Tender For Construction Of Security Control Room And annual rate contract Main Gate Roofing And Construction Of Heavy Duty Incinerator For Use In Technical Unit At annual rate contract Sarsawa Under Ge (Af) Sarsawa
Tender Value
39.46 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
4 days left
EMD
79000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sarsawa → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Security Control Room And annual rate contract Main Gate Roofing And Construction Of Heavy Duty Incinerator For Use In Technical Unit At annual rate contract Sarsawa Under Ge (Af) Sarsawa
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 10-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n.exc (not exceeding) 15 cm deep and getting out soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches for foundation etc not exc 1.5m wide and not exc 1.5 m in depth in any type of soil complete all as specified and directed. |
| 3 | Returning filling in including spreading levlling, watering and well ramming in layers nexc 25cm thick complete all as specified and directed. |
| 4 | Removal of excavated material to a distance nexc 50 m and depositing at a level nexc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Earth filling under floors including spreading, leveling, watering and well ramming in each layers not exc 25 cm thick complete all as specified and directed. Note: Soil obtained from excavation under relevant item here-in-before shall be used for filling.In case of extra filling contractor will bring the additional required'earth material' from out side the restricted area by its own arrangement and no extra payement will be done for the same. |
| 6 | M & L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and directed. |
| 7 | M & L for brick work sub class 'B' bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 8 | M & L for brick work sub class 'B' bricks, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed. |
| 9 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, of flat surface, rough finidshed complete all as specified and directed. |
| 10 | Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work n exc 200mm thick of flat surface, finished rough complete all as specified and directed. |
| 11 | Formwork to sides and soffits roof beams, lintels of flat surface, finished rough complete all as specified and directed. |
| 12 | Formwork as in chajjas flat finished rough complete all as specified and directed. |
| 13 | M & L for reinforced cement concrete (Nominal Mix) (using 12.5mm graded Agg) Type B0 1:2:4 as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 14 | Formwork to sides of pillars, posts,struts piers,columns and stanchions (square, rectangular, polygonal on plan) rough finished complete all as specified and directed. |
| 15 | M & L for reinforced cement concrete (Nominal Mix) (using 12.5mm graded Agg) Type B0 1:2:4 as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 16 | M & L for reinforced cement concrete (Nominal Mix) (using 12.5mm graded stone aggregarte) Type B-0 (1:2:4) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 17 | All as per Item No 16.00 here-in-above but in chajjas complete all as specified and directed. |
| 18 | M & L for reinforced cement concrete (1:2:4) (Nominal Mix) (using12.50mm graded stone aggregates) Type B-0 as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 19 | M & L for TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking bending spirally for hooping for columns hooking ends and binding with m.s wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 20 | All as per Item No 19.00 here-in-above but for exc 5mm dia and over upto and including 10mm dia in stirrups,spaces and binders complete all as specified and directed. |
| 21 | M & L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 22 | M & L for 100mm thick cement concrete type D-2, (1:4:8) (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 23 | S & F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 24 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished smooth and even without using extra cement complete all as specified and directed. |
| 25 | M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and incl. mixing water proofing @ 2% compound and finished fair and even without using extra cement complete all as specified and directed. |
| 26 | Supply only integral water proofing compound complete all as specified and directed. |
| 27 | M & L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar (1:3) and finished fair and even without using extra cement complete all as specified and directed. |
| 28 | M & L for preparation of new plastered surfaces of walls apply two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface at any height incuding necessary scaffolding complete all as specified and directed. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) / Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 29 | M & L for preparation of new plastered surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm at any height incuding necessary scaffolding over new/complete removal surfaces complete all as specified and directed.Note: (i) Primer and emulsion application to be carried out through air less spray machine (Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied). (ii) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application). Make: Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height incuding necessary scaffolding. |
