|
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.UADD sor no. 20.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 4 | in all types of rocks. |
| 5 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.2/254 |
| 6 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 7 | in all types of rocks. |
| 8 | Drilling of perfectly vertical bore hole of 115 mm diameter up to desired depth below ground level in all types of rocks including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.3 |
| 9 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments)20.26/259 |
| 10 | CM casing pipes 125mm dia |
| 11 | CM casing pipes 150mm dia |
| 12 | Providing and fixing of well cap on top of the tube well for protection150mm dia20.9/256 |
| 13 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked requiredcapacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\\"/6\\" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby & any ISI standard make)2 HP Head Mt. 163-58 Discharge LPM 10-45MPPHD SOR I Sep. 2023 11.2/164 |
| 14 | Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor11.6/165 |
| 15 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed)32 mm diaUADD SOR Vol-17.1/103 |
| 16 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm.32mm dia6.8/90 |
| 17 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)32mm dia6.27/95 |
| 18 | Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete.UADD Sor 6.1/88 |
| 19 | 15 mm dia |
| 20 | 32mm dia |
| 21 | Providing and fixing full way gate valves tested to 21.00 kg/sq.cmUADD Sor 6.4/89 |
| 22 | 15 mm dia |
| 23 | 32mm dia |
| 24 | Providing & fixing water taps15mm diaUADD Sor 6.1/92 |
| 25 | Dismantling of cement concrete pavement i/c breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead upto 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200.100*0.076*0.076= 0.56 CumUADD Sor 18.12/229 |
| 26 | Providing and laying in position Plain cement concrete (PCC) of specified grade excluding the cost of centering and shuttering18.14/229Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregateUADD Sor 18.14.3 Please Enable Macros to View BoQ information |
