|
| 1 | Earth work in excavation from foundation… |
| 2 | Earth work filling in foundation… |
| 3 | Single Brick flat solinf of picket jhama brick incliding ramming & dressing bed … local sand |
| 4 | Ordinary Cement Concrete work (1:2:4) with 20mm graded stone chips |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc |
| 7 | Hire & labour charges for shuttering with entering & necessary staging upto 4m using approved stout…. Complete |
| 8 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. |
| 9 | Labour for boring tube well of required dia. by water jet system through any type 5T soil strata including hire and labour charges for boring pipes……… 50mm dia boring etc. |
| 10 | 100 mm dia boring etc.. |
| 11 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes….. 50mm dia boring.. |
| 12 | 100 mm dia boring etc.. |
| 13 | supplying PVC strainer oF approved' make with adapte conforming to I.S.12818 Specifications. 50 mm dia boring.. |
| 14 | Supply of long screw (150 mm long) of TATA make with sockets TATA make and jamnut. |
| 15 | Supplying PVC water storage tank of approved quality with closed top withlid (Black) Multilayer.. 1000 lit. capacity |
| 16 | Labour for hoisting plastic water storage tank.Upto 1500 litre capacity. a) Upto 1st story froM G.L. |
| 17 | Labour for punching hole in plastic water storage tank upto 50 mm dia |
| 18 | Supplying, fitting and fixing heavy type bell mouth reducing socket 50 mm X 100 mm |
| 19 | Supplying, fitting and fixing check valve (horizon tal) G.M. tested to 21 kg per sq. cm. 50mm |
| 20 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications. 71mm |
| 21 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, 15: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and Iength,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to 15:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges,labour insurance charges etc.Payment to be made on the basis of calculated weight of labour insurance charges etc.Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 796 of weight for finished structural members weighing not less than 22.5 Kg./ m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for thes for ebracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made erection 8m. / 2nd floor level from the ground. Add 1.5'# extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m |
| 22 | Supplying, fitting and fixing CPVC pipes of approved reducing tee,make conforming to 15-15778: 2007 . with all necessarY accessories, specials viz.fixing socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, etc. complete in all respect including cost of all necessary fittings s. No separate payment materials in any position above ground. (Payment will measurements of total pipe line including all special made for accesories, specials. 25 mm dia |
| 23 | 50 mm dia |
| 24 | Supplying, fitting and fixing alloy iron withbrass spindlebib cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. 15mm |
| 25 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand paperining etc. On steel or other metal surface |
| 26 | (A) Painting with best quality synthetic enamel paint of approved make and brand Including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (higloss), Two coats except white in shade |
| 27 | Construction of circular soak well 2.5 metre deep in all type brick work upto 1.6 metre from the bottom having 150 mmintermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre |
| 28 | Supplying fixing commissioning and testing Solar Voltaic Module 335 WP 24V 5nos on existing iron from structure each 156 mm Polycrystalline Silicon Solar cells laminated between sheet of Ethyline Vinyl Acilate (EVA) |
| 29 | Supplying Fitting Fixing & Installation of Iron Removing Filter plant Capacity 500 LPH Filter vvorking -Downflow Max Flow Rate -3m3/hr Working Pressure-1-3 kg/cm2 Size -14\\"X65\\" Make Vili/Tata...Others (BIS Standards |
| 30 | Supply and fixing round 2-core 4 sq-mm PVC multi core FR wire for aray connecting. |
| 31 | Supply and fixing MC4 connector for panel loop. |
| 32 | Earthing with 50 mM (2\\") dia G.I. pipe 3.64 mm thick x3rnts. 1-\\"g and 1 x4 SWG G.I. Wire (4 mts. Long) 13mm dia. X 80 mm long G. pipe protection (1 mtr, long) |
| 33 | Power conditioning Unit for 2Hp Pump motor set |
| 34 | Suppy,Installation testing & lowering of 2.00 HP complete having Suitable discharge as per yield test of well.Submersible cable of 3 mtr 3-core 2.5 sq-mm cable with MOC bar chart and necessary Controller and starter |
| 35 | G.S.T & L/Cess (BIS Standards & including pannel board) Please Enable Macros to View BoQ information |
