|
| 1 | Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge. |
| 2 | Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed. |
| 3 | Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed. |
| 4 | M&L for sand cushioning to U/G cable in layers in trenches complete all as specified and directed. Note :- Only Puned layers shall be measured for payment |
| 5 | Supply and laying reinforced precast concrete cable cover class LV type 1 flaat size 250mmx150mmx40mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge. |
| 6 | Dismantling / Taking out Unserviceable LT cables of size 50 sqmm to 120 sqmm from any position i.e ground / walls / poles / culverts etc complete with protection pipe all as specified and directed by Engineer-in-Charge. |
| 7 | Supply and Laying cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 core complete all as specified and directed. Make : MESCAB/HAVELLS/POLYCAB/KEI/GLOSTER or equivalent as approved by GE. |
| 8 | Supply and Laying cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core complete all as specified and directed. Make : MESCAB/HAVELLS/POLYCAB/KEI/GLOSTER or equivalent as approved by GE. |
| 9 | Dismantling / Taking out Unserviceable LT cables of size upto 35 sqmm any core from any position i.e ground / walls / poles / culverts etc complete with protection pipe all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and Laying cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 core complete all as specified and directed. Make : MESCAB/HAVELLS/POLYCAB/KEI/GLOSTER or equivalent as approved by GE. |
| 11 | Supply and Laying cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core complete all as specified and directed. Make : MESCAB/HAVELLS/POLYCAB/KEI/GLOSTER or equivalent as approved by GE. |
| 12 | Supply and Laying cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core complete all as specified and directed. Make : MESCAB/HAVELLS/POLYCAB/KEI/GLOSTER or equivalent as approved by GE. |
| 13 | M & L GI tube light grade 40mm bore for passing through cables under the floor, along the wall or along the pole and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc., including taking down old unserviceable GI tubing complete all as specified. |
| 14 | M & L GI tube light grade 25mm bore for passing through cables under the floor, along the wall or along the pole and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc., including taking down old unserviceable GI tubing complete all as specified. |
| 15 | Dismantiling/taking out old unserviceable LT insulator any size, any type from poles complete all as specified. |
| 16 | S & F for pin type insulator porcelain vitreous white/ brown or green including one galvanised mild steel spindle two GI washer and one GI nut 100mm height, 65mm dia for 1100 Volt grade complete all as specified and directed. |
| 17 | S & F for Sackle type insulator porcelain vitreous white/ brown or green including one galvanised mild steel straps of size 31 x 5 mm, washers insulator bolt of 14 mm dia and nuts complete of size 100 mm hight and 115mm dia of working pressure 1100 volts grade complete all as specified and directed. |
| 18 | S&F in repair cable route marker of size 100 mm x 100 mm x 5mm thick with GI plate with inspection threon bolted / welded to 35 mm x 35mm x6 mm angle iron 60 cm long and fixing the same in ground as required for LT cable all as specified and directed by Engineer-in-charge. |
| 19 | S&F in repairs Busbar Chambers 8 way 100 Amps outdoor type (IP 65/66) pole mounted including provision of fixing on pole by means of suitable size of clamps with nut and bolts OR provision of fixing on 50 x 50 x 6mm thick angle iron frame work upto height of 0.9mtr above ground level including necessary connection completed all as specified and as directed. Make Havells cat part No IHBC010004 or equivalent make of SMC/Hensel. |
| 20 | S&F Busbar Chambers 4 way 100 Amps outdoor type (IP 65/66) pole mounted including provision of fixing on pole by means of suitable size of clamps with nut and bolts including necessary connection including taking down of old u/s bus bar completed all as specified and as directed. Make Havells cat part No IHBC010004 or equivalent make of SMC/Hensel |
| 21 | Trimming of tree branches which touches the LT OH lines and 2.5 Mtr away from centre line of LT OH lines span not exceeding 60 Mtr distance between poles by using neccessory T&P items and depositing the tree branches/leaves at 30 Mtrs away from the site. Note -Any number of tree branches cut in one span will be measured as one lenght of payment. |
