|
| 1 | TOTAL |
| 2 | SUPPLY, FITTING AND FIXING OF NEW PROPELLER SHAFT AND GEAR BOX CROSS JOINT WITH REPLACEMENT OF OLD DAMAGED CROSS JOINT OF THE VEHICLE WB03C-1278. |
| 3 | SUPPLY, FITTING AND FIXING OF NEW GEAR CHANGER ADJUSTING LEVER WITH REPLACING THE OLD DAMAGED CHANGER LEVER TO THE VEHICLE WB03C-1278. |
| 4 | SUPPLY, FITTING & FIXING OF BALL JOINTS OF GEAR MECHANISM WITH REPLACEMENT OF DAMAGED BALL JOINTS TO THE VEHICLE WB03C-1278. |
| 5 | SUPPLY, FITTING AND FIXING OF NEW GEAR CHANGER BUSH WITH REPLACEMENT OF OLD DAMAGED BUSH OF THE VEHICLE WB03C-1278. |
| 6 | DISMANTLING OF GEARBOX FROM PROPELLERSHAFT ASSEMBY AND CLUTCH MECHANISM TO OVERHAULING OF GEARBOX AND CHANGING OF GEARBOX MOUNTING OF THE VEHICLE WB03C-1278. |
| 7 | OPENING AND OVERHAULING OF GEARBOX, AND CORRECTING THE PROBLEM OF 2NO GEAR SLIPPAGE TO THE VEHICLE WB03C-1278. |
| 8 | SUPPLY, FITTING & FIXING OF NECESSARY ACCESSORIES OF GEARBOX (LIKE - VARIOUS PINIONS, SYNCHRONISER ETC.), IF FOUND ANY OF THESE PARTS DEFECTIVE DURING OVERHAULING OF GEARBOX OF THE VEHICLE WB03C-1278. |
| 9 | BOXING UP THE GEAR BOX AFTER COMPLETION OF OVERHAULING OF THE GEARBOX OF THE VEHICLE 1203C-1278. |
| 10 | SUPPLY, FITTING & FIXING OF NUT BOLT SET OF THE GEARBOX MOUNTING OF THE VEHICLE WB03C-1278. |
| 11 | SUPPLY, FITTING, FIXING OF REAR ENGINE MOUNTING WITH REPLACEMENT OF OLF DAMAGED MOUNTING OF THE VEHICLE WB03C-1278. |
| 12 | SUPPLY, FITTING, FIXING OF FRONT ENGINE MOUNTING WITH REPLACEMENT OF OLF DAMAGED MOUNTING OF THE VEHICLE WB03C-1278. |
| 13 | SUPPLY, FITTING AND FIXING OF NUT BOLT SET TO THE ENGINE MOUNTINGS TO THE VEHICLE WB03C-1278. |
| 14 | DISMANTLING OF CLUTCH MECHANISM FROM THE ENGINE AND FLYWHEEL ASSEMBLY OF THE VEHICLE WB03C-1278 TO RESTORE THE DEFECT OF CLUTCH MECHANISM DURING GEAR ENGAGEMENT. |
| 15 | SUPPLY, FITTING AND FIXING OF NEW PRESSURE PLATE TO THE CLUTCH MECHANISM WITH REPLACEMENT OF DAMAGED PRESSURE PLATE OF THE VEHICLE WB03C-1278. |
| 16 | SUPPLY, FITTING & FIXING OF NEW CLUTCH PLATE WITH REPLACEMENT OF OLD DAMAGED CLUTCH PLATE TO THE CLUTCH MECHANISM OF THE VEHICLE WB03C-1278. |
| 17 | SUPPLY, FITTING & FIXING OF NEW RELEASE BEARING WITH REPLACEMENT OF OLD DAMAGED BEARING TO THE CLUTCH MECHANISM OF THE VEHICLE WB03C-1278. |
| 18 | DISMANTLING OF FLYWHEEL FROM THE ENGINE OF THE VEHICLE WB03C-1278. |
| 19 | MACHINING OF FLYWHEEL TO RESTORE ITS SHINING SURFACE AND PROPERLY FITTING WITH THE CLUTCH MECHANISM OF THE VEHICLE WB03C-1278. |
| 20 | DISMANTLE REAR WHEEL WITH RIM FROM THE VEHICLE WB03C-1278, THEN DETACH THE WHEEL FROM THE RIM AND SUPPLY, FITTING, FIXING NEW REAR (SIZE- 7.50 - 16) TYRE, TUBE AND FLAP WITH REPLACING THE DAMAGED TYRE, TUBE AND FLAP AND FITTING THE NEW TYRE WITH NEW TUBE & FLAP WITH RIM. THEN FIX THE COMPLETE WHEEL SET TO THE VEHICLE. |
| 21 | SUPPLY, FITTING AND FIXING OF NEW WHEEL BEARING WITH REPLACEMENT OF OLD DAMAGED BEARING TO THE VEHICLE WB03C-1278 |
| 22 | REPAIRING OF BRAKE PADDLE UNIT WITH THE CHANGE OF BUSH, PIN, BOLT ETC. AND REQUIRED MACHINING PROCESS WHICH NEED TO BE DONE FOR VEH. NO. WB03C-1278 |
| 23 | SUPPLY, FITTING, FIXING OF COMPLETE MASTER CYLINDER WITH REPLACEMENT OF DAMAGED CYLINDER TO VEHICLE WB03C-1278. |
