Tender For Construction Of Road From Construction Of C Type Judiacial Quarter (One Unit Duplex) For J.M.F.C. With Approach Road, Drain And Compound Wall At Damapada In The District Of Cuttack For The Year 2024-25., Cuttack-Odisha

TDR : 55962586

Tender Notice
BOQ

11 Days Left

Cuttack , Odisha

Tender Brief : Tender For Construction Of Road From Construction Of C Type Judiacial Quarter (One Unit Duplex) For J.M.F.C. With Approach Road, Drain And Compound Wall At Damapada In The District Of Cuttack For The Year 2024-25.

Document Fees
₹ 10000 /-

EMD
₹ 121810.0 /-

Tender Value
₹ 1.21 Crore /-

Submission Date
24-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in Excavation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
2	I ) Foundation in hard soil or gravelly soil
3	II ) Foundation in Cutting of disintegrated rock not requiring blasting
4	Providing filling manualy with aproved quality sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance,royalty,taxces of materials ,labour & T&P etc complete as per direction of Engineer-In-Charge.
5	Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position ramming using vibrator to proper slope and levelling with cost conveyance taxes royality, labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & cess as per the specifiction and direction of Engineer-in- charge (Crusher Broken )
6	Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.
7	A) Column Base
8	B) Plinth Beam
9	Column / Beam
10	A) Ground Floor
11	B) First Floor
12	C) Second Floor
13	Lintel
14	A) Ground Floor
15	B) First Floor
16	Chajja
17	A) Ground Floor
18	B) First Floor
19	R.C.C. Shelves
20	A) Ground Floor
21	B) First Floor
22	Stair Case
23	A) Ground Floor
24	Roof Slab
25	A) Ground Floor
26	B) First Floor
27	C) Second Floor
28	Drain Bed
29	Drain Side Wall
30	Cover Slab
31	Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance & taxes of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&P required for the work with cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge.
32	A) Ground Floor
33	B) First Floor
34	C) Second Floor
35	2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work with all taxes royalties & cess etc, complete as per direction of Engineer-in-charge.
36	A) Ground Floor
37	B) First Floor
38	C) Second Floor
39	Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-Fly Ash.-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge.
40	A) Foundation & Plinth
41	Superstructure
42	B) Ground Floor
43	C) First Floor
44	D) Second Floor
45	16mm (5/8\\") thick cement plaster in C.M. (1:6) finished smooth to inside surface of 9\\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all taxes, royalties & cess etc, complete in all floor as per direction of Engineer-in-charge.
46	A) Ground Floor
47	B) First Floor
48	C) Second Floor
49	12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with all taxes, royalties & cess etc, complete in all floors as per direction of Engineer-in-charge.
50	A) Ground Floor
51	B) First Floor
52	C) Second Floor
53	Supplying ,fitting and fixing vitrified tile in floors Tile 1200mmx 600mm size of approved shade and make (Single Charge) confirming to IS: 13755 laid on 20 mm thick cement mortar (1:4) ( 1 cement : 4 course sand ) and filling the joints with white cement of approved quality including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
54	A) Ground Floor
55	B) First Floor
56	Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
57	A) Ground Floor
58	B) First Floor
59	Fixing ceramic tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
60	A) Ground Floor
61	Supplying ,fitting and fixing Granite tile in floors of approved shade and make confirming to IS: 13755 laid on 20 mm thick cement mortar (1:4) ( 1 cement : 4 course sand ) and filling the joints with white cement of approved quality including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
62	A) Ground Floor
63	Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete.
64	A) Ground Floor
65	B) First Floor
66	C) Second Floor
67	Supplying, fitting, fixing of WPC Door Frames with Rebate Cuts and Finished cross section size 75mmx45mm or 90mm x 50mm including cost, conveyance of all materials and labour etc. complete as per the direction of Engineer-in-Charge.
68	A) Ground Floor
69	B) First Floor
70	C) Second Floor
71	Providing and fixing of 30mm thick Flush Door Shutters conforming to IS:2002 (Part-I) decorative type, core of block board construction with frame of 1st class hard wood and and well matched teak 3 ply veneering with vertical grains or cross bands and face vineers on both face of shutters inclusive of 4 Nos. of Stainless steel Butt Hinges (100mm x 60mm x 2.5mm) 40mm stainless steel screws, Cylindrical Lock (Godrej-9843), Tower Bolt SS 10 x 300mm (Bathroom) (Godrej 3264), PVC Door Buffer with SS Screw, teak wood lipping around the edges & paste with 1.5mm thick laminate on both side of the flush door, etc. including cost of all materials, hardware fittings, cost of all labour, conveyance, loading, unloading, T&P, etc. complete as per the direction of Engineer-in-Charge.
