|
| 1 | Carriage of the following material from Store Centre, Rampur to work site including loading & unloading. |
| 2 | STP Pole 13 Mtr |
| 3 | ACSR Dog Conductor |
| 4 | 33 KV Pin insulator with Pin |
| 5 | Disc Insulator with fitting |
| 6 | Earthing |
| 7 | 33 KV Stay set Complete |
| 8 | 33 KV X-Arm |
| 9 | Top channel |
| 10 | Dropper channel |
| 11 | MS Angle Iron |
| 12 | STP Pole(Recived Back Site to Store) |
| 13 | ACSR Dog condutor(Recived Back Site to Store) |
| 14 | MS Steel(Recived Back Site to Store) |
| 15 | a) Single/Double support structure as required (rate given by for single pole )Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms. |
| 16 | 13 MTR Long STP |
| 17 | Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc.Single/Double support structure(rate given by for single pole ) |
| 18 | 13 MTR Long STP |
| 19 | Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc. |
| 20 | Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps. |
| 21 | Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs. |
| 22 | Fixing, tightening and nozelling of 33 KV Pin insulator with pin and nut as required tension as per direction of supervising Engineer |
| 23 | Fixing, tightening and nozelling of 33 KV Disc insulator with fitting as required tension as per direction of supervising Engineer |
| 24 | laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer. |
| 25 | Providing and Painting of Aluminium paint as per RESPO Norms and as per direction of Supervising Engineer |
| 26 | Providing and Painting of Red Oxide paint as per RESPO Norms and as per direction of Supervising Engineer |
| 27 | Providing and fixing of earth wire clamp with bolt and nut as per RESPO Norms and as per direction of Supervising Engineer |
| 28 | Providing and fixing Bolt unt and washer All size(LS) as RESPO Norms and as per direction of Supervising Engineer |
| 29 | Providing and fixing of Barbed wire GI per RESPO Norms and as per direction of Supervising Engineer |
| 30 | Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer |
| 31 | Providing and fixing Danger board as RESPO Norms and as per direction of Supervising Engineer |
| 32 | Providing and fixing Number plate as RESPO Norms and as per direction of Supervising Engineer |
| 33 | Providing and laying/fixing of Clamp for 33 KV V Type X-Arm and F Bracket RESPO Norms and as per direction of Supervising Engineer |
| 34 | Dismentaling of old and used MS Steel Scrap as RESPO Norms and as per direction of Supervising Engineer |
| 35 | Dismentaling of old and used STP Pole as RESPO Norms and as per direction of Supervising Engineer |
| 36 | Dismentaling of old and used Dog conductor as RESPO Norms and as per direction of Supervising Engineer Please Enable Macros to View BoQ information |
