|
| 1 | Excavating for foundation or in trenches not exc 1.5m in depth and getting out in any soil/strata complete all as specified and directed. |
| 2 | Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick all as specified and directed by Engineer-in-Charge. |
| 3 | Removal of surplus soil/excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 4 | M&L Cement concrete type C2, 1:3:6 (40mm graded aggregates) PCC in mass concrete or in similar work complete all as spd and directed. |
| 5 | M & L cement concrete 1:1.5:3 (using 12.5 mm graded stone aggregate) as in footing, beams, bases for columns and mass concrete where required complete all as specified and directed. |
| 6 | M&L Reinforced cement concrete 1:1.5:3 (using 12.5 mm graded stone aggregate) in Columns , pillars ,Piers ,Posts and struts complete all as specified and directed |
| 7 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 8 | All as per item No 07.00 above but 6 to 8 mm dia in stirrups, spacers and binders all as specified and directed. |
| 9 | M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, roof beam, lintel beam etc; and similar work; vertical or to batter with rough finished surface |
| 10 | M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular in plan to provide rough finish surface to concrete |
| 11 | M&L for Brick work with Fly ash brick straight or curved on plan exc 6 m mean radius, buit in cm 1:6 as specified and directed |
| 12 | M&L 15 mm thick rendering, in two layers (10+5mm) first layer in Cement mortar 1:6 and second layer with cement mortar 1:4 using WPC as per manufacturers instructions on fair faces of brick work or concrete surfaces finished smooth and even without using extra cement . |
| 13 | M&L 5 mm thick rendering in CM 1:3 over RCC member like column/ beams etc surfaces finished even and smooth w/o using extra cement all as specified and as directed by engr in charge. |
| 14 | M & L Preparation of plastered surface wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and as directed by engr in charge |
| 15 | Supply only integral water proofing compound of approved make complete all as specified and as directed by engr in charge |
| 16 | Supply and fixing of SFRC jalli size 600x450x40mm, jointing with CM 1:4 and finish the surface smooth and of approved shape, design and pattern over the wall of required height complete all shall be directed by GE. Make - Mehtab tiles Indore or equivalent. |
| 17 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all speciified and directed. |
| 18 | Moorum/red bajri filling under floors or pavings including watering ramming and consolidation in layers n exc 15cm complete all as directed |
| 19 | Demolition/Dismantling of brick work , or any type built in Cement mortar including all quoins, arches, pillars etc Please Enable Macros to View BoQ information |
