Tender For Comprehensive Misc Repair To Md Accn Of Abod, Fd Wk Shop, Mes Accn (Rwa) In Zone At A A Banar Under Ge Banar
Tender Value
44 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BANAR → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Misc Repair To Md Accn Of Abod, Fd Wk Shop, Mes Accn (Rwa) In Zone At A A Banar Under Ge Banar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling loose concrete cover of RCC coloums, beams, slabs, Chajjas (Soffit only), and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry, including dusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm of 2 mm dia as reinforcement to concrete surfaces, applying adhesive/admixture over steel mesh and providing 30 mm thick (average thickness) guniting mix (using 1 part of ordinary portland cement 53 grade and 2 parts of ghaggar sand mixed with adhesive/admixture at the rate as per manufacturers instruction or 3% by wt of cement all as directed with a pressure of 2 to 2.5 kgs per sqm by guniting machine and surfaces finished even and fair, including 15mm thick plaster in cement mortar 1:4, necessary padding, steel scaffolding and shuttering for working platformm/formwork etc complete all as directed (Guniting work is to be carried out upto 06 mtr height from ground level). Notes :- (i) Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co. or their authorized dealer. |
| 2 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) complete all as specified. |
| 3 | All item as per Ser No 2.00 above but exc 1.5 sqm but n.exc 4sqm each complete all as specified. |
| 4 | Taking down shutters of any description exc 1sqm but not exc 2 sqm each complete all as specified. |
| 5 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified. |
| 6 | S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :--(a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447)(b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446)(c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455)(d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454)(e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844)Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx B. |
| 7 | M&L for powder coated aluminium grill in repairs of powder coating of minimum 50 micron with aluminium mesh of sze 50x50mm with square tube solid 5mm thick including aluminium channel of size thickness of channel 1.5mm complete all as specified and directed. |
| 8 | Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc complete all as specified. |
| 9 | S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type both sides (ISI marked) all with 6mm thick teak wood edging all around complete all as specified. |
| 10 | M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer complete all as specified. |
| 11 | S & F 100mm medium weight Mild steel butt hinges complete all as specified. |
| 12 | S&F aluminium anodised barrel tower bolt 150 mm long extruded section complete all as specified. |
| 13 | S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete all as specified. |
| 14 | S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified. |
| 15 | S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified. |
| 16 | S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified. |
| 17 | S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 30mm (when opened) complete all as specified. (Make - Ashish/Elite). |
| 18 | S & F in repair 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and otherside balancing white as in shelf for Cup board complete all as specified. |
| 19 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified. |
| 20 | M&L Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified. |
| 21 | M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified. |
| 22 | M&L glazed ceramic coloured tiles size 450x300x7mm/350x250x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified. |
| 23 | Supply and Laying of CPVC pipes 20mm outer diameter SDR 11 & plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 24 | All item as per Ser No 23.00 above but with 25mm bore pipe |
| 25 | M&L for Cutting chases, pinning in Brick/Stone walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and ctting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified. |
| 26 | S&F in repairs curtain rods stainless steel powder coated polished 20 mm dia incl brackets , side stop complete all as specified. |
| 27 | S & F in repair fancy type chromium plated bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified. |
| 28 | S & F in repair stop cock/angle cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union complete all as specified. |
| 29 | S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed . |
| 30 | S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 31 | S&F in repairs 15 mm Sink mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 32 | S & F in repair 20 mm dia brass CP towel rail 600mm long complete all as specified. |
| 33 | S & F in repairs CP health faucet hygienic spray (2in 1 facucet with 1.0M long tube) complete all as specified. |
| 34 | S&F in repairs shower rose fancy type bass chromium plated 125 mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specified. |
| 35 | S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern including soft closing black seat cover complete all as specified. |
| 36 | S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified. |
| 37 | S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of bracketscomplete all as directed and specified. |
| 38 | Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified. |
| 39 | Supply & Fix in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified. |
| 40 | Supply & Fix in repairs 15mm bore PVC connection pipe of 450mm size with washers complete all as specified. |
| 41 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying two coat of distemper oil emulsion (white or tint as directed) on walls with brush leaving permises clean etc complete all as specified and directed by Engineer-in-Charge. Note : (i) Quantity of material shall be calculated based on constants given in Joglekar book and requisite quantity will be deposited by contractor immediately after approval of sample for safe custody in terms of Note on CA.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.. |
| 42 | M&L for Preparation of old decorated surfaces of ceiling (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying one coat of white wash on ceiling with brush leaving permises clean etc complete all as specified. |
| 43 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified. |
| 44 | M&L for Preparation of old decorated surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and finishing walls with Acrylic Smooth exterior paint in camouglaging pattern of required shade : old work (one coat applied @ 1.00 ltr/5-6 sqm approx complete all as specified.Note : (i) Quantity of material shall be calculated based on constants given in Joglekar book and requisite quantity will be deposited by contractor immediately after approval of sample for safe custody in terms of Note on CA.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 45 | M&L for rendering 15mm thick ready mix plaster in ratio 1:6 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified. |
| 46 | M&L for rendering 15mm thick ready mix plaster in ratio 1:4 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on fair face of stone/concrete surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified. |
| 47 | M&L for rendering 15mm thick ready mix plaster in ratio 1:3 factory made blended mixture of OPC and graded sand (silica sand) and high quality additives designed for consistant quality and and high adhesion on Ceiling surfaces finished even and fair without using extra cement including taking down of cement plaster complete all as specified. |
| 48 | Supply only integral water proofing treatment Dr fixit or equivalent complete all as specified. |
| 49 | M&L for Preparation of newly plastered surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and applying two coat of distemper oil emulsion (white or tint as directed) on walls with brush leaving permises clean etc over a coat of putty complete all as specified.Note : (i) Quantity of material shall be calculated based on constants given in Joglekar book and requisite quantity will be deposited by contractor immediately after approval of sample for safe custody in terms of Note on CA.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site.. |
| 50 | M&L for Preparation of newly plastered surfaces of walls (plastered or unplastered) including cornices, pillasters etc by brooming down or wire brushing removing dust, dirt etc scrapping smoke, soot, moulds, moss and efflorecent salts, removing oil and greasy spots and finishing walls with Acrylic Smooth exterior paint in camouglaging pattern of required shade complete all as specified.Note : (i) Quantity of material shall be calculated based on constants given in Joglekar book and requisite quantity will be deposited by contractor immediately after approval of sample for safe custody in terms of Note on CA.(ii) The colour shall be machine mixed of approved shade prior to start the work at site, no mixing of colour shall be allowed at site. |
| 51 | M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified. |
| 52 | Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane incl hacking out complete all as specified. |
| 53 | S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted of and fixed in position incuding provn of inlet , out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc complete all as specified. ( Make : Sintex , polycon , SPL ) |
| 54 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 55 | Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick and clearing rubbish from site complete all as specified. |
| 56 | M&L for 40 mm thick Cement concrete 1:2:4 type B-1 as in floor including surfaces to be finished even and smooth with using extra cement complete all as specified. |
| 57 | M & L 75 mm thick Cement concrete 1:3:6 (40mm graded aggregate) in flooring or plinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified. |
| 58 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification complete all as specified. (Make : Rajshree, ENGCO Industries) |
| 59 | M&L Factory made solid panel of PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. (Make: Rajshree, ENGCO Industries or equivalent) |
| 60 | M&L Welding in repairs n. exc 6mm thick metal and n. exc 2.5 cm in length complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender