|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft Disintegrated Rocks complete all as specified and as direcetd by Engineer-in-Charge |
| 2 | Material and labour for 100 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base complete all as specified and directed. |
| 3 | Supply & fixing rubber moulded decorative designed coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 4 | Material and labour for sand filling under floor or in foundation including watering and consolidation completed all as specified (Note:- Sand cushion layer consolidated thickness is 20 mm below precast interlocking paver block complete all as specified and directed. |
| 5 | M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary formwork. complete all as specified and as directed by Engineer-in-Charge |
| 6 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as directed above the starting point . |
| 7 | Supplying, installation, testing and commissioning of LED Bollard Light fitting of 9 Watt capacity and 600 mm height, suitable for outdoor garden/pathway illumination, complete with all accessories as required, of approved make such as Bajaj Electricals (BAJAJ Flute BGBOL 605 9W LED WW) / Havells India / Crompton Greaves Consumer Electricals / Signify or equivalent, comprising pressure die-cast / cast aluminium corrosion-resistant housing with UV stabilized powder-coated finish, overall height approximately 600 mm (±5%), 9W high efficiency LED module with opal polycarbonate/acrylic diffuser for uniform glare-free illumination, operating on 220–240 V, 50 Hz AC supply, complete with integral LED driver, base plate/flange mounting arrangement suitable for fixing on PCC foundation with anchor bolts, provision for loop-in loop-out wiring through weatherproof terminal block, minimum IP65 protection suitable for outdoor use, earthing provision, internal wiring, and all necessary hardware and accessories, complete in all respects as required; including making PCC foundation of suitable size wherever not available, complete with excavation, leveling, curing, and finishing for proper installation of bollard light. |
| 8 | Supplying, laying and fixing of heavy duty rigid PVC conduit of suitable diameter (minimum 25 mm) for accommodating 3 core 2.5 sqmm flexible cable, including all accessories such as bends, tees, couplers, inspection boxes, saddles, clamps and fixing hardware, laid underground/in PCC/along pathway as required for outdoor lighting system, including necessary excavation, refilling, dressing, protection from mechanical damage and making good disturbed surfaces, complete with proper routing for loop-in loop-out wiring of bollard lights, all as specified and directed by Engineer-in-Charge. |
| 9 | Supply, laying, connecting, testing and commissioning of 3 Core x 2.5 Sq.mm copper flexible cable, multi-stranded copper conductor, PVC insulated and PVC sheathed, 1100 Volts grade, conforming to IS 694, suitable for indoor/outdoor use. The cable shall be laid through conduit / surface / cable tray or directly connected to fixtures/equipment as required, including proper dressing, clamping, fixing, termination with suitable lugs, glands (if required), ferruling, and all necessary accessories complete in all respects as per site conditions and direction of Engineer-in-Charge. |
| 10 | Supplying, installation, testing and commissioning of outdoor type Feeder Pillar (SPN DB), floor/wall mounted, fabricated from CRCA sheet steel, powder coated with anti-corrosive treatment, dust, weather and vermin proof with IP-65 protection, suitable for 240V single phase supply, complete with 32 Amp DP MCB 'C\\" Curve breaking Capcity 16KA incomer and 4 Nos. SP MCB outgoing 'C' Curve type, copper busbar, neutral link, earth bar, internal FRLS wiring, cable entry with glands, lugs, ferruling, lockable door with canopy, PCC foundation with grouting, double earthing and all accessories, complete as required at site and as directed by Engineer-in-Charge |
| 11 | Supply, laying and commissioning of XLPE insulated, 3 Core armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, corss sectional area 4 Sqmm |
| 12 | Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, with precast earth pit of PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC. Please Enable Macros to View BoQ information |
