|
| 1 | Boring of 30cm dia piles of single under reamed of 50cm dia of bulb and 3.5 meter depth in black cotton soil with hand operated auger machine including all laboure T&P etc. for proper completion of work as per IS code-2911(Part-III) 1980. |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:(All kinds of soil)As per DSR-2.1.1 |
| 3 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.As per DSR-2.27 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).As per DSR-4.1.8 |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) :.As per DSR-5.2.2 |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.As per DSR-5.22.1 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns.As per DSR-4.3.1 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse).As per DSR-6.1.1 |
| 9 | 2.5 cm (1\\") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4\\") graded approved stone laid in panels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3\\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse).As per DSR-6.1.1 |
| 11 | CEMENT PLASTER (IN FINE SAND)12 mm cement plaster of mix :in 1:4 (1 cement: 4 fine sand).AS per DSR No.- 13.1.1 |
| 12 | Making grooves 10 to 12 mm wide X 8mm deep in plaster of the wall or in celing vertically or horzontally as required. |
| 13 | P/L 20 mm thick Kota Stone flooring over 20mm thick baseof cement mortar 1:4 ( 1Cement :4 Coarse sand ),laid overjointed with grey cement slurrymixed with pigment to matchthe shade of slabe includingrubbing and polishing complete |
| 14 | Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work |
| 15 | Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work. |
| 16 | Supply & fixing of 4 cm. (1/½\\") thick commercial quality Sitapur Ply or other approved ply wood flush door shutters including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges, bolts, locks, handles, springs, and /or other fitting but excluding their supply and including painting with two coats of Black japan on all iron fitting if necessary & including fixing the glass panes putty & brad. Glass to be 0.64 Kg. ( 21 oz) fitting with necessary.S.I.No-470 |
| 17 | Painting or varnishing new iron work in small areas of new wood of 1 sqm area with one coat of ready mixed priming paint and two coat or approved superior quality ready mixed paint or varnish including supply of all material, labour and T&P etc. required |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Painting one priming cote and two cote oil distemper on new work including supply of all mateirals, labour and T&P etc. required for proper completion work. |
| 20 | S/F Rain Water pipe 110 mm dia PVC complete with 2 or more coat |
| 21 | Finishing walls with water proof cement paint of approved make and quality on new work with Three coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work.S.I. No ' 660 |
| 22 | P/fixing of penes of glass witth and i/c atul or equivalent ISI mark quality putty and brads and spring i/c supply of all materials labour t&p etc.5.5 mm Thick |
| 23 | Making apron along building i/c all cost of material ,labour ,T&P etc all complete. |
| 24 | Supply & fixing galvanzad mosquitos proof heavy quality iron wire gauge or expended mrtal have quality over windows & including supply of C.P. Teak wood battens 8cm. x 1cm. (3\\"x3/8\\") and including supply and fixing of necessary screws, all materials, labour and tools and plants etc. required for proper completion of the work. S.I. No. 455 |
| 25 | Providing & fixing white vitreous china wash basin with C.I. white, 15mm C.P. brass pillar taps, C.P.brackets paintedbrass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required . a) Flat back wash Basin size 500x400 mm size |
| 26 | Providing and fixing 600x450mm bevelled Edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers. |
| 27 | Providing and fixing 15 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)S.I.No-201 |
| 28 | Providing and fixing 20 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)S.I.No-202 |
| 29 | Providing and fixing 25 mm. dia. B-Class (Jindal, J.T.C. make) ISI marked G.I. pipe complete with G.I. specials such as bends, tee, socket cross, clamps, earth work including filling the trenches etc. required for proper completion of the work. The rate also includes concealed G.I. fitting, where required, cutting and making, good the walls etc. and materials, labour, T&P etc. complete. (Internal work)S.I.No-203 |
| 30 | Providing and fixing STEEL SINK 610mm x 450mm x 250mm with out drainage board sink of , Perry, Blue star, Eagle make Ist quality ISI marked with RS or CI brackets, CP brass chain with rubber plug 32 mm dia with necessary unions, 32mm CP brass waste complete with checknut, 32mm CP brass trap with necessary unions including supply of all materials, labour, T&P etc required for proper completion of work and including cutting and making good the walls where required with cement, sand of grit fittings used should be of superior quality. |
| 31 | Supply and fixing low density polythene tank sintex or equivalent.S.i.no-248 New item |
| 32 | Providing and fixing 15 mm. dia. PVC ball float valve with barss rod and union complete ISI marked including supply of all materials, labour and T&P etc. required for proper completion of the work.S.I.No-219 |
| 33 | Supply and fixing C.P. brass stop cock (350 gram) heavy quality 15 mm. dia. ISI marked including cutting and threading the pipe, if required including supply of all materials, labour and T&P etc. required for proper completion of the work.S.I.No-245 |
| 34 | Providing and fixing full way brass gate value 25 mm. dia. With wheel valve ISI marked heavy quality including supply of all material labour, T&P etc. required for proper completion of the work.S.I.No-215 |
| 35 | Providing and fixing full way brass gate value 20 mm. dia. With wheel valve ISI marked heavy quality including supply of all material labour, T&P etc. required for proper completion of the work.S.I.No-214 |
| 36 | Providing and fixing 750 mm. x 30 mm. size CP brass towel rail of approved quality (weight 275 gms. Including brackets) with a pair of CP brass brackets (to fit the size of towel rail) fixed on the wall on wooden cheats with CP brass screws including supply of all materials, labour, T&P etc. required for proper completion of the work and cutting and making good the wall plaster etc. required for the work.S.I.No-334 |
| 37 | Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials, labour, T&P etc. required for proper completion of the work.S.I.No-336 |
| 38 | Apprpoximate cost of and oxidized iron fittings with screws for doors and windows etc.S.I.No-472 |
| 39 | 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4\\") graded approved stone laid in panels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3\\") thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½\\") gauge in the proportion of 1:2:4 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work.(On roof)S.I.No-602 |
| 40 | Providing and fixing solar system operate outomatimatic lights with pole in park High Mast Light |
| 41 | Construction of 5 sheeter toilet |
| 42 | COMPLETE ELECTRIFICATION WORK |
| 43 | Add 18 % GST Please Enable Macros to View BoQ information |
