Tender For Special Repairs To Mes Installation At Dronachal
Tender Value
47.79 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Mes Installation At Dronachal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description . |
| 2 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete or masonary. |
| 3 | Dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete |
| 4 | Demolition of brick work , or any type built in Cement mortar including all quoins, arches, pillars etc |
| 5 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed . |
| 7 | Dismantling or removal of settled Bricks/ Interlocking block any thickness (laid flat or on edge) or brick tiles in path, floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointed complete all as specified and directed |
| 8 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, posts, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. complete all spd and directed. |
| 9 | S&F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 10 | S&F for MS posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 11 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 12 | M&L PCC 1:3:6 Type C2 40 mm graded stone aggregate in foundation, filling and mass concrete as in boundary pillars and post etc all as specified and directed. |
| 13 | MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 |
| 14 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 15 | Fixing only new chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 16 | S&F Mild steel round bars 10mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and welding with flats of chain link fencing Fe 410W (Gde E-250 ) quality -A or FE-290 (Gde E-165) complete all as specified . |
| 17 | S&F, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed |
| 18 | M&L brickwork with flyash old size bricks built in CM 1:6 straight or curved on plan exe 6 m mean radious complete al las specified and directed. |
| 19 | M&L for Brick work with Fly ash brick straight or curved on plan exc 6 m mean radius, buit in cm 1:6 as specified and directed |
| 20 | Supply only integral water proofing compound of approved make complete all as specified and as directed |
| 21 | Rendering 10 mm thick in CM(1:4) on fair faces of bricks or concrete surface finished even smoth without extra cement etc complete all as specified. |
| 22 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 23 | M&L 15mm thick rendering in CM 1:6 on other than fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 24 | M&L 15 mm thick rendering, in two layers (10+5mm) first layer in Cement mortar 1:6 and second layer with cement mortar 1:4 using WPC as per manufacturers instructions on fair faces of brick work or concrete surfaces finished smooth and even without using extra cement . |
| 25 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed |
| 26 | S&F Plain 0.71mm thick Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) |
| 27 | M & L cement concrete 1:3:6 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified. |
| 28 | S&F for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment. |
| 29 | Fixing only of Brick/ Interlocking blocks any thickness as in pathway or hardstanding (except tiles) over sand cushioing etc complete all as specified and directed |
| 30 | M&L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete |
| 31 | M&L for Cement concrete 100 mm thick type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all all as specified and directed |
| 32 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 33 | Material and labour for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 34 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 35 | M&L 25mm thick cement concrete type B-1 1:2:4 (20 mm graded aggregated) in flooring Complete all as specified and directed |
| 36 | M&L Screed bed or beding layer of mortar 15 mm thick for laying floor finish in CM 1:4 Complete all as specified and directed |
| 37 | M&L for Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of CM 1:3, 20mm thick for laying floor finishes. |
| 38 | M&L for Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing set in CM 1:3, 20mm thick |
| 39 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out |
| 40 | M&L cement concrete 1:4:8 type D-2 40mm graded stone aggregate in foundation, filling and mass concrete etc as specified and directed. |
| 41 | M & L cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in floors and plinth protection otr in similar wk finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 42 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed. |
| 43 | All as per item No 42.00 above but 6 to 8mm dia in stirrups, spacers and binders all as specified and directed. |
| 44 | M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, roof beam, lintel beam etc; and similar work; vertical or to batter with rough finished surface |
| 45 | M & L Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular in plan to provide rough finish surface to concrete |
| 46 | M&L for Reinforced cement concrete (Design Mix) Type M 25 (20 mm graded aggregate)in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed |
| 47 | M&L Reinforced cement concrete (Design mix) Type M 25 (20 mm graded aggregate)in Columns , pillars ,Piers ,Posts and struts complete all as specified and directed |
| 48 | Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m |
| 49 | Making good under cills, jambs or over arches, lintels and bressummers. including all pinning where necessary in cement mortar 1:4 complete |
| 50 | M&L for preparation of new iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 51 | M&L for preparation of new iron surfaces of any description nexc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 52 | M&L for preparing of new plastered surface and applying three coats of white wash in ceiling |
| 53 | M & L for applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 54 | M & L Preparation of new plastered surface wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 55 | S&F Power Coated aluminium frame/shutter for doors, windows, ventilators or partition with one or more rebates including joining cleat, glazing clips, channel etc for fixing etc. complete all as specified and directed. |
| 56 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge. |
| 57 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames. |
| 58 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 59 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 60 | S&F for 150 mm aluminium handles, cast type, anodised complete all as specified. |
| 61 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified. |
| 62 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 63 | S&F 200mm long aluminium alloy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 64 | S&F for 100mm Stainless steel butt hinges complete all as specified and directed. |
| 65 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls as directed. |
| 66 | M&L granite 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shabe or granite complete. |
| 67 | S&F for 450mm dia Reinforced concrete pipes, class NP-3, laid and jointed complete with collers complete all as specified. |
| 68 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan (including getting out and disposal of excavated earth lead upto 50 mtr and and lift upto 1.5 m, as directed by Engr-in-Charge. |
| 69 | M &L for approved earth filling with approved including excavation and soil brought from out side MD land n exc 15 km , filling in trenches or paving laid in layers not exceeding 25 cm thick spread, levelled and rammed with power roller 8-10 tonne including watering etc complete all as specified and directed. |
| 70 | Rolling and consolidating formation surfaces in cuttingonly with power roller 8-10 tone including filling in hollows and depression which occur during the process of of rolling complete as specified. |
| 71 | M & L for preparing new plastered surface of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and as directed. |
| 72 | Removal excavation material not exceeding 50 mtr and depositing where directed. |
| 73 | XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (Heavy duty) with aluminium conductor, 11000 Volts Earthed grade cross section area 120 Sq mm 3 Core |
| 74 | Excavation or road cutting in trenches not exc 1.5m wide and not exc 1.5M depth for laying of cable, getting out including forming bottom surface to required level and gradient in hard/dense soil.complete all as specified and directed. |
| 75 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in hard/dense soil. complete all as specified and directed. |
| 76 | Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and directed. |
| 77 | Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.Note : Punned thickness only shall be measured and paid. |
| 78 | M & L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified. |
| 79 | Cable Joint Kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm |
| 80 | Cable Joint Kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm |
| 81 | Cable Joint Kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm to 185 Sqmm |
| 82 | Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc ) and making good disturbed surfaces of walls, floor etc. |
| 83 | Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. |
| 84 | Taking down old unsv light fitting,Security light ,bulb of any size and make from the site and making good surface complete all as specified and directed. |
| 85 | M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed |
| 86 | One light/Ceiling fan/Exhaust fan point controlled by one switch. |
| 87 | One 3 pin socket outlet on same board. |
| 88 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 89 | -ditto- as above item No 85.03 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 90 | M&L for power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete (socket and switches to be measured and paid separately) |
| 91 | Supply and Fix in repair of modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 92 | Supply and Fix in repair of modular socket single pole one way 6 Amp-2/3/5 pin, 2 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 93 | Supply and Fix in repair of modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 94 | Supply and Fix in repair of modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 95 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all specified and directed by EIC. |
| 96 | S & F in repair of 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span. |
| 97 | S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body |
| 98 | Material & Labour for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge. |
| 99 | Supply, installation, testing and commissioning of factory-fabricated 2 Way TPN Distribution Board, suitable for 230 Volts, 50 Hz AC supply, conforming to relevant IS standards, made out of sheet steel enclosure of minimum 1.6 mm thickness, dust and vermin proof, duly phosphated and powder-coated, complete with hinged lockable door.The distribution board shall be provided with one number double pole (DP) MCB / isolator of required rating as incomer (32 AMP) and Three numbers single pole (SP) MCBs of suitable ratings as outgoing(10 amp & 20 Amp) 10 kA breaking capacity.The DB shall include copper neutral bar and earth bar, internal wiring with VC insulated copper conductors, proper interconnections, labeling, earthing, fixing accessories, mounting on wall/pole (surface/flush) as directed, complete with testing and commissioning, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender