|
| 1 | M&L for Repair to potholes depth of pot holes exc 30 mm , not exc 1Sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed. |
| 2 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm and bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness using crushed graded stone aggregate mixed with binder content of paving bitumen VG-30 with 5.5% binder contents by weight of total mix by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 Tonne capacity power roller including preparation of bitumen carpet in digital computarized weigh batch hot mix plant, complete all as specified. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer). |
| 3 | M&L for Thermoplastic road marking paint 2mm thick, white or golden yellow in colour, conforming to BS-3262, in lines, arrow, dashes & letters width and girth as directed by Engr in charge, applied hot, using application unit and retroreflective glass beads @ 250 to 300 gram/Sqm to withstand vehicular traffic load, laid as per manufacture's instructions, the finish surfaces to be level, uniform and free from streaks and holes as per MORTH specification complete all as specified and directed. |
| 4 | Supply and fixing in repairs Aluminium body cat eye of size 100mmx100mmx20mm fixing with MS Nails of 10 mm dia to bear the maximum load with PAMA strip lens reflector fon two sides of red/yellow colour complete all as specified and directed. |
| 5 | S&F in repair solar cat eye alunimum alloy shall (100% water proofing design according to IS) of size 125mm x 125mm of high efficiency monocrystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 MCD complete all as per manufactures instructions, complete all as specified and directed. |
| 6 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 7 | Providing and Fixing of Retro Reflectorised 1200 x 900 mm Hazard Sign Board made out of micro prismatic grade Type-XI retro reflective sheeting conforming to IRC-67:2012 & ASTM D4956-09 specifications, fixed over 4mm thick ACP(Aluminium Composite Panel) sheet, including 3.6m long M.S. angle post 35x35x3mm, painted black & white, with 1:2:4 CC foundation 45x45x60cm including excavation, curing etc. complete with 7 years warranty. |
| 8 | Providing and Fixing of Retro Reflectorised 1200 x 800 mm Hazard Sign Board made out of micro prismatic grade Type-XI retro reflective sheeting conforming to IRC-67:2012 & ASTM D4956-09 specifications, fixed over 4mm thick ACP(Aluminium Composite Panel) sheet, including 3.6m long M.S. angle post 35x35x3mm, painted black & white, with 1:2:4 CC foundation 45x45x60cm including excavation, curing etc. complete with 7 years warranty. |
| 9 | Supplying and fixing Modular Speed Breaker made of high-strength rubber/plastic composite, UV resistant, with standard yellow and black high-visibility reflective markings for safety, of width 300-350mm and height 50mm approx as per IRC:99-2018, including providing and fixing with M16 anchor bolts, washers, etc. complete all as specified and directed. |
| 10 | Providing and applying two or more coats of first quality synthetic enamel paint of approved brand and shade on kerb stones in alternate black & white or yellow & black bands of 300-450mm length, including cleaning surface, removing dust/dirt, applying primer coat if required, complete as per specifications and direction. |
| 11 | Supplying and fixing Convex Traffic Safety Mirror of approved make, having 600mm/800mm/1000mm diameter, made from unbreakable polycarbonate / stainless steel with 130°+ viewing angle, UV resistant, with reflective red & white border strip for visibility, mounted on 75mm dia GI pipe post 3m long, including excavation and fixing post in 1:3:6 cement concrete block 450x450x600mm, complete as per IRC:67 and direction of Engineer-in-charge. |
| 12 | Notes: The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
