Tender For Provision Of Guard Room A1 6 Plus1 Including Rwh With Toilet Near Post No 4 At Fd Hosp Under Age I Bhalra
Tender Value
27.43 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
3 days left
EMD
54870
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
AGE (I) Bhalra → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Guard Room A1 6 Plus1 Including Rwh With Toilet Near Post No 4 At Fd Hosp Under Age I Bhalra
BOQ
| Sl. No. | Item Description |
| 1 | BUILDING |
| 2 | Excavation over areas not exc 1.50m deep and getting out in any type of soil.by mechanical means including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed. |
| 3 | All as per srl item No. 1.01 here-in-before but exc. 1.5 m and not exc. 3.0 m complete all as specified and directed. |
| 4 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts not exc. 10 Sqm on plan and not exc. 1.5m in depth and getting out in any type of soil, complete all as specified and directed. |
| 5 | Hardcore of guage exc 63 mm but not exc. 100 mm deposited spread and levelled in layers not exc. 15 cm thick watered and rolled/rammed to a true surface with broken bricks, complete all as specified and directed. |
| 6 | Cement concrete in foundation filling and mass concrete type D-2, 1:4:8 (40 mm graded crushed stone aggregate), complete all as specified and directed. |
| 7 | RCC M-25 Design mix as in foundations including raft footing, foundation beam and plinth beam, bases of column, complete all as specified and directed. |
| 8 | RCC M-25 Design mix as in column, pillar, piers, post and struts etc., complete all as specified and directed. |
| 9 | RCC M-25 (Design mix) beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed. |
| 10 | RCC M-25 (Design mix) slabs supported on walls, beams and columns of floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed. |
| 12 | Removing excavated soils to a distance exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 13 | TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending and binding with mild steel annealed wire, complete all as specified and directed. |
| 14 | All as per srl item No 1.12 here-in-before but 8 mm dia as in strips |
| 15 | Formwork to sides of concrete foundation, footing, base of column and raft beam sides and soffit of plinth beam for rough finished surfaces complete all as specified and directed. |
| 16 | Use and waste formwork to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support for rough finished surfaces, complete all as specified and directed. |
| 17 | Formwork to sides of pillar, post, struts, piers, column square, rectangular or polygonal rough finished surface of concrete, complete all as specified and directed. |
| 18 | Formwork to soffits of suspended slab such as roof slab, floor slabs landing and similar work, not exc. 200 mm thick, complete all as specified and directed. |
| 19 | Brickwork with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius in cement mortar 1:4, complete all as specified and directed. |
| 20 | Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 21 | Rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed. |
| 22 | Rendering 15 mm thick cement plaster in cement mortar (1:4) on other than fair faces of brick work and surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 23 | Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 24 | All as per srl item No 1.22 here-in-before but two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 25 | Applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed. |
| 26 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125mmx60mm incl bottom of each chowkat to be welded with 2 Nos 25mm x 25mm x 3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) including one shop coat of red oxide primer, complete all as specified and directed.Note: PCC 1:3:6 type C-0 as in backfill will be paid separately. Please Enable Macros to View BoQ information |
| 28 | Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125mmx60mm incl bottom of each chowkat to be welded with 2 Nos 25mm x 25mm x 3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 (using 12.5 mm graded crushed stone aggregate) including one shop coat of red oxide primer, complete all as specified and directed.Note: PCC 1:3:6 type C-0 as in backfill will be paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 days