|
| 1 | (A) Standby Gas Chlorination system |
| 2 | Wallace & Tiernan (Evaqua ) make Vaccum operated Gas Chlorinator , Manual cap -4 kg/hour . |
| 3 | Wall/ Toner mounted Vacum regulator , manual type -1no cap -10kg/hour |
| 4 | Wall mounted scale controller / Rotameter Glass tube cap 4 kg/ hour , Manual control |
| 5 | 3/4'' Injector , Cap -4Kh/Hr |
| 6 | PVC Connector |
| 7 | PTFE Vaccume Tube |
| 8 | Header Line Auxillary Valve |
| 9 | Copper tube 1.50 mtr length |
| 10 | Lead washer for Tonner |
| 11 | (B) Safety equipment system |
| 12 | Supplying fitting and fixing of BA SET FOR SAFE HANDLING OF Gas Chlorination system |
| 13 | Savior chlorine control kit is compact arrangement for mounting on 900 kgs chlorine tonners developing leaks due to any reason . It is made up of strong is 226 powder coated steel material which is to make it corrsion resistant and it fitted with side mounted anntifrication device and clamps . the whole unit after mounting is held together with a strong chain which goes aronund the tonner it cosists of a control sliding hood with tee arangement for mounting on any type of valve , A butyl rubber gasket is attached to the hood which comes with a side mounted chlorine valve which can be diverted for release of the leaked gas either to a rubber or to a strong tank, The kit is supplied in metal box both with partition for storage and protection after use. |
| 14 | Savior BA Set are open circuit positive pressure breathing apparatus set with composite back plate , strong nylon harness, warming whistle and rubber shrouded pressure gauge and face piece demand valve ( Cylinder 6.8 litres/300 bar composite Cylinder , |
| 15 | Safety hand Gloves |
| 16 | Safety Guggles |
| 17 | Safety Chemical suit |
| 18 | Water Resistant wind indicator |
| 19 | Wind indicator stand |
| 20 | Rectoreflective Tap - 50 mm |
| 21 | 3m multi gas face mask with ctrige (Twin 6003) |
| 22 | Carrying case for BA Set |
| 23 | Safety CS Foot operated Eye and Face shower |
| 24 | (C) Chlorine Toner with Liquid Chlorine - 1) |
| 25 | Supplying fitting and fixing of empty chlorine tonner with liquid chlorine to be used in disinfection for supplying of drinking water |
| 26 | Cost of Empty Chlorine Tonner (New) with filling permission licence |
| 27 | Liquid Chlorine filled tonner (0.90MT)/tonner for 3 nos |
| 28 | Freight charges of Toner |
| 29 | (D) Chlorine Toner with Liquid Chlorine - 2) |
| 30 | Supplying fitting and fixing of Gas Header line complete with PRV and Gas filter of 3/4 cast steel flange fitted with header isolation valve and connecting Yoke |
| 31 | Trunion roller support (stand ) for tonner |
| 32 | 4m3 at 40 MWC - 3 phase motor mono block multi- stage booster pump mounted on a common base frame . |
| 33 | DOL starter for busster pump |
| 34 | Chlorine Gastion device with seansor and alarming system |
| 35 | Piping arrangement for booster pump for chlorine dosing solution with suction line including 40-50 mm dia ball valve , Y type stener ,PP-NRV , Pressure gauge etc complete |
| 36 | Fright charges of Tonner Please Enable Macros to View BoQ information |
