|
| 1 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' bricks in CM (1:4) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed. |
| 3 | All as per item No 02 above but except bricks (old dismantled serviceable bricks obtained from srl Item No 01 shall be reused after necessary cleaning of mortar) complete all as specified and directed. |
| 4 | Taking down cement plaster on brick/stone/concrete walls /ceiling incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed. |
| 5 | M&L for 15mm thick cement plaster in Cement motar1:4 on fair faces of brick or concrete work and finishing the surface even and fair (without using extra cement) incl WPC @3% weight of cement etc. complete all as specified and directed.Note - WPC will be measured and paid separately under appropriate items |
| 6 | Supply only liquid integral water proofing compound complete all as specified and directed. |
| 7 | Material and labour for two coats of Acrylic smooth exterior paint of required shade on new plastered surfaces of walls (Two coats applied @ 1.67 Ltr/10 Sqm each coat) over and including priming coat of exterior primer including preparation of surfaces complete all as specified and as directed. |
| 8 | Material and labour for applying one coat of Acrylic smooth exterior paint of required shade on old plaster surface of walls incl preparation of surfaces (one coat applied @ 1.67 Ltr/10 Sqm each coat) complete all as specified and as directed. |
| 9 | M&L for applying two coat of cement base paint including preparation of newly plasterd or previously untreated surfaces of walls, pillars cornces etc complete all as specified and directed. |
| 10 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 11 | M&L for applying one coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. |
| 12 | M&L for applying one coat of synthetic enamel paint on steel surface of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed. |
| 13 | M&L for 35 mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed. |
| 14 | M&L, in repair for precast RCC pillar in 1:2:4 type B0 (using 12.5mm graded aggregate) decorative type of size (100mm x 100mm & 750 mm high) for RCC jalli incl fixing in conc etc incl dismantling existing pillar complete all as spd and directed. |
| 15 | M&L for Providing cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) in bed block for hold fast, mud stops, roof kerbs, sloping padding in roof, rounded or chamfered on edges and similar works complete all as specified and directed . |
| 16 | Excavating in post holes (or similar holes ) each n.exc. 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth round in layers n.exc. 25 cm in any kind of soil, watering and removing surplus soil to a distance n exc 50m an making good to surface |
| 17 | M&L for cement concrete type C-2 1:3:6 (40mm graded aggregate) as in foundation filling,post holes complete all as specified and directed. |
| 18 | M&L for cement concrete type B-1 1:2:4 (20mm graded aggregate) as in lintel and similar bands,parapet and coping including any formwork required complete all as specified and directed. |
| 19 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 20 | Dismantling of fencing mesh with wire of any type and any description complete all as specified and directed. |
| 21 | Supply only MS galvanised chain link fencing any size any type complete all as specified and directed. |
| 22 | Fixing only chain link fencing including line wires, any shape, any mesh, size, rails, straining bolts etc complete all as specified and directed. |
| 23 | Dismantling of structural steel work including doors, gates and similar structure complete all as specified and diretced |
| 24 | M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire meshetc.), Nut & bolt including all necessary drilling,etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed.Note : Unit rate is also included for locking holes with wire after fixing of barbed wire and welding to bent up portion as directed. |
| 25 | S&F steel work in tubular trusses and posts, vertical/horizontal bar, chin up bar and similar work including special shaped washers,chequered plates,etc complete using butt welded tubes conforming to IS 1161-1979 graded st-240 including dismantling of old mild steel of any description complete all as specified and directed. |
| 26 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,guide rail,braces, etc and similar work complete all as specified,drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging also fastening and fixing (Fe 410-W(Gde E-250)) quality A complete all as specified and directed. |
| 27 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed. |
| 28 | S&F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed. |
| 29 | S&F, in repair, for 5 mm thick ACP (Aluminium composite panel) board prelaminated one sides with decorative choice laminations and fixed with screws to aluminium frame including aluminium of size pipe 40mmx25mm and 1.5mm thick best quality work complete all as specified and directed. |
| 30 | S&F Pre-painted Galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering, chajjas/walls, fitting & fixing, zinc coating including tapping screw and etc complete all as specified and direced.Note- Design/Pattern/colour of roofing sheet as approved by GE. |
| 31 | S&F pre- painted Galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covring, fixing ,zinc coatting including self tapping screw etc.complete all as specified and direced. |
| 32 | M&L for mild steel round bars 10mm dia Fe 410- Gde E-250 around fencing hooking,welding and straining properly to fencing complete all as specified and directed. |
| 33 | Mild steel TMT bars 8 to 10 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, including welding with mild steel completed all as specified and directed. |
| 34 | Taking down of old gate, area n exc 9 Sqm and erection and refixing the same after making it serviceable, easing, renewing and greasing, oiling complete including cutting, filling for hold fast incl making good in PCC 1:2:4, type B-0 as required, including one coat of synthetic enamel paint to MS gate as required complete all as specified and directed. |
| 35 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness as in floors,aprons,riser and steps etc complete all as specified and directed. |
| 36 | M&L for Granite 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid over 15 mm thick cement mortar 1:4 including pointing with coloured pigment using marble dust to match with shade of granite and rounding the edges of granite stone slabs wherever required complete all as specified and directed. |
| 37 | M&L for Precast RCC (1:2:4) type B-1 using 20mm graded stone aggregate set in cement mortar 1:6 as in landings, cover slabs for manhole etc,water tank base and similar work complete all as specified and directed including demolition of existing RCC and any formwork. |
| 38 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick verticale tiles with highlighter any colour on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and e colour of tiles, incl dismantling / demolition over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed. |
| 39 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed. |
| 40 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floo to receive floor finishing complete using necessary formwork complete all as specified and directed. |
| 41 | M&L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 42 | S&F machine pressed coloured (yellow, red, black, white as directed) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand incl dismantling of stone slab and tiles of any description of thickness in floors/aprons etc complete all as specified and directed. |
| 43 | M&L for Providing cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) in bed block for hold fast,mud stops,roof kerbs,sloping padding in roof,rounded or chamfered on edges and similar works complete all as specified and directed . |
| 44 | M&L for 100mm thick cement concrete type B-2,1:2:4 (40mm graded aggregate) as in flooring including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | M&L for hardcore of broken bricks of gauge n.exc 63mm,deposited,spread and levelled in layers n.exc 15cm thick, watered and rammed to true surface complete all as specified and directed. |
| 46 | M&L for forming Construction Joint 30 mm deep x 10mm wide, filled with sealing compound Grade 'B' complete all as specified and directed. Please Enable Macros to View BoQ information |
