 | S & F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches complete all as specified. |
| 77 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches complete all as specified. |
| 78 | S & F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed wall complete all as specified. |
| 79 | M & L for PVC (SWR) pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed |
| 80 | S & F PVC (SWR) bends 110mm dia of any radius complete all as specified and directed. |
| 81 | S & F PVC (SWR) bends 75mm dia of any radius complete all as specified and directed. |
| 82 | S & F PVC vent cowl 110mm dia complete all as specified and directed. |
| 83 | S & F PVC vent cowl 75mm dia complete all as specified and directed. |
| 84 | S&F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 85 | S & F PVC (SWR) junction single T equal or unequal 110mm complete all as specified and directed. |
| 86 | S&F in repairs PVC (SWR) reducers 75-110mm equal or unequal complete all as specified and as directed |
| 87 | S&F 100 mm ID Double Wall Corrugated HDPE pipes (Class SN4) for sewerage line etc laid in trenches and jointed with all fittings, complete all as specified and as directed |
| 88 | S&F 150 mm ID Double Wall Corrugated HDPE pipes (Class SN 4) for sewerage line etc laid in trenches and jointed with all fittings, complete all as specified and as directed |
| 89 | S&F 200 mm ID Double Wall Corrugated HDPE pipes (Class SN 4) for sewerage line etc laid in trenches and jointed with all fittings, complete all as specified and as directed |
| 90 | S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed. |
| 91 | Material and labour for preparation of new or previously untreated wall surfaces and applying three coats of white wash complete all as specified and directed. |
| 92 | Material & Labour for preparation of new or previously untreated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 93 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing, etc., and making good, cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and as directed |
| 94 | Cleaning/desludging completely of solid / liquid sludge by pumping mechanically from inside the soakage well and others and disposal of sludge in pit made for this purpose by sludge remover tanker truck as directed by Engr- In- Charge including spreading bleaching powder inside and surrounding pit complete all as specified. |
| 95 | Cleaning of PVC pipe , SGSW drain pipe , RCC Hume pipe , cast iron pipe of any dia by Roding with sectional sewer rod / flexible sewer rod / bucket etc. thoroughly from inspection chamber to manhole or from one manhole to another manhole of any depth and size and well flushing with water after cleaning and including removal of sludge and other materials obtained from cleaning the drain pipe to a pit made for this purpose and filling up to the earth complete all as specified and as directed . |
| 96 | M&L for cleaning / de-sludging of manholes, using mechanical pumps, diesel driven, with fuel, operator, etc. and all necessary tools / plants including loading and carting off the drawn sludge, waste material, scum, spoil water, etc. in pit made for this purpose through designated sludge carriers / bio tanks complete all as specified and as directed |
| 97 | M&L for cleaning of WC and inspection chamber by using rubber pump and rod including removal of sludge and other foreign materials complete all as specified and as directed |
| 98 | M&L for cleaning of kitchen / bathroom trap (floor trap/ gully trap) by using rubber pump and rod including removal of sludge and other foreign materials complete all as specified and as directed |
| 99 | M&L Cleaning/desludging of septic tanks using mechanical pumps,diesel driven,with fuel, operator etc and all necessary tools/plants including loading and carting off drawn sludge ,waste material,scum,spoil water etc through designated sludge carriers/bio tanks complete all as specified & as directed of the capabilities For 10 users |
| 100 | M&L Cleaning/desludging of septic tanks using mechanical pumps,diesel driven,with fuel, operator etc and all necessary tools/plants including loading and carting off drawn sludge ,waste material,scum,spoil water etc through designated sludge carriers/bio tanks complete all as specified & as directed of the capabilities For 25 users |
| 101 | M&L Cleaning/desludging of septic tanks using mechanical pumps,diesel driven,with fuel, operator etc and all necessary tools/plants including loading and carting off drawn sludge ,waste material,scum,spoil water etc through designated sludge carriers/bio tanks complete all as specified & as directed of the capabilities For 50 users |
| 102 | M&L Cleaning/desludging of septic tanks using mechanical pumps,diesel driven,with fuel, operator etc and all necessary tools/plants including loading and carting off drawn sludge ,waste material,scum,spoil water etc through designated sludge carriers/bio tanks complete all as specified & as directed of the capabilities For 100 users Please Enable Macros to View BoQ information |
