|
| 1 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 3 | Removing excavated soils not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. |
| 4 | Supply and laying of DI pipe class K-7, centrifugally cast with socket & spigot confirming to IS: 8329/2000 in standard length of 5.5 meters with Cement Mortar lining inside the pipe with outside zinc coating with finished layers of black BITUMEN/BLUE EPOXY SYNTHETIC RESIN of the following sizes:- MAKE : ELECTROSTEEL CASTING LIMITED or equivalant(a) 200 mm bore |
| 5 | (b) 150 mm bore |
| 6 | (c) 100 mm bore |
| 7 | (d) 80 mm bore |
| 8 | Supply and fixing pipe galvanised medium grade with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc. supplied and laid in trenches complete including all fittings of following sizes :-Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 9 | (b) 40 mm bore |
| 10 | (c) 25 mm bore |
| 11 | (d) 20 mm bore |
| 12 | (e) 15 mm bore |
| 13 | Cutting the CI/DI pipes and reducing the required length before laying for inserting of new CI specials such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc complete for the following:- Note :- CI specials and earth work will be measured and paid seperately.(a) 200 mm bore |
| 14 | (b) 150 mm bore |
| 15 | (c) 100 mm bore |
| 16 | (d) 80 mm bore |
| 17 | Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete of the following sizes all as specified and as directed. 1. The fittings shall be as per IS1538-19892. The joints shall be measured and paid separately.(a) upto 150 mm dia bore. |
| 18 | (b) 200 to 300 mm dia bore. |
| 19 | Taking out/burning out of leaking and damaged lead joints of the existing CI mains from the position including removing the old lead carefully with out damaging to the pipe complete for the following bore of pipes :- Note :- Excavation and earth work will be measured and paid separately.(a) 200 mm bore |
| 20 | (b) 150 mm bore |
| 21 | (c) 100 mm bore |
| 22 | (c) 80 mm bore |
| 23 | Material and labour for run lead joints including jointing materials such as spun yarn etc complete for the following sizes:-(a) 200 mm bore |
| 24 | (b) 150 mm bore |
| 25 | (c) 100 mm bore |
| 26 | (c) 80 mm bore |
| 27 | Welding joints for CI / DI / MS pipes including jointing material such as welding rods etc. complete for pipe of following description all as specified and directed.Note : The contractor shall make his own arrangement for Welding Machine and DG set required for welding work and nothing extra from the department shall be admisible on this account.(a) 400 mm bore |
| 28 | (b) 200 mm bore |
| 29 | (c) 150 mm bore |
| 30 | (d) 100 mm bore |
| 31 | Cast Iron Sluice Valve class PN-1.6, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, CI operating wheel, all nuts, bolts, washers, gaskets etc. of the following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed. Make : Advance / Bir / Leader / Sant/RAMCO(a) 400 mm bore |
| 32 | (b) 200 mm bore |
| 33 | (c) 150 mm bore |
| 34 | (c) 100 mm bore |
| 35 | (d) 80 mm bore |
| 36 | Supply & fixing cast iron Non Return valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc, of the following description including dismantling of old unserviceable cast iron Non Return valve, complete all as specified & directed. Make : Advance / Bir / Leader / Sant/RAMCO(a) 200 mm bore |
| 37 | (b) 150 mm bore |
| 38 | Supply and fixing in replacement air release valve with double chamber of bore confirming to IS 14845 including taking out unserviceable air release valve complete all as specified and directed by Engineer-in-Charge of the following sizes:- Make : Advance / Bir / Leader / Sant/RAMCO(a) 50 mm dia |
| 39 | (b) 80 mm dia |
| 40 | Supply and fixing Gun metal globe / gate valve ISI Marked with and including jointing meterial and taking out old unserviceable valves complete all as specified and directed of following sizes :- Make : Advance / Bir / Leader / Sant/RAMCO(a) 50 mm bore |
| 41 | (b) 40 mm bore |
| 42 | (c) 25 mm bore |
| 43 | (d) 20 mm bore |
| 44 | (e) 15 mm bore |
| 45 | Supply and fixing Stop valves of cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete of the following description including taking out the old unserviceable stop valve complete all as specified and directed. Make : Advance / Bir / Leader / Sant/RAMCO(a) 50 mm bore |
| 46 | (b) 40 mm bore |
| 47 | (c) 25 mm bore |
| 48 | (d) 20 mm bore |
| 49 | (e) 15 mm bore |
| 50 | Supply and fixing GI Socket of Heavy grade with and including jointing meterial and taking out old unserviceable socket complete all as specified and directed of following sizes :- Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 51 | (b) 40 mm bore |
| 52 | (c) 25 mm bore |
| 53 | (d) 20 mm bore |
| 54 | (e) 15 mm bore |
| 55 | Supply and fixing GI Union of Heavy grade with and including jointing meterial and taking out old unserviceable Union complete all as specified and directed of following sizes :- Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 56 | (b) 40 mm bore |
| 57 | (c) 25 mm bore |
| 58 | (d) 20 mm bore |
| 59 | (e) 15 mm bore |
| 60 | Supply and fixing GI Elbow of Heavy grade with and including jointing meterial and taking out old unserviceable Elbow complete all as specified and directed of following sizes :- Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 61 | (b) 40 mm bore |
| 62 | (c) 25 mm bore |
| 63 | (d) 20 mm bore |
| 64 | (e) 15 mm bore |
| 65 | Supply and fixing 6 \\" Nipple of Heavy grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 66 | (b) 40 mm bore |
| 67 | (c) 25 mm bore |
| 68 | (d) 20 mm bore |
| 69 | (e) 15 mm bore |
| 70 | Masonary Valve Pit with PCC 1:4:8 type D-2 as in foundation, Brick Work 23cm thick in CM 1:4, 15mm thick plaster in CM 1:4 internally and flush pointing in same mortar as the work proceeds externally, 40mm thick flooring in PCC 1:2:4 type B-1 laid over 75mm thick hard core, top cover shall be made out of MS sheet 10 SWG thickness fixed in angle iron frame made out of angle size 40 x 40 x 6mm with 12mm dia handle and two number hinges on one side and locking arrangement at other side complete including painting with two coats of sythetic enamel paint over a coat of red oxide primer, complete including earth work, excavation, disposal of surplus spoil not exceeding 50m all as specified and directed of the following sizes :-(a) 950mm x 950m x 950mm (internal dimension of chamber) |
| 71 | (b) 600mm x 600m x 950mm (internal dimension of chamber) |
| 72 | (c) 450mm x 450m x 700mm (internal dimension of chamber) Please Enable Macros to View BoQ information |