| 24 | SUPPLY, FITTING, FIXING OF HYDRAULIC OIL SEAL WITH REPLACEMENT OF DAMAGED SEAL KIT TO THE VEHICLE WB03C-1278. |
| 25 | SUPPLY, FITTING, FIXING OF ALL WHEEL OIL SEAL WITH REPLACEMENT OF DAMAGED SEAL KIT TO THE VEHICLE WB03C-1278. |
| 26 | OPENING OF BRAKE DRUMS AND ALSO DISMANTLING THE WHEEL AND THE HUB OF THE VEHICLE WB03C-1278 TO REMOVE BRAKE SHOES. |
| 27 | SUPPLY, FITTING, FIXING OF BOTH SIDE FRONT WHEEL BRAKE SHOES AND FIXING IT TO THE REAR WHEEL BRAKE DRUMS OF THE VEHICLE WB03C-1278. |
| 28 | SUPPLY, FITTING, FIXING OF BOTH SIDE REAR WHEEL BRAKE SHOES AND FIXING IT TO THE REAR WHEEL BRAKE DRUMS OF THE VEHICLE WB03C-1278. |
| 29 | DISMANTLING AND REPAIRING OF BRAKE SERVO AND THEN FIXING THE SERVO TO THE VEHICLE WB03C-1278. |
| 30 | RECUMBERING OF REAR RIGHT LEAF SPRING OF THE VEHICLE WB03C-1278, WHICH IS BEING FLATTENED. |
| 31 | THOROUGH CHECKING OF PIN, BUSH, I BOLT, CENTRE BOLT & U BOLTS OF THE ALL LEAF SPRINGS OF THE VEHICLE WB03C-1278, AND SUPPLY FITTING FIXING THE SAME, IF ANY OF THESE ITEM FOUND DAMAGED DURING CHECKING. |
| 32 | DISMANTLING OF BOTH SIDE FRONT WHEEL FROM THE VEHICLE AND OVERHAULING OF KING PIN PORTION WITH REPLACEMENT OF BUSH, BEARING ETC. AND REQUIRED MACHINING WORK NEED TO BE DONE FOR THE SAME AFTER THOROUGH GREASING ON ENTIRE KING PIN ASSEMBLY AND REFITTING THE BOTH SIDE FRONT WHEEL TO VEH. NO. WB03C-1278. |
| 33 | THOROUGH REPAIRING OF TIE ROD INCLUDING CHANGING TIE ROD END WITH REPLACEMENT OF BUSHING KIT, NUT-BOLT & WASHER ETC. FOR VEH NO. WB03C-1278. |
| 34 | DISMANTLING AND SERVICINIG OF PUMP AND REPLACEMENT OF OIL SEAL KIT ON STEERING MECHANISM AND FITTING IT TO THE VEHICLE WB03C-1278. |
| 35 | DISMANTLING OF POWER STEERING BOX MECHANISM FROM THE FRONT RIGHT LOWER SIDE OF THE VEHICLE AND REPAIR IT TO FIX THE STEERING JAMMING PROBLEM, THEN FIXING IT TO THE VEH. NO. WB03C-1278. |
| 36 | THOROUGH OVERHAULING AND FITTING FIXING OF DYNAMO WITH CHANGE OF NECESSARY ITEMS I.E. CABON, BUSH, FIELD COIL AND REWINDING OF ARMATURE FOR VEH. NO. WB03C-1278. |
| 37 | OVERHAULING OF DIFFERENTIAL PORTION WITH CHANGE OF NECESSARY SPARES I.E. BEARING, SPACER, OIL SEAL, CIRCLIP, DIFFERENTIAL PACKING ETC. AND REQUIRED MACHINING WORK NEED TO BE DONE FOR SHAFT AND GEAR PINION FOR VEH. NO. WB03C-1278. |
| 38 | SUPPLY, FITTING & FIXING OF HYDRAULIC OIL RAM KIT FOR TIPPER MECHANISM OF THE VEHICLE WB03C-1278. |
| 39 | SUPPLY, FITTING & FIXING OF TIPPER LEVER CASING (AS PER SAMPLE) WITH REPLACEMENT OF DAMAGED CASING TO THE VEHICLE WB03C-1278. |
| 40 | SUPPLY, FITTING AND FIXING OF NEW COMPLETE WATER P/P SET WITH REPLACEMENT OF OLD DAMAGED WATER P/P TO RESTRICT THE RADIAL PLAY OF THE RADIATOR FAN OF THE VEHICLE WB03C-1278. |
| 41 | DISMANTLING THE RADIATOR SET WITH BRACKET FROM THE VEHICLE WB03C-1278, AND DETACH THE RADIATOR CORE FROM THE BRACKET AND UPPER & LOWER TANK. |
| 42 | DISMANTLING OF RADIATOR SET, THEN CLEANING AND REPAIR (IF FOUND ANY DEFECT) IT AND FIXING TO THE VEHICLE WB03C-1278. |
| 43 | SUPPLY, FITTING & FIXING OF NEW WATER SEPARATOR WITH REPLACEMENT OF OLD DAMAGED WATER SEPARATOR AND FIXING IT TO THE VEHICLE WB03C-1278. Please Enable Macros to View BoQ information |