| 22 | M & L for Plain Cement Concrete (1:3:6) mix type C2 (using 40 mm graded stone aggregate) in foundation, filling and mass-concrete etc for pole, stay etc all as specified and directed by Engr-incharge. |
| 23 | M & L for Plain Cement Concrete (1:2:4) type B1 (using 20 mm graded stone aggregae) as in copping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge. |
| 24 | Supply and fixing of earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried on ground or drawn in conduit pipe or fixed to poles in repairs or any other indicated situation for the loop earthing etc. as required of size 32 x 6 mm galvanized iron strip complete all as directed. |
| 25 | Dismantiling and taking down unserviceable ACSR having more than two joints of any size and removing from site of work all as directed by Engr-in-charge. |
| 26 | M&L for aluminium conductor steel reinforced ( ACSR ) including binding wires of suitable sizes and suitable conductors / parallel groove clamp Etc. other jointing materials for over head lines complete all as specified and directed by Engineer-in charge. |
| 27 | M&L earthing complete with galvanized steel earth plate electrode 600mmX600mmX6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and connected to and including using 32 x 6 mm galvanized MS strip wire upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES schedule Part-I, and testing on completion including necessary excavation and earth work in any type of soil, PCC(1:3:6) type C1 chamber, pre-cast RCC slab 50mm thick in cement concrete (1:2:4), type B1, reinforced with welded steel wire fabric or XPM, (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe 40 mm dia, light grade 7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. Note : (a) Length of earthig connection incl GI strip and protection pipe more than 7.5 Mtr will be measured separately. (b) Contractor should conduct necessary test such as Earth continuity, earth resistance test in presence of JE (E/M)/Engr-incharge. |
| 28 | All as per item No. 28.00 above but with GI conductor 4 mm dia as earth electrode and 15mm dia protection pipe complete all as specified and directed. |
| 29 | Dismantling / Taking down of cross arms of channel or sections etc complete setting aside for reuse (serviceable one) or removing from site of work all as directed and as specified.. |
| 30 | M & L cross arms, bracings, supports clamps, stay clamps etc fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts any size of shape and including hooks & clamps for aerial bunch cable as indicated and directed and inclusive of 2 coats of aluminium painting over a coat of red oxide primer all as specified and as directed. |
| 31 | Dismantling / Taking down old unsv stay assembly complete all as specified and as directed by engineer in charge. |
| 32 | M & L stay assembly with accessories as shown in Elect plate No- 01 of MES schedule Part-I complete with diameter of rod 16 mm . Note - Loop type insulator , stay clamps , excavation and concrete will be measured and paid separately. |
| 33 | Supply & Fixing in replacement loop type insulator vitreous porcelain white, brown, or green of size 65 X 90 mm clearance of hole 16 mm complete all as specified and directed. |
| 34 | M&L for painting of steel tubular pole of any size , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ) complete all as directed. |
| 35 | Restringing of existing LT overhead line including removing the existing binding wire and rebinding with new binding wire after tightning of overhead lines including disconnecting existing jumpher and connections and reconnecting after tightning of conductor incl replacement of all jumpers all as directed by Engr -incharge.Note - (a) Any run of conductor in between two span in LT lines shall be measured as one lenght for payment purpose. (b) ACSR conductor will be measured and paid separately. |
| 36 | M&L for Repairing of LT panel by means of replace the hinge and locking arrangement of the existing panel, tightening the cable with bus bar by means of suitable lugs, replacement of suitable indicator with colour all as specified and as directed by Engr-in-charge. |
| 37 | S & F in repairs MCCB 4 pole 250 Amps, with thermal release range 70-100% and magnetic setting adjustable, breaking capacity 36 KA completed all as specified and as directed by Engr-in-charge |
| 38 | S & F in repairs MCCB 4 pole 200 Amps, with thermal release range 70-100% and magnetic setting adjustable, breaking capacity 36 KA completed all as specified and as directed by Engr-in-charge. |
| 39 | S & F in repairs MCCB 4 pole 160 Amps, with thermal release range 70-100% and magnetic setting adjustable, breaking capacity 36 KA completed all as specified and as directed by Engr-in-charge. |
| 40 | S & F in replacement of existing type MCCBs of 100 Amps, 415Volt, breaking capacity 25KA, 4 Pole, completed all as specified and as directed by Engr-in-charge. Make : Legrand / L&T / Schneider |
| 41 | Material and labour for spray painting to outdoor/Indoor type double door LT panels/Fedder pillar box incl angle iron stand with synthetic enamel paint after cleaning the surface thouroughly with scrapper including protecting/cleaning of cables, wiring and other non painted parts complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix cable jointing kit in repairs of existing LT 1.1 KV grade cable disconnecting from site (by means of disconnecting from panel/trench by excavation) for outdoor termination Straight through tubular sleeve version type joint complete with jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 120 Sqmm complete all as spcified and directed. |
| 43 | Supply and fix cable jointing kit in repairs of existing LT 1.1 KV grade cable disconnecting from site (by means of disconnecting from panel/trench by excavation) for outdoor termination Straight through tubular sleeve version type joint complete with jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 50 Sqmm complete all as spcified and directed. |
| 44 | M & L Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size, including taking out old unserviceable rusted out danger plate complete all as specified and directed. |
| 45 | M & L for DK Thermoplastic cable junction boxes in repairs of make Sintex, product code GSJB-3126, IP 65 of size 270x225x135mm of metric knockouts for cable entry, weather proof for indoor/outdoor installation with and including glands/insulators and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to wall/Steel Poles by means of suitable size of clamps with nut and bolts complete including taking down existing existing junction box all as specified and directed by Engineer-in-Charge. NOTE: Make of Junction box shall be Sintex/Hensel or equivalent as approved by GE |
| 46 | Supplied and spreding graded coarse aggregae 40 mm nominal size all around the structure yard area all as directed by Engrs-in charge. |
| 47 | Taking out old unserviceable / faulty cable of any size /serviceable connecting cable of any size/grade cross sectional area up to 10 sqmm to 50 sqmm 3.5 core including brick protection for repairs/replacement etc and removing materials from site of work complete all as specifed and as directed. Note :- (a) Relaying of cable after rectifying the fault, earth work shall be measured and paid separately under respective items(b) Serviceable bricks/pipe retireved shall be stacked separately for reuse and cost of the same is inclusive in the item rate.(c) Excavation and necessary earthwork shall ve measured and paid separtely under relevent item. |
| 48 | All as per item No. 47 here in above but 70 sqmm to 120 sqmm 3.5 core or 4 Core LT UG cable complete all as specified and directed. Note :- (a) Relaying of cable after rectifying the fault, earth work shall be measured and paid separately under respective items(b) Serviceable bricks/pipe retireved shall be stacked separately for reuse and cost of the same is inclusive in the item rate.(c) Excavation and necessary earthwork shall ve measured and paid separtely under relevent item. |
| 49 | Supply only Aluminium lugs of any type of 16 sq.mm size complete all as specified and directed. |
| 50 | Supply only Aluminium lugs of any type of 25 sq.mm size complete all as specified and directed. |
| 51 | Supply only Aluminium lugs of any type of 35 sq.mm size complete all as specified and directed. |
| 52 | Supply only Aluminium lugs of any type of 50 sq.mm size complete all as specified and directed. |
| 53 | Supply only Aluminium lugs of any type of 70 sq.mm size complete all as specified and directed. |
| 54 | Supply only Aluminium lugs of any type of 95 sq.mm size complete all as specified and directed. |
| 55 | Supply only Aluminium lugs of any type of 120 sq.mm size complete all as specified and directed. |
| 56 | M&L for Synthetic insulating rubber mat of size 2 m x 1m x 12 mm with ISI mark suitable for 1.1 KV rating in red colour complete all as specified and directed. Please Enable Macros to View BoQ information |
| 57 | M&L for Synthetic insulating rubber mat of size 2 m x 1m x 12 mm with ISI mark suitable for 1.1 KV rating in red colour complete all as specified and directed. Please Enable Macros to View BoQ information |