72	A) Ground Floor
73	B) First Floor
74	32mm thick piasal wood or local teak wood fully glazed shutters complete with iron fitting and wooden hinged cleats etc., fitted and fixed in position including all labour, but excluding the cost of glass panes and iron fittings with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including cess as per the specification and direction of Engineer-in-charge.
75	A) Ground Floor
76	B) First Floor
77	Providing & fitting,fixing all Fittings (Aluminium) such as Handle ,Aldrop ,Tower bolt , Hinges.....etc. to the frames of doors, windows, ventilabours etc complete with cost,conveyance & taxes of all materials & labour with T&P required for the work in all respect as per specification & direction of the Engineer-in-charge.
78	A )Butt hinges
79	A) Ground Floor
80	Door (125mnx75mmx4mm)
81	Window 75mmx63mmx4mm
82	B) First Floor
83	Door (125mnx75mmx4mm)
84	Window 75mmx63mmx4mm
85	B) Aluminium handle
86	A) Ground Floor
87	Door (125mm with 175mm x 40mm flat)
88	Window (100mm with 150mm x33mm)
89	B) First Floor
90	Door (125mm with 175mm x 40mm flat)
91	Window (100mm with 150mm x33mm)
92	C)Aluminium tower bolt
93	A) Ground Floor
94	Door (200mm x 10 mm )
95	Window 100mm x 10mm
96	B) First Floor
97	Door (200mm x 10 mm )
98	Window 100mm x 10mm
99	D )Aldrop
100	A) Ground Floor
101	Door (250mm x 16mm )
102	B) First Floor
103	Door (250mm x 16mm )
104	E )M/S. Screw(20x5mm)
105	Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
106	A) Ground Floor
107	B) First Floor
108	Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the specification and direction of Engineer-in-charge.
109	A) Ground Floor
110	B) First Floor
111	C) Second Floor
112	Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge.
113	A) Ground Floor
114	B) First Floor
115	C) Second Floor
116	Wall painting two coats with any approved quality of Weather seal coat over one coat of Primer with any approved shade including cost of paint on New Plastered surface of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete.
117	A) Ground Floor
118	B) First Floor
119	C) Second Floor
120	Painting two coats in all floors to new iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
121	A) Ground Floor
122	B) First Floor
123	C) Second Floor
124	Painting two coats in all floors to new wood work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
125	A) Ground Floor
126	B) First Floor
127	French polishing to wood work 2 coats in all floors to new wood work including sand papering , polishing the surface, cost conveyance and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
128	A) Ground Floor
129	B) First Floor
130	Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.
131	Providing and fixing 100 mm dia PVC rain water down pipe with necessary bend shoes and heads etc. 1 mtr long with all cost of labour and materials etc. complete.
132	A) Ground Floor
133	B) First Floor
134	Providing and fixing false ceiling (12.5mm Gypsum Board ) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :Providing fitting, fixing of false ceiling with Aluminium anodized T section No-3215 with 2'-0\\" center to center ,L section No-1705 upto 15 micron on 4 walls to be fixed bu means of steel screw and P.V.C. plug and the Aluminium grid 2'-0\\" x 2'-0\\" with Gypsum board suspended from ceiling etc compiete . including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete in all respects as per the direction of Engineer-in-Charge.
135	A) Ground Floor
136	I )12.5 mm thick Gypsum board false ceiling
137	II )12.5 mm thick Gypsum board corner pcs
138	B) First Floor
139	I )12.5 mm thick Gypsum board false ceiling
140	II )12.5 mm thick Gypsum board corner pcs
141	Filling in foundation and plinth with excavated materials including watering ramming to proper density with cost,conveyance, taxes of all materials and cost of all labour & T & P as required for the item of work including cess etc complete as per specification & direction of Engineer-in-charge.
142	Cement concrete (1:2:4) with 12mm size broken hard granite chips for including hoisting and lying per 1cum etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge.
143	Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
144	E.I. Works
145	Wiring
146	Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )
147	Group A
148	Group B
149	Group C
150	Recessed wiring to Fan Point in...
151	Group B
152	Recessed wiring to Call Bell Point in...
153	Group B
154	Recessed wiring to Exhaust Fan Point in…..
155	Group B
156	S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
157	S/F of Angle holder replacing Ceilling Rose
158	Swich Boards
159	S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
160	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch complete with wiring on 12 modular M.S. box with modular cover.
161	S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
162	S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
163	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
164	S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection
165	S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
166	2 Modular box with base & cover
167	4 Modular box with base & cover
168	6 Modular box with base & cover
169	8 Modular box with base & cover
170	12 Modular box with base & cover
171	Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)
172	2x1.5+1x1.5 (1.8.1)
173	2x2.5+1x1.5 (1.8.2)
174	2x4+1x1.5 (1.8.3)
175	4x4+2x2.5(1:8:9)
176	4x10+2x4(1:8:11)
177	Inverter wiring (1x1.5smm) Copper wire (1.19.1)
178	Circuit Breakers
179	S/F of 'C' series SP MCB of 10 to 32A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens)
180	S/F of 'C' series DP MCB of 6A to 32 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens)
181	S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens)
182	S/F of 4Way (8+12) TPN Double Door Distribution Board ISI marked complete with all accessories and connection etc. as required (Make : Legrand / Hager / Scheider / Seimens)
183	Earthing
184	Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18)
185	S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6)
186	Supply of UL Listed & CPRI Tested maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 17 mm with copper coating thickness of 250micron tested as per IEC 62561-2. Universal clamp made of SS to connected rod with flat conductor earth conductivity enhancing compound shall be of 25 kg / pit tested as per IEC 62561-7, TCLP tested.The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system. Earth electrode shall be tested as per IEC 61561-2.1) Copper coting Thickness-Minimum 250 Micron.2) Electrical Resistivity Test: Maximum electrical resistivity should be 0.25.3) Electrical resistance test before and after salt mist test.4) Tensile Test.5) Bend6) Adhesion Test.The Earth Enhancing Mineral Compound shall be tested as per IEC 62561-7.1) Sulphur Content: Less than 2%2) Resistivity 0.2 ohms.3) The Compound shall be tested and passed toxicity leaching charcacteristic leaching properties.4) Corrosion resistance: The value observed under dry and wet condition is greater than 4 ohm meter square.5) The earth enhancing mineral compound is non-hazardous in.
187	Fittings
188	Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31)
189	Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB )
190	S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic)
191	Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo )
192	S/F step type modular fan regulator
193	Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 )
194	Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic )
195	S/F of 10w Watt LED Bulb ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic )
196	S/F of 1.5 T 3 Star Inverter Model Split Type AC Machine (Make- Hitachi/Blue Star/Carrier/Daikin/LG/Mitsubishi/O-General)
197	S/F of 4KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard
198	S/F of PVC hard drainage pipeline system.
199	6sqmm 3 core copper round cable
200	S/F of 2000VA/24V Invertor machine with 2 nos 180Ah tall tubular Battery including Trolly (Make-Luminous /microtek/v-guard)
201	S/F of 15W LeD Panel ceiling light (Havels/crompton/philips/panasonic)
202	S/F of 15A socket on 2Modular Board board for A.C
203	S/F of 32A Flush type D.P. Switch for A.C (Make: Cona/ Anchor)
204	S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)
205	Cables
206	Provision of Armoured cable size 3 1/2 x 25sqmm (24)
207	Laying of MV cable upto 25sqmm in ground (5.1.1)
208	Laying of MV cable upto 25sqmm on surface (5.5.1)
209	S/F of 50mm HDPE pipe for laying of cable & protection.
210	Panels
211	Supply & fixing of 63 A TPN Panel board 1. 63A MCCB (Make : Legrand / Hager / Scheider / Seimens)-1No.2. 32A DP MCB (Make : Legrand / Hager / Scheider / Seimens)-2No.3. TPN Busbar-1set with DC Gland for 25mmsq aluminium armoured cable and 4. 4Pole Spreaders link (63A-200A)5. 63Amp 4P Changeover-1No.6. 40Ka SPD-1No.7. Digital Volt meter & Ameter three phase 8. All accesories & Connection (Rating & Danger borad)
212	P.H. Works
213	15 user septic tank
214	Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.
215	Initial lift upto 1.5 mtr
216	From 1.5 mtr to 3.0 mtr depth
217	Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.
218	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
219	Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
220	Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
221	In Foundation and Plinth in C:M (1:4)
222	Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
223	12 mm thick C.P in C:M (1:3)
224	Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
225	Same as above item 20mm C.P in 1:3
226	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
227	Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
228	Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
229	Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
230	Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
231	Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
232	Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
233	Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
234	Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C.Door Frame
235	Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
236	Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.Ground Floor Wall
237	First Floor Wall
238	Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor
239	First Floor - Floor tile
240	Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC.
241	Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall
242	375mm thick wall
243	Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C.
244	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
245	Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra).Wall mounted water closet (Parryware)
246	Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra)
247	Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe
248	160mm dia UPVC SWR Pipe
249	110mm dia U-PVC S. Trap
250	110mm dia U-PVC P. Trap
251	110mm U-PVC S/J with Door
252	110mm U-PVC door bend
253	110mm dia U-PVC Plain bend
254	110mm U-PVC Plain Tee
255	110mm U-PVC Cowl
256	125mm dia CP Grating
257	75mm dia U-PVC SWR Pipe
258	75mm dia U-PVC Plain Tee
259	75mm U-PVC Door Bend
260	75mm U-PVC Plain Bend
261	Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC including the cost of waste pipe , 610x510x200 mm Stainless Steel kitchen Sink with heavy good quality reputed company.
262	Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC including all pipe connection .550x400mm WHB-(Hindware / Paryware/Nycer/ cerra )
263	Pedestral 550x400mm WHB
264	Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality
265	Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Jaquar make
266	CP Towel ring heavy Stainless steel with Jaquar make .
267	Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality
268	Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm)
269	Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality
270	Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Hindware / Paryware/Nycer/ cerra )
271	Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap
272	Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber
273	Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber
274	Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep
275	Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit
276	Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing
277	Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing
278	Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C.
279	20 mm dia C-PVC Pipe( Internal)
280	25mm dia C-PVC Pipe (external)
281	40mm dia C-PVC Pipe (external)
282	Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock JAQUAR Make
283	20mm dia cp concealed stop cock JAQUAR Make
284	15mm dia cp angle stop cock JAQUAR Make
285	15mm dia cp bib cock S.B. JAQUAR Make
286	15mm dia cp bib cock L.B. JAQUAR Make
287	15mm dia CP Two way bib Cock JAQUAR Make
288	Health Fuccet JAQUAR Make
289	15mm dia CP flange JAQUAR Make
290	15mm dia CP Extension piece JAQUAR Make
291	25mm dia Brass Ball Valve
292	40mm dia Brass Ball Valve
293	Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC.
294	2000 lit sintex tank (2nd Floor)
295	Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.
296	2000 ltr capacity tank 2nd floor
297	Additional ht of 5.00mtr
298	Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
299	Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
300	Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
301	Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
302	Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
303	Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe)
304	SINKING OF TUBE WELL
305	Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well.
306	a) Labour for Drilling
307	i) 0.00 mtr to 91.00 mtr & above
308	Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.
309	a) Lowering of 125mm dia PVC casing pipe
310	i) From 0 mtr to 30.00m and above
311	b) Cost of 125mm dia PVC casing pipe (80 Sch)
312	i) From 0 mtr to 30.00m and above
313	Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Road Construction Tenders

Road Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Road From Construction Of C Type Judiacial Quarter (One Unit Duplex) For J.M.F.C. With Approach Road, Drain And Compound Wall At Damapada In The District Of Cuttack For The Year 2024-25., Cuttack-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Road From Construction Of C Type Judiacial Quarter (One Unit Duplex) For J.M.F.C. With Approach Road, Drain And Compound Wall At Damapada In The District Of Cuttack For The Year 2024-25., Cuttack-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us