| 30 | M & L for for preparation of new plastered surfaces of Ceiling apply two coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including priming coat a primer applied @ 0.90 litre/ 10 sqm on the surface at any height incuding necessary scaffolding complete all as specified and directed. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.Make: Asian Paints Royal (10 years product warranty) / Nerolac (10 years product warranty)/ Berger (10 years product warranty) at any height incuding necessary scaffolding. |
| 31 | M & L for exterior or interior waterproof/weather proof cement based 1 mm thick putty @ 1 Kg(undiluted) per sq mtr. on new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed.Step 1. Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2. Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. |
| 32 | M & L for 25mm thick cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles complete all as specified and directed. |
| 33 | M & L for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement tomatch the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed. |
| 34 | M & L for glazed ceramic coloured tiles in vertical surfacaes 350x250x7mm/ 450x350x7mm thick set set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar (1:4) and finished even and fair for receiving tiles complete all as specified and as directed. |
| 35 | M & L for Non-skid ceramic coloured tiles (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including screed bed or bedding layer 15 mm thick in cement mortar (1:4) for laying floor finishes complete all as specified and directed. |
| 36 | M & L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed. |
| 37 | M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 38 | M & L screed laid 15mm thick in cement mortar (1:4) as in roof over green concrete surface finished even and smooth using Liquid WPC complete all as specified and directed.Note: Liquid WPC will be measured and paid seperately. |
| 39 | M & L for providing cement concrete in type B-0 (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to (consolidated thickness 65mm or less) as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified and directed. |
| 40 | M & L for roof treatment using APP based polymeric membrane minimum weighing not less than 3kg/sqm black finish reinforced with non woven polyster matt with thermo finish (wt. not less than 150 gms/sqm) laid over compatible bitumen primer @0 .30 liters per sqm and bitumen 85/25 @ 1.20 Kg per Sqm with help of torching with a proplyne or a butane gas using torch with minimum overlap of 75mm at side and 100mm at ends and sealing including applying a coat of bitumen primer & bitumen 85/25 applied hot all as per manufacturer instructuions. For parapet in a groove (No separate payment will be made and measurement will be done for horizontal surfaces) including applying a coat of heat repallant bitumen aluminium paint @ 0 .1 liter per Sqm on topof treated surface of roof complete all as specified and directed. |
| 41 | M & L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 42 | M & L for 75 mm thick PCC (1:3:6), type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in plinth protection finished surfaces even and smooth without using extra cement and joint will be filled by mix of 85/25 bitumin and sand complete all as specified and directed. |
| 43 | M & L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.Note: Glazing/penelling measured and paid saperately in respective items. |
| 44 | S & F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc complete all as specified and directed. |
| 45 | S & F Prelaminated particle board 18/19mm thick, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to but prelaminated both side withdecorative choice lamination complete all as specified and directed. |
| 46 | M & L for Sheet glass, ordinary quality of any colour 5.50mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 47 | S & F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement complete all as specified and directed. |
| 48 | S & F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 49 | S & F 140mm Floor door stopper of aluminiumalloy body and tongue, anodised, with hard drawn steel spring,fixed in floor, but of brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 50 | M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 51 | S & F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 52 | S & F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed. |
| 53 | S & F 35 mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.Note: door shutter width not exc 0.85m with single shutter each door but door shutter width exc 0.85m two panel shutter each door without any extra cost. |
| 54 | M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 55 | M & L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed. |
| 56 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed. |
| 57 | S & F stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed. |
| 58 | S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed. |
| 59 | S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked complete all as specified and directed. |
| 60 | S & F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 61 | S & F 75 mm PVC floor trap with CP grating incl jointing to waste pipe incl fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 62 | S & F GI tubing in 20mm bore med grade with all fittings and fixed complete walls and ceilings or laid in floors complete all as specified and directed. |
| 63 | S & F GI tubing in 15mm bore med grade with all fittings and fixed complete walls and ceilings or laid in floors complete all as specified and directed. |
| 64 | S & F for 20 mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 65 | S & F bib taps 15mm dia Chromium Plated with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed. |
| 66 | S & F for PVC connections 45 cm Long incl 15mm bore fly nuts on both ends complete all as specified and directed. |
| 67 | S & F 500 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc all as specified in SSR Part-I complete all as specified and directed. |
| 68 | S & F for 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass and fixed complete all as specified and directed. |
| 69 | S & F in repair 450 x 600mm belevelled edge mirror 5mm thick of selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washer complete all as specified and directed. |
| 70 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 71 | S & F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 72 | S & F vitreous china table top basin size 450 x 525 x 195 mm shape oval of Jaquar or equivalent of PARRYWARE / MARC / KINGSTON / SOMANY / ESS ESS / SIECO / KOHLER / HINDWARE / PRAYAG / PARKO including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed. |
| 73 | S & F 15mm dia tall basin/swan neck tap cast copper alloy with capasten head chromium plated screwed down high pressure with or with lettered hot and cold with long screwed shanks and fly nutscomplete all as specified and directed. |
| 74 | S & F vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified and directed. Make: “Cardiff Range” of Parryware equivalent of M/S Johnson, H & R India Ltd / M/S Hindustan sanitary ware and Industries Ltd / CERA, Madhusudan Ceramic as approved by GE. |
| 75 | M & L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 76 | M & L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand compelete all as specified and directed |
| 77 | M & L for PCC Type C-2 (1:3:6) (using 40 mm graded stone aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified and directed. |
| 78 | Supply and laying salt glazed stone ware drain pipe 150mm internal dia conforming to IS laid in trenches and joinged in cement mortar (1:2) completed all as specified and directed. |
| 79 | M & L concreted bed to drain pipes in PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against the sided of pipe after they are laid in slop and tested for 150mm bore sewer line complete all as specified and directed. |
| 80 | M & L for RCC (1:2:4) type B-1 (using 20mm graded mechanically crushed stone aggregate) as in precast manhole covers, septic tank etc and set in cement mortar (1:4) complete all as specified and directed. |
| 81 | S & F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls/spout pipes including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed. |
| 82 | All as per Item No 82.00here-in-above but for floors complete all as specified and directed. |
| 83 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/laid in trenches including removing the old pipes and making good the disturbed surface as per existing complete all as specified and directed. |
| 84 | S & F 110mm PVC(SWR) bends any radius, with/without oval access door, complete all as specified and directed. |
| 85 | M & L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 86 | M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted bolted or welded attachment Fe-290 Gde E-165 etc complete all as specified and directed. |
| 87 | M & L Pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet ( Oval /curve shape) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 88 | M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 89 | M & L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) (using 20 mm graded stone aggregate) complete all as specified and directed. |
| 90 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 91 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 92 | S & F mild steel round bars 10mm dia 7 over Fe -410-W (Gde E-250) quality-A or Fe 290(Gde-E-165)10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 93 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section confirming to Fe-290 with gusset plate , rails braces etc. complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or slinding with and including either hooks hinges and rollers for slinding gates, guide rail of MS flat and framing required for fixing of rollers, pintle hinges, locking arrangement as required and hanging also fastening and fixing complete using Fe- 290 (Gde E-165) quality 'A' complete all as specified and directed. |
| 94 | S & F of MS Plates Fe-410 W (Gde E-250 quality-B) (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 95 | Site clearence |
| 96 | M & L for concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled Modular type sunken boxes including earth dolly with modular cover plate with frame of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings:-One light / fan point controlled by one way switch |
| 97 | All as per Item No 97.00 here-in-above but for One 5 Amp socket outlet on independent board complete all as specified and directed. |
| 98 | All as per Item No 97.00 here-in-above but for One 5 Amp socket outlet on same board complete all as specified and directed. |
| 99 | All as per Item No 97.00 here-in-above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and directed. |
| 100 | S & F socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed. |
| 101 | S & F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed. |
| 102 | S & F switch 6 amps modular type one one way complete all as specified and directed. |
| 103 | S & F switch 16 amps modular type one one way complete all as specified and directed. |
| 104 | S & F lamp holder bakelite type polycarbonate with back plate suitable for batten fittings complete all as specified and directed. |
| 105 | S & F ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and directed. |
| 106 | S & F of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length. |
| 107 | S & F sheet metal enclosure double door concealed suitable for SPN distribution boards when MCB to be used having 200 Amp rated bus bar 12 ways 240 V including fixing in new location with connection of circuit and submain as per site requirement complete all as specified and directed. Note: (a) MCBs are to be measured and paid seperately. (b) Make of MCBs and DB should be same. |
| 108 | S & F 240V, 10KA, 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCb DB complete with connection testing and commissioning complete all as specified and directed. |
| 109 | S & F SPN 40 to 63 AMP rating, 240V, 10KA, 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCb DB complete with connection testing and commissioning complete all as specified and directed. |
| 110 | S & F of modular fan regulator, step type, 120 V, 2 module complete all as specified and directed. |
| 111 | S & F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFN with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 112 | S & F Earthing to DBs with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead 4.0 sqmm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule Pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete all as specified and directed. |
| 113 | M & L for Earth continuity conductor or main earthing lead of 4.0 mm galvanized iron wire, buried in ground or fixed to wall in and including 15 mm bore GI pipe medium grade for protection of earth wire complete all as specified and directed. |
| 114 | S & F enviroment friendly,ultra modern,energy saving surface mounted decorative 10 Watt LED bulkhead fitting modular type with polycarbonate housing ,high efficient LEDs with opal diffuser and IP65 protectio, lumen efficacy 85 lm/watt with colour temerature 4000K/3500K, THD≤ 20 CRI>80,2.5 kV surge protection all as specified and directed. |
| 115 | S & F enviroment friendly indoor decorative 20 Watt LED Polycarbonate Batten to provide light in three different colours cool white, Neutral white and warm whitewith the help of switch in same batten with opal diffuser , operating voltage range 140 v to 270 V, Driver efficiency 88%, lumen efficiency =100 lm/watt , THD≤ 20 CRI>80 , inbuilt surge protection = 2.5 Kv, with zero mercury content including all accessaries all as specified and directed. |
| 116 | S & F in replacement enviroment friendly recess/pendent mounting 36 watt LED flat panel 2'x2' fabricated CRCA sheet steel duly powder coated housing cool white with high efficient LEDs & glare free opal diffuser PF>0.95 , lumen efficacy>100 lm/W, THD<10% operating range 220v to 240V,CRI>80, Colour Temerature 3500 K (Warm White) including connection with existing wire and all accessaries all as specified and directed. |
| 117 | S & F modular type AC box 3 module operated with 20 Amp single pole MCB including 15 amp modular socket concealed in wall complete all as specified and directed. |
| 118 | S & F exhaust fan, steel body AC single phase 230V of size 300 mm sweep with 1400 RPM, blades and frame and louver complete with making arrangement for fixing of exhaust fan on steel/ almunimum frame window/making opening in brick wall as per site requirement and also making good to disturbed surfaces as per matching to existing complete all as specified and directed. |
| 119 | Supply and laying UG cable in trenches/ passing through pipes/ fixed on wall or poles cable XLPE insulated, screened PVC bedded, steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with standard aluminum conductor of size 3.5 core, 35 sqmm with suitable cable gland complete all as specified and directed. |
| 120 | Supply, installation, testing and commissioning of 4 pole, MCCB of 100 Amps rating, suitable for 415 volts, 50 Hz AC supply, having a minium short circuit breaking capacity of 25 kA, conforming to IS/IEC standards. The MCCB shall be of thermal-magnetic type with adjustable overload and short circuit protection, complete with the line and load terminals, spreader links, and all internal accessories. The MCCB shall be housed in a fabricated steel metal enclouser, owder coated, dust and vermin proof, suitable for wall mounting, and with hinged door, locking arrangmens, gland plate, earthing studs and adequate space for cable termination. The work includes fixing the enclousres on wall/ structure making all necessary connections with suitable lugs, glands, hardware and earthing complete in all respect complete all as specified and directed. |
| 121 | M & L for filling dry sand river cushnioning for under ground cables complete all as specified and directed.Note: For the measurement purpose only punned thickness shall be measured and paid. |
| 122 | M & L for common burnt clay bricks, sub class 'B' grade laid in trenches for protection of UG cables perpendicular to the designation of size 230x115x75mm complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender