Tender For Addn Altn Of Bathroom At Drona Complex And Provn Of View Cutter And Allied Work At Scgr Complex Under Ge Dronachal
Tender Value
19.22 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
39000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn Altn Of Bathroom At Drona Complex And Provn Of View Cutter And Allied Work At Scgr Complex Under Ge Dronachal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches in Soft Disintegrated Rocks, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and as directed by Engineer-in-Charge |
| 2 | Ditto as in Item Above but depth Exceeding 1.50 Mtr |
| 3 | Cement concrete of Type D2 1:4:8 (40mm Graded Aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge |
| 4 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as direected by Engineer in Charge |
| 5 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as direected by Engineer in Charge |
| 6 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and as direected by Engineer in Charge |
| 7 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as direected by Engineer in Charge |
| 8 | Reinforced cement concrete (design mix) of M-25 Grade (20 mm Graded Aggregate) as in Chajjas or in shelves and the like complete all as specified and as direected by Engineer in Charge |
| 9 | Material and Labour to Fair Finished Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed by Engineer-in-Charge |
| 10 | Material and Labour to Fair Finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) → complete all as specified and as directed by Engineer-in-Charge |
| 11 | Material and Labour to Fair Finished Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed by Engineer-in-Charge |
| 12 | Material and Labour to Fair Finished Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed by Engineer-in-Charge |
| 13 | Material and Labour to Fair Finished Formwork to edges of concrete, flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed by Engineer-inCharge |
| 14 | Material and Labour to Fair Finished Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed by Engineer-in-Charge |
| 15 | S & F for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as directed. |
| 16 | Ditto As above but in Stirrups |
| 17 | Material and Labour for Hardcore of Broken Stones and Boulders, gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed By Engineer-in-Charge |
| 18 | Material and Labour for Cement concrete type C- 2, 1:3:6 (40mm graded aggregate), 100 mm Concrete complete all as specified and as directed By Engineer-in-Charge |
| 19 | Supply and Fix 12 mm thick Toughned Glass as in Hinged Doors, Partitions, Automatic Doors and Similar work including cutting to Shape Drilling Holes required including necessary stainless steel fittings like Handles of size 300 mm Long including fixing to wall and floor using Soild Heavy SS Clips and other connecting items necessary for proper functioning of door complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply and Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Returning, filling in soft disintegrated rocks including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed by Engineer-in-Charge |
| 22 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed |
| 23 | M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed |
| 24 | Cutting opening in cement concrete/Brick Masonary walls with or without reinforcement (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. |
| 25 | Demolition of Brickwork or Stone Boulder Masonary, Bulit in Cement Mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engnr-in-Charge |
| 26 | M & L for brickwork with Fly ash Bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge |
| 27 | M & L for brickwork with sub-class `B` bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 28 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick/ concrete surfaces finished fair and even without using extra cement complete all as specified and directed. |
| 29 | M&L 15 mm (5mm in CM 1:4 with WPC +10mm in CM 1:6 ) thick in two layers rendering in cm 1:4 on fair aces of bricks walls surface finished even and smooth without using extra cement including water proofing compound all as specified and directed. (Water proofing compound measured and paid seperately) |
| 30 | M&L 10 mm thick rendering in CM 1:3 in ceiling on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement. |
| 31 | M&L for Preparation of New Plastered surfaces of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 32 | M&L for prepration of new ceiling surfaces , applying two coat of oil emulsion distemper including one coat of white cement based Putty, all as specified and directed by Engr-in-Charge. |
| 33 | Material and Labour for Preparation of New Surfaces Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm over external Surface Putty one coat complete all as specified and as directed by Engineer-in-Charge |
| 34 | M&L complete removal of existing Treatment old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and including one coat of white cement based putty (where it is required) all as specified and directed by Engr-in-Charge. |
| 35 | M&L for prepration of old ceiling surfaces , applying two coat of oil emulsion Distemper including White Cement Based Putty, all as specified and directed by Engr-in-Charge. |
| 36 | Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note;- water proofing compound shall be measured and paid separately as supply only) |
| 37 | M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately. |
| 38 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 39 | Note : It is hereby mentioned that the contractor has to ensure the proper upkeep of the existing Tile Flooring/ Cupboards/Glass Doors Etc. Contractor is supposed to make his own arrangements like POP on floors Etc or any other suitable arrangements to make sure the safety of these Items. Contractor will bear the cost of repairing cracks (Made by the workers during construction) on the existing structure. |
| 40 | M&L Vitrified Glazed tiles Glossy Finish or Digital Tiles Super Gloss in vertical surface Area of Wall tiles Exceeding 0.36 Sqm and not Exceeding 0.76 Sqm), 8 mm thick with 05 mm wide spacers and filled with Epoxy Grout of Approved Make, set and jointed in neat cement slurry or over 10mm thick CM (1:4) as in backing coat complete all as specified and directed. |
| 41 | M & L for Vitrified tiles of Dark Shade or Digital Gloss Finish, 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc with 05 mm wide spacers and filled with Epoxy Grout of Approved Make, set and jointed in neat cement slurry or screed bed 15cm in CM (1:6) complete all as specified and directed. |
| 42 | M&L Granite of 20 mm thick (of any type and colour) work (table rubbed/grinding/ moulding and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin counter and like over and including 20 mm screed bed in CM 1:3 all as specified and directed. |
| 43 | Providing edge moulding to 18-20mm thick Granite Stone of any Type stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 44 | Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps complete all as specified and directed. of the following bore of pipe:- |
| 45 | (a) 110mm |
| 46 | (b) 75mm |
| 47 | Supply & fixing PVC (SWR) junction single (single `T') equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 48 | (a) 75mm |
| 49 | (b) 110mm |
| 50 | Supply & fixing PVC (SWR) PVC (SWR) vent cowl inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 51 | (a) 75mm |
| 52 | (b) 110mm |
| 53 | Supply & fixing PVC (SWR) double (double Y) equal or unequal with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 54 | (a) 75mm |
| 55 | (b) 110mm |
| 56 | Supply & fixing in repair PVC (SWR) pipe bend with accessable door inculding cutting out wall /concrete and finishing of surface to match existing surface complete all as specified and as directed of the following bore:- |
| 57 | (a) 75mm |
| 58 | (b) 110mm |
| 59 | M & L for 100/110 mm bore PVC (SWR) floor trap/ Multi trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge |
| 60 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 61 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 20 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 62 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 63 | Supplying and laying of CPVC pipes SDR 11 of outer diameter 25 mm & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all inclding concealed pipes whereven necessary complete all as specified. |
| 64 | S&F 20mm bore gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed. |
| 65 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 66 | S&F Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass.complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area of Window not exceeding 1.00 sqm each |
| 67 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge |
| 68 | Taking down and refixing shutters of any description exc 1 sqm but n.exc 2 sqm all as specified and directed by Engr-in-Charge. |
| 69 | M&L for cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frame of pressed Steel and bed blocks and like etc complete all as specifed and directed |
| 70 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S& F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 72 | S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 73 | S&F for 150 mm aluminium handles fancy type, cast type, anodised complete all as specified. |
| 74 | S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section, fancy type complete all as specified. |
| 75 | S&F 300mm long aluminium allooy anodised sliding door bolts with hasp and staple (bolt type) & fixing clip of sheet cast or extruded section & fixing bolt & sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 76 | S&F for 100mm Mild steel butt hinge complete all as specified and directed. |
| 77 | S&F new single action spring hinge, 125mm size, mild steel with steel wire spring, stove enameled black fixed to angle iron door frame by welding complete all as specified and directed. |
| 78 | S&F Sheet glass 4 mm thick exc 0.5 sqm in each pane fixed in aluminium/wooden frame using oil putty complete all as specified and directed by Engr in charge. |
| 79 | S&F 4.0 mm thick figured glass, pin headed type and glazed oil putty in square not 0.50 sqm in each pane complete all as specified and directed by Engr in charge. |
| 80 | Anodised aluminium snap grid frame work for false ceiling all as specified including Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge |
| 81 | S & F in Repair, Counter top Ceramic Wash Basin of Make Jaquar (ALS-WHT-85601) of size 705x460x195 mm or equivalent including, Suitable Waste Coupling for this make, Supply and Fix in Repair Bottle Trap of PTMT bottle traps of Dia 32 mm, for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, Including PVC connections 15 mm size with PTMT nuts of length 600 mm, including waste pipe complete all as specified and as specified and as directed by Engnr-in-Charge |
| 82 | S & F in Repair, Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm 45 gms/40 mm-60 gms), Bore dia of only fixed in discharge pipe (mm) |
| 83 | S&F in repair 15 mm wash basin mixer of make Jaquar (LYR-CHR-38051B) Single Lever Basin Mixer with Popup Waste & 450mm Long Braided Hoses including all the necessary accessories required for fixing the mixer, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specified and directed by engr in charge. |
| 84 | S&F in repairs Wall Mixer 3-in-1 System of Jaquar Make CQT-CHR-23273UPR Wall Mixer with Provision for overhead Shower with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges Connecting Legs & Flanges (without Hand Shower but with Exposed Shower Pipe with Provision for Simultaneous Working of Showers with Operating Diverter Knob, L-Type in Round Shape 20mm dia., Size 1120X410mm with Sliding Holder for Hand Shower, Wall Bracket & 8mm dia., 0.5M Long Flexible Tube (for connection to Exposed Shower Mixer) Without Showers & Overhead Shower)15 mm wall mixer with provision for bath telephone shower and overhead shower cast copper alloy, chromium plated fancy type, with capstan head, screwed down high pressure for iron pipe etc and fixed complete all as specfied and directed. |
| 85 | S & F 15 mm nominal size, nonrising spindle type fancy wall mounting combination as per IS 8931: 1993, cast copper alloy body with knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 86 | S & F in Repair ISI marked 15mm bore concealed stop cock ORP SSF 10083KPM/Exposed Angle Cock ORP-SSF-10053PM cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 87 | Supply and Fix Wall Mounted Cabinet: 580 x 480 x 480 mm, Marble Top Platform: 490 x 600 mm Cat. No. S9510385WH, Mirror with frame: 500 x 700 mm Cat. No. B3510935 of Make Cera (Valorosa Vanity Cabinets & Mirrors) all as specified and as directed by Engineer-in-Charge |
| 88 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC of make Jaquar and Catalogue No ACS-WHT-87953BIUFSM of colour approved by user, including Rimless Blind Installation Wall Hung WC Including UF Soft Close Slim Seat Cover, Hinges, Accessories Set (closed pattern incl all necessary accessories like rag bolts/ gel gasket Including Traps and all other accessories required for effective functioing of EWC. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 89 | Supply and Fixing in Mechanical Concealed Cistern of Suitable Capacity with Frame along with all the accessories like P Trap or S Trap Pipe, Connection Hanger, Protection Cap Adapter Sleeve Including Mechanical Push Plates of Jaquar Make Catalogue No JCP-CHR-852415 (Control Plate Alive) , Suitable Flush Pipe to connect with EWC Etc and PVC connection 450 mm long. complete all as specified and as directed by the Engineer-in-Charge |
| 90 | Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge |
| 91 | S&F in repairs PVC (SWR) floor trap, plain with grating (Grating will be decided by the user from catalogue of approved make/Jaquar) including jointing with solvent cement of outer outlet dia of 75 mm, complete all as specified and as directed by Engnr-in-Charge. |
| 92 | S&F in repir Health faucet (ABS Body) of Jaquar Make and catalogue No ALD-CHR-579, mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook Easy Flex Tube & Wall Hook with NRV (Back Flow Preventer) including making connections and fixed in position complete in all respect as specified including Health faucet fixing in pipe etc. complete all as specified and as directed. |
| 93 | S&F in repair of Toilet paper holder of Jaquar Make and Catalogue No ACN-CHR-1151N chromium plated, fixing complete all as specified and directed by engr in charge. Make: Prayag or equivalent |
| 94 | S & F in repairs Swivel shower of Jaquar Make and Catalogue No OHS-1637 Maze Overhead Shower 190X295mm Rectangular Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms including fixing to steel pipe or union complete all as specified and as directed. |
| 95 | Supply and Fix SELFY (1600 x 200 mm) Shower Panel of Jaquar Make and Catalogue No SHP-SSF-ST88158B With Anti Finger Print In Stainless Steel Body Anti-finger print stainless steel body inluding Inbuilt ABS top shower with 60 nozzles, inclding 2 Moveable ABS body massage jet, including Hand shower with flexible hose including Brass Spout inclding Shelf inclduing Thermostatic mixer with diverter 40 cm stainless steel braided hose and other accessories for effective functioning of unit for the intended purpose complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Supply and Fix Glass Shelf of Jaquar Make Catalogue No ACN-CHR-1171N fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and as directed by Engineer in Charge. |
| 97 | S & F Aluminium Anodised Tubular towel Rack of Jaquar Make ACN-CHR-1181S, Towel Rack 600 mm Long with Lower Hangers, Stainless Steel complete all as specified and as directed by the Engineer-in-Charge |
| 98 | Supply and Fix Towel Ring of Jaquar Make ACN-CHR-1121N fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-Charge |
| 99 | Supply and Fix Double Arm Wall Mounted Reversible Plain/ Magnifying (3X) Pivotal Mirror of Jaquar Make ACN-CHR-1193N on locations as specified and as directed by Engineer-in-Charge. |
| 100 | Supply and fixing for ISI marked 15 mm bore, fancy type Two way bib tap (For Health Faucet Connection) of cast copper alloy and Chromium Plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by the Engineer-in-Charge. |
| 101 | Supply and Fix in Repair Bottle trap of Jaquar Make and Catalogue No ALD-CHR-769L300X190 Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange including all other anecessary accesories having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and as directed. |
| 102 | Material and Labour for Bathtub (Combi System) of size 1800X1100X470 mm with PMMA Sheet PU Green reinforcement, SS Frame, level sensor, safety vaccum breaker keypad control verflow with drain and filter water pump 1.4HP slim water Jets -8 Back Jets-4 0.9 HP Air blower, air jets 16, air regulator, disinfection headrests, chromotherapy and fixed with necessary fixing arrangements complete all as specified and directed. Make Jaquar Cat No JWP-WHT-KUBIXPM180CX (Combi System) or equivalent in Hindware /Cera as approved by GE. |
| 103 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 104 | M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified & directed. |
| 105 | Demoltion of Reinforced Cement Concrete of any Description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge |
| 106 | S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cylinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed |
| 107 | Earth work in excavation by mechanical means (Hydraulic excavator)/ in Ordinary Rocks foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed by Engineer-in-Charge |
| 108 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete. |
| 109 | Material & labour brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 110 | Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping above Boundary Wall and including necessary form work finishing exposed surface complete all as specified and directed. |
| 111 | Material & labour for plastering 10 mm thick on brick walls masonary as fair face of cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified and directed by Engineer in Charge |
| 112 | Returning refilling spreading levelling in layers with available soil in layers n exc 25 cm thick watered and well rammed . |
| 113 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as directed above the starting point . |
| 114 | Supply & fixing mild steel angle iron posts and struts in fencing, steel gate frame including handmade hinges etc. including cutting top to shape as directed drilling holes welding and notching for wire etc and flat iron fillets for securing wire mesh including bedding or riveting etc conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 115 | Material & labour preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed. |
| 116 | M&L RCC M-20 grade for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as directed. |
| 117 | Material and Labour for Fibre glass reinforced translucent Plain sheeting of minimum thickness 02 mm, with adequate lap (comparable to two corrugations side lap) fixed with L-type or J-type or cranked hook bolts in lieu of screw complete all as specified and as directed by Engineer-in-Charge |
| 118 | Providing and fixing factory made 04 mm thick Mild Steel Sheet of Specification as per IS 2062 Structural Grade solid CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades and fixing on M.S (mild steel) frame using Fasteners or Welds and screws, placed at grid made at 1.0 x 1.0 or as per requirement at site , all complete as per direction of Engineer-In-Charge. (CNC Laser Cut Sheets will be weighed at Site for the Payment Purpose) |
| 119 | Providing & fixing of factory made Fiberglass Reinforced Plastics (FRP) “CHAJJA”- 4mm thick of “Fibreways” brand or equivalent in required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos. vertically and 1 nos. horizontally 50x2mm thick M.S. Flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS: 11551 complete with protective Gelcoat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight, complete all as specified and as directed by Engineer-in-Charge |
| 120 | Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth and getting out in any type of soil by using of mechincal plant or chisel cutting for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 SQM on plan complete all as specified and directed. |
| 121 | Demolition and breaking up drain pipes, soil , waste and pipes etc (RCC/ SWG/CI etc) PCC bed concrete of any description in trenches or floors, including connections and fittings all as specified and as directed of following bore size . |
| 122 | (a) 150mm |
| 123 | (b ) 200mm |
| 124 | Demolition of cement concrete in any floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed. |
| 125 | Material & labour for concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. Note:-Thickness of bed below the barrel of pipes: 10cm for pipes 100 mm and 150mm dia &15cm for pipes 200mm dia and over. |
| 126 | (a) 200mm |
