Tender For Special Repair To Mangal Pandey Road From Stn Chowk To Sadar Fly Over Under Age B/R-Ii Ge (West) Lucknow
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Mangal Pandey Road From Stn Chowk To Sadar Fly Over Under Age B/R-Ii Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M&L for scarifying or picking gravelled macadam (WBM surface) or bituminious macadam surface in area exe 400 sqm ,exc 50 mm deep and n exe 100mm deep complete as all specified and directed. |
| 2 | M&L for screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) complete as all specified and directed. |
| 3 | Labour only for 150 mm thick (Compacted thickness) WBM, in two layers with Granite coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread rolled and consolidated to gradient and camber required complete as all specified and directed.Note:- Screened road metal brought from item No-2 above. |
| 4 | M & L for 150 mm thick (Compacted thickness) WBM, in two layers with Granite coarse aggregate of grading 2 (63 to 40 mm size) or of grading 3 (50 to 20 mm size), spread rolled and consolidated to gradient and camber required complete as all specified and directed. |
| 5 | M&L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10.0 Kg per 10 Sqm using paving bitumen VG-10 applied with mechanical bouzer complete as all specified and directed. |
| 6 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical compressor and gunny bags to remove all loose dirt etc complete as all specified and directed. |
| 7 | M& L for repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete as all specified and directed. |
| 8 | M& L for applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5.0 Kg. Per 10 Sqmetres applied with mechanical bouzer complete as all specified and directed. |
| 9 | M&L for premix bituminous macadam( consolidated thicknes 75mm or less) with 4 % binder content using paving bitumen of VG-30 grade by weight of total mix laid/rolled and compacted to required camber and gradient complete all as specified and directed. |
| 10 | M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen of penetration VG-30, layed to required camber and gradient with sensor paver and rolled to a uniform smooth surface all as specified and directed. |
| 11 | M&L for providing and applying 2.5 mm thick road marking strips with 250 gram Glass Beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dier, seals, oil, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -10%, Resin-18%, Intermix Glass Beads - 30 % & filler (Calcite) - 42% in proportion. |
| 12 | Supply and fixing aluminium-alloy body Solar stud with following specification :-(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low sunlight.(b) Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.(c) 1.2V Ni-MH or Ni-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted inside solar stud.(d) Working time 3 to 4 days successively after the battery is fully charged.(e) Charging time for full charge One full sunny day.(f) Working temperature : 10 to 75 Degree Celcius.(g) Flash rate : 60 to 70 times per minute normally.(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensure easy and safe night driving.(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters approx.(k) Solar stud should be free of maintenance and operational in all weather conditions.(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side of the body to ensure genuinesess.Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank height 65 mm (Total height 90 mm including shank)(m) Weight of the Solar Stud should be 650 Gram approx.(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. |
| 13 | Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of size 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and weight 164 gram fixed with special epoxy chemical as per manufactures instructions. |
| 14 | Demolition of PCC ( un-reinforced) in ground floors and pavings not exc. 15 cm thickness below or above ground levels complete all as specified and directed. |
| 15 | S&F PVC (SWR) 100 mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors with all fittings complete all as specified and directed. |
| 16 | S&F Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 17 | M& L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including necessary excavation making drainage opening wherever required complete all as specified and directed. |
| 18 | M& L for providing and painting complying with IS:164 2023, IRC:35-2015 including one coat of primer and two coats of water based paint of approved brand with automatic kerb painting machine (Consumption shall be 1 Ltr for 3 Sqm area) on existing Kerb/RCC Crash Barrier/Parapet Wall, Head walls etc, to give an even shade, after thoroyghly cleaning of the existing surfaces by brooming, water washing the surface to remove all dirt, dust, peeled old paint, mortar drops and foreign matters including preparing the surafce even and smooth by sand paper, if requirted which includes cost of materials, labours, tool and tackles, cost of safety measures at work site,, insurance, statuatory labour compliances, all taxes, duties, cess cost of transportation, loading/unloading etc, complete as per specifications and as per directions. |
| 19 | M&L for providing and laying 25mm thick bitumen mastic wearing course (as per specification) with industrial bitumen of grade 85/25 conforming to IS:702 prepared by using mastic cooker and laid to required level and slope including providing anti skid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 Cum per 10 Sqm and at approximate spacing of 10cm centre to centre in both directions, pressed into surface protuding 1mm to 4mm over mastic surface inculding cleaning the surface, removal of debries etc complete all as specified and directed (considering bitumen using 10.2% as per MORTH Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender