Recarpeting of approach Road Parking Area at Government Civil Hospital Sector 22 Chandigarh
Date
13-07-2026
2
22-06-2026
Recarpeting of approach Road Parking Area at Government Civil Hospital Sector 22 Chandigarh
Date
29-06-2026
3
22-06-2026
Recarpeting of approach Road Parking Area at Government Civil Hospital Sector 22 Chandigarh
Date
29-06-2026
Name of Work:- REARPATING OF APPROACH ROAD ,PARKING AREA,AT GOVERNMENT CIVIL HOSPITAL SEC 22, CHANDIGARH.
Sl. No.
Item Description
1
Providing and laying tack coat with bitumen VG-10@ 3.00 kg/10 sqm using sprayer pump on prepared surface heatingbitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORTH&H specification and to the entire satification of the Enginer-in-side.
2
Providing and laying 30mm thick bituminous concrete as per clause 507 of MORT&H specification with mechanical paver after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum 5.4% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500.17 gradation –2 of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge.
3
Providing and fixing of Raised Pavement markers (Cat eyes) of make 3m series / Avery Denninson 80 / C-80 confirming to ASTM D4280 type H with micro prismatic lens on both sides with 13 sq cm retro-reflective surface area in each lens, having two no. 3cm shanks and fixing the same with suitable epoxy after cutting the road surface for embedding shanks complete in all respects and to the entire satisfaction of the Engineer in charge
4
Providing and applying 2.5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, arrows and other road signs etc. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete in all respects and to the entire satisfaction of Engineer-in-charge.
5
Dense Graded Bituminous Macadam: Providing and laying 50mm thick dense graded bituminous macadam with mechanical paver after mixing aggregate and bitumen as per design mix in hot mix plant using minimum @ 4.5% bitumen of grade VG-30 of total mix with aggregate confirming to requirement laid in table 500.8 and as per grading II specified in table 500.10 complete as per clause no. 507 of MORT&H specification rolling with smooth wheeled vibratory and tandem roller as per clause 501.6 and 501.7 to achieve the desired density 2.3gm/cc. complete in all respect and to the entire satisfaction of the Engineer-in-charge.
6
Dismantling of existing Kerbs and stacking the serviceable kerbs properly at site and disposal of the unserviceable kerbs and channels average lead of 1000 mtr
7
providing and fixing of factory manufactured precast concrete kerb of size 300mm x 300mm having 150mm thickness with one edge semi rounded duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge.
8
Dismantling of existing Channels and stacking the serviceable channels properly at site and disposal of the unserviceable kerbs and channels average lead of 1000 mtr.
9
NEW CHANNELS : Analysis of rate for providing and fixing of factory manufactured precast concrete channel of size 300mm x 300mm having 75mm thickness duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge.
10
Refixing of dismantled PCC Channel with cement mortar 1:2 complete n all respects and to the entire satisfaction of the Engineer in Charge.
11
Refixing of dismantled PCC kerbs with cement mortar 1:2 complete n all respects and to the entire satisfaction of the Engineer in Charge. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