| 127 | S& F 200 mm internal dia reinforced concrete pipes class NP-2 laid and jointed complete with collars complete all as specified and directed. |
| 128 | Material & labour PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching ,kersbs compelet all as specified and directed. |
| 129 | Material & labour for PCC (1:4:8) type D-2 using 40 mm graded aggregate as in foundation filling & mass concrete complete all as specified and directed. |
| 130 | Material & labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles and including necessary form work finishing exposed surface complete all as specified and directed. |
| 131 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including foRMs, moulds,stopped ends complete all as specified and directed. |
| 132 | M&L for point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and its also including various sizes of module plates in gray colour also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly complete all as speccified and as directed by EIC. |
| 133 | One light/Exhaust fan point controlled by one switch. |
| 134 | One 3 pin socket outlet on same board. |
| 135 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 136 | -ditto- as above item no.119.03 but copper conductor 2.5 sqmm for 15 amp socket outlet. |
| 137 | S & F modular switch single pole one way 6 Amps, 1 module ISI marked complete all as specified and directed by EIC. |
| 138 | S & F modular socket single pole one way 6 Amp-2/3 pin, 2 module ISI marked complete all as specified and directed by EIC. |
| 139 | S & F modular switch single pole one way 16 Amps, 1 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 140 | S & F modular socket single pole one way 16 Amp-2/3 PIN, 2 module ISI marked complete all as specified and directed by Engr-in-charge. |
| 141 | S & F MCB Protected Socket 20 Amps, PVC Plastic Base (white) with Plug top & MCB SP 20 amps complete all as specified and directed. |
| 142 | Supplying, installing, testing & commissioning, storage water heater 25 litres capacity, as per IS 2082 (five-star rated as per BEE), reheating time less than 60 minutes, mixing factor less than 20%, shock proof high density PUF insulation body material, glass lined inner tank material having warranty 7 years on tank material, 3 years on heating element and 2 years on other spares parts comprising following fittings and 2 year product warranty with temerature control knob (a) glass coated incoloy element (b) capillary type thermostat (c) Pressure saftey valve (d) thermal cutout (e) multifunction valve (f) earth leakage circuit breaker (g) magnesium anode rod cathodic protection (h) flexible cable of suitable length with 3-pin plug of 16 A capacity (i) drain plug (j) digital display for all mentioned parameters (k) fusible plug fitted on the crown of water heater with max temprature 75 and 8 bar pressure including fixing by grouting and fastener complete all as specified and as directed by EIC. |
| 143 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 150 mm complete all specified and directed by EIC. |
| 144 | S & F LED batten luminaire surface/wall mounted ,4 feet 20 Watts comprise of aluminium extruded with anodised with powder coated in white colour with decorative end cap. The luminare is pre-wired with high efficiency electronic driver, with lifetime of 50000 burning hours . CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6000 to 6500K, surge protection DM-4KV & CM-3KV, IP-40 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 140 to 300 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 lm/w, filiker free and including connecting up with PVC sheathed suitable size copper conductor with push type cable connector 2/3 pin cable connector from ceiling rose to fitting fixed with 2 years of replacement warranty on fittings complete all as specified and directed by EIC. |
| 145 | S & F 12 W LED Recess/surface mounted downlighter (squrae/round shape) with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC. |
| 146 | S&F decorative type wall mounted luminaire with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base, complete all as directed. |
| 147 | S & F Crystal indian round LED wall mounting mirror (in round shape) with touch sensor of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers compelete all as directed by EIC. |
| 148 | S & F mirror light focus type , fixture 3 light, stainess steel crome acrylic wall light 230 V complete all specified and directed by EIC. |
| 149 | S & F ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body complete all as specified and directed by EIC |
| 150 | Supply and laying, fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm nominal cross section in service connections complete all as specified and directed by EIC. |
| 151 | M&L for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by EIC. Note: Three runs of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. |
| 152 | Supplying and fixing SPN DB 6 way, double door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required complete all as specified and directed by EIC. |
| 153 | Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete all as specified and directed by EIC. |
| 154 | Single pole and neutral |
| 155 | Single pole Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender