|
| 1 | SITC Of 9000mm Pelican Orna Eva Florian pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick with 2450mm Height & Top section 114.3mm Dia x 3.2mm thick with 4304mm Height. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height) Decorative Die-cast Aluminium cone (230mm Dia x 150mm Height) coverd on the both section joint area. The single arm pelican orna eva bracket is a split constructed type, bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a decorative collar upto a height of 1615mm crowned at top with a decorative cast aluminium embellisment of 682mm Height. The artistically curved single arm made of MS Pipe 38.1mm x 2mm thick, spruced up with gravity die cast aluminium leaf and floral embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at open ends and other end facilitates the fitment of luminaire at 885mm from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing . Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. The base plate have a cable entry hole as per the base pipe size. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options |
| 2 | SITC OF 9000mm Pelican Orna Eva Florian pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick with 2450mm Height & Top section 114.3mm Dia x 3.2mm thick with 4304mm Height. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height) Decorative Die-cast Aluminium cone (230mm Dia x 150mm Height) coverd on the both section joint area. The double arm pelican orna eva bracket is a split constructed type, bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a decorative collar upto a height of 1615mm crowned at top with a decorative cast aluminium embellisment of 682mm Height. The artistically curved double arm made of MS Pipe 38.1mm x 2mm thick, spruced up with gravity die cast aluminium leaf and floral embellishment, is firmly held to the stem by way of cast iron clamps and the arm bears cast iron knobs at open ends and other end facilitates the fitment of luminaire at 885mm on either sides from the vertical axis of the bracket stem. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope . The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. Mild steel mounting plate 300mm square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215. The base plate have a cable entry hole as per the base pipe size. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. All dimension are within +/- 5% tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options |
| 3 | Supply of 150W LED pendant mounted compact street light. Type IV (Asymmetrical light distribution). Luminaire made of specially contoured spun aluminium body of high corrosion resistance with a neck design for unique and better aesthetics and non corrosive stainless steel fasteners. Clear polycarbonate diffuser. The mounting arrangement nipple, coupling & Hex nut made of Stainless steel 304 suitable for mounting to internally threaded pipe of designation M30. Protection class IP65/66. Mechanical resistance IK09 (Polycarbonate diffuser). Pure polyester powder coated RAL9004 Black, RAL9007 Grey aluminium, RAL7016 Anthracite grey, Graphite grey or as per site requirement. Available colour temperature 3000K / 4000K / 5700K, Colour rendering index (CRI)>70. LED module with expected service life of at least 72,000 operating hours with minimum luminous flux of 120-125lm/W. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension :634mm diameter x 676mm height. CE & BIS Certified. The manufacturer shall have in house NABL certified testing facility for street light luminaire viz- LM-79, IP test, IK test. Oven to bake coating Required luminaire. The EIC will visit the plant to ascertain the required testing equipment’s, plant and machinery. Following test reports will be required with the material. LM-79 IP-65/66 IK-09 LM-80 FOR LED BIS OF DRIVER BIS OF STREET LIGHT C |
| 4 | Supply of Laser cut designer bollard Input power : 12-25W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of extruded aluminium tube, aluminium components and external non corrosive stainless steel fasteners. Inner toughened glass. Bespoke laser cutting design. Pressure die cast aluminium mounting plate 167mm diameter x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110. The base plate have a cable entry hole of 75mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK10. Pure polyester powder coated RAL 9004 Black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 6500K. Colour rendering index (CRI)90. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 3KV. Luminaire dimension : 166mm diameter x 1500mm height. CE & BIS Certified. Inhouse NABL accredited lab |
| 5 | Supply of - Wall Bracket Input power : 60W LED e Pole top luminaire. Type III (Asymmetrical light distribution). Luminaire made of extruded aluminium alloy (grade 6063) of high corrosion resistance. Polycarbonate optical lens. Pressure die cast aluminium mounting base for surface mounting on wall. All external screws are made of stainless steel. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated RAL 9004 Black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours Minimum lumnnous flux 120lm/W @4000K. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension : 600mm length x 120mm width x 80mm height. CE & BIS Certified. Inhouse NABL accredited lab. |
| 6 | CABLES Aluminium Armoured Cable:/ Copper Flexible Cable Voltage: 1100V Conductor:Stranded Class 2 Aluminium Conductor Insulation: XLPE as per IS 7098(Pt-1)/88, Latest Inner Sheath: Wrapping of Tape inner sheath Armoure: Galvanised Steel Flat strip armour Outer Sheath: Extruded FR-LSH PVC Type 'ST2' as per IS:5831 Standard:-IS 7098 Part I/88, IS 8130/2013, IS 5831/84, IS 3975/1999 etc. with latest up to date amendments Copper Armoured Cable: Voltage: 1100V Conductor:Stranded Class 2 Copper Conductor Insulation: XLPE as per IS 7098(Pt-1)/88, Latest Inner Sheath: Extruded PVC Type 'ST2' as per IS:5831/84 Armoure: Galvanised Steel Flat strip armour Outer Sheath: Extruded FR-LSH PVC Type 'ST2' as per IS:5831/84 Standard:Generally as per IS 7098 Part I/88, IS 8130/2013, IS 5831/84, IS 3975/1999 etc. with latest up to date amendmentsSupply, testing & Commissioning of XLPE insulated - Outer sheath Extruded FRLS medium voltage Armoured Aluminium cables as per the specifications, drawings & instruction of Engineer-in-charge and as per the instruction of the manufacturer. The cable shall be laid with saddaling in open manner on wall/slab from SFU to Main Panel / Main Panel to Distribution board / distribution board to distribution board. The unit rate shall include supply & laying of cables,Transportation from site store to place of installtion,unpacking the drum and return of drum to the site store. 4C X 16 sq.mm XLPE - FRLS Aluminium Armoured cable |
| 7 | Supply, testing & Commissioning of XLPE insulated - Outer sheath Extruded FRLS medium voltage Armoured Aluminium cables as per the specifications, drawings & instruction of Engineer-in-charge and as per the instruction of the manufacturer. The cable shall be laid with saddaling in open manner on wall/slab from SFU to Main Panel / Main Panel to Distribution board / distribution board to distribution board. The unit rate shall include supply & laying of cables,Transportation from site store to place of installtion,unpacking the drum and return of drum to the site store. 4C X 25 sq.mm XLPE - FRLS Aluminium Armoured cable |
| 8 | Supply, testing & Commissioning of XLPE insulated - Outer sheath Extruded FRLS medium voltage Armoured Copper cables as per the specifications, drawings & instruction of Engineer-in-charge and as per the instruction of the manufacturer. The cable shall be laid Inside the pole . The unit rate shall include supply & laying of cables . 3C X 2.5 sq.mm Copper XLPE - FRLS flexible cable |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Upto 35 Sqmm |
| 10 | Supply & making end Termination with brass Compression Gland and Aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as Required 4 x 16 Sq. mm ( 28 mm ) ( DSR 2022-24 9.1.33 ) ( DSR 2022-24 9.1.33 ) ( DSR 2022-24 9.1.33 ) ( DSR 2022-24 9.1 |
| 11 | 4 x 25 Sq. mm ( 28 mm ) ( DSR 2022-24 9.1.34 ) ( DSR 2022-24 9.1.34 ) ( DSR 2022-24 9.1.34 ) ( DSR 2022- |
| 12 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm Dia ( OD-63 mm & ID-51 mm Nominal .) ( DSR 2022-24 , 14.16.1 ) |
| 13 | Supply, Installation, Testing and Commissioning of a Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivory connectors for the internal terminations and external outgoing connecting points, fibre/brass glands of suitable size fitted MCB control for outgoing circuits. Contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount/wall mount options. — 3 Nos of 20A 4P Outgoing MCBs. — 1 No of 32A 4P Incoming MCB.The panel shall additionally be integrated with a smart IoT-based Cabinet Controller enabling remote ON/OFF control, real-time energy monitoring (V, I, kW, kWh, PF), astronomical scheduling, and fault alerts via cloud-based LMS platform. Communication shall be via dual SIM 4G for upstream cloud connectivity and RF Mesh/subGHz wireless for individual streetlight controllers at pole level. The City Cabinet shall include GPS, accelerometer-based tamper detection, FOTA capability, and a TALQ 2.0 certified web and mobile platform with 5-year cloud hosting. IP55 rated, RAL7035 powder coated enclosure with 5-year hardware warranty. |
| 14 | Supply and Fixing of G.I. Chemical earthing 03 mtr deep including with GI electrode with chemical required G.I earth wire for Connection etc. Complete in all respects. |
| 15 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required . Above 8 Mtr . Upto 10 Mtr. ( DSR 2022-24 , 11.3.3 ) |
| 16 | Dismantling of existing electric pole Tubular Pole installed at ISBT including removal of conductors, insulators, cross-arms, and all fittings & fixtures, excavation of pole from ground, stacking of serviceable materials, disposal of unserviceable materials as directed by Engineer-inCharge, including all labour, tools & tackles, complete in all respects . |
| 17 | Supply, Installation, Testing and Commissioning of All in One Solar Street Light (Polaris Model) LED Rated Power: 40W LED. Power of PV Module (W) Mono Perc: 120W Lithium Battery Capacity (Lifep04): 54Ah. Smart Features: • Inbuilt Remote Monitoring System (RMS) for real-time monitoring of system health and operational parameters via a centralized dashboard. • Remote control capability through the RMS dashboard, including ON/OFF switching and dimming control. • Inbuilt anti-theft alarm system to safeguard the luminaire against theft or tampering. • Sim Cards + Cloud + Dashboard + recharge 5 Years • With Mounting Clamp • Warranty 5 years •Luminous efficacy ≥ 170 lm/W |
| 18 | Supply of Conical pole with 6 mtr height, Continuously tampered circular pole made of Hot rolled steel flat ( E250 to IS 2062 :2011) 140mm Bottom Dia x 76mm Top Dia x 3mm thick. All pole sections are welded using Submerged arc welding technique by certified welders by using automatic machine with precised welding.The base plate of the of the pole shall be E 250 grade MS 250 mm x 250mm, 12mm thick confirming to IS2062:2011 shall be facilitated with elongated slots to suit the 500mm J-type M16 bolts, Grade 4.6 that shall be provided with suitable nuts and plain washers.Built-in control box with cast aluminum service door and safety rope and vandal proof arrangement. Die cast aluminum door is contoured to the shape of the pole with silicone rubber gasket. The control gear tray is pre-wired with MCB, terminal connectors for loop-in / loop-out arrangement. The foundation bolt holes in the base plate are designed to be elongated for fine adjustments / alignment of the pole during installation, manufacturer should supply die cast aluminum to cover the foundation bolts. Base plate made of steel grade E250 & foundation bolt of grade 4.6 . Must carry out Shot Blasting process (in-house) to remove surface impurities Like Rust, Dust, Oil and Chemical etc. The pole is coated with epoxy zinc phosphate primer and finished using environmentally stable powder coated (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options. Must have inhouse manufacuturing facilities. |
| 19 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required . Above 4.5 Mtr . Upto 6 Mtr. ( DSR 202224 , 11.3.1 ) |
| 20 | For installation of 9 Mtr Conical Pole, a reinforced cement concrete (RCC) foundation shall be provided suitable for safe structural stability under wind load conditions. The foundation depth shall be maintained between 1.2 Mtr to 1.5 Mtr below ground level depending upon soil bearing capacity and site condition. The pole base plate size shall be 380 mm × 258 mm and foundation design shall be compatible with the same dimensions. The RCC foundation shall be of minimum size 600 mm × 600 mm × 1200/1500 mm depth using M-20 grade concrete with machine mixed and properly vibrated concrete. The pole shall be erected with suitable GI foundation bolts, nuts, spring washers and template arrangement for accurate alignment. The conical pole shall be securely fixed over the RCC foundation with proper grouting. Suitable PVC/GI pipe shall be provided for underground cable entry and exit. The top portion of foundation shall be finished approximately 150 mm above ground level with proper slope to prevent water stagnation. The complete job shall include excavation, PCC, RCC work, reinforcement, curing, backfilling, grouting, erection of pole and all labour & materials required for complete installation as per relevant IS specifications and approved engineering standards Please Enable Macros to View BoQ information |
