|
| 1 | M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/ Concealed conduit/Casing caping , clip, with suitable Suitable for modular switches including modular metal flush box and modular whit cover cover including 1.50 sqmm green copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :-(Cable Make: Havells, Finolex,RR cable) One light point or fan point contrlled by one switch |
| 2 | S & Fmodular switch 1way 6A, 1 module |
| 3 | Supply and fix ceiling rose 3 terminals |
| 4 | Supply and fix in surface mounted LED batten with anadised aluminium housing with poly carbonate diffuser and integrated electronic driver complete with all accessories lamp type 20 W 4 feet length and internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. |
| 5 | Supply and fixing in LED light fitting with diffuser 2 feet, 10 watt 220 V AC with integrated electronic driver including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 6 | S & F in repair MCB distribution board SPN 2 way single door 240V powder coated . |
| 7 | Supply and fixing Exaust fan made of sturdy Engineering plastic complete with lover shutter, AC single phase, 230 V of size 300 MM sweep with blade and frame and louvers |
| 8 | Supply and Fix XLPE insulated , armoured Heavy duty electric cable with aluminium coductor 1100 V olt grade 10 Sq.mm X 2 core |
| 9 | S & F MCB SPN 32 Amps10 KA, 'C' Series, 240V, 50HZ, ISI Marked . |
| 10 | Surface excavation not exceeding 30cm deep & averaging 15cm deep in soft/losse soil including removal of vegetation, bushes, shurbs & trees(not exceeding 30cm in girth) complete all as specified & directed. |
| 11 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft /loose any type of soil complete all as specified & directed by engr -in -Charge |
| 12 | M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr -in -Charge |
| 13 | M&L reinforced cement concrete (RCC)Type B1 1:2:4 using 20mm graded mechanically crushed stone aggregate as in foundations, includingrafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr -in -Charge |
| 14 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed by Engr -in -Charge |
| 15 | M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for fair finished surfaces of concrete complete all as specified and directed by Engr -in -Charge. |
| 16 | M&L RCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr -in -Charge |
| 17 | M&L RCC type B 1, 1:2:4 using 20mm graded mechanically crushed stone aggregate as in columns, pillars, piers,posts and struts complete all as specified and directed by Engr -in -Charge |
| 18 | M&L RCC type B 1, 1:2:4using 20mm graded mechanically crushed stone aggregate as in beams, cantilevers,bressummers, lintels over 1.5mtr span complete all as specified and directed. |
| 19 | M&L for formwork to sides of concrete foundations, footings, bases ofcolumns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished flat surfaces of concrete complete all as specified and directed. |
| 20 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished flat surfaces of concrete complete all as specified and directed. |
| 21 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and directed. |
| 22 | M&L mild steel TMT bars 10mm dia and over, Fe 500/Fe 500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and directed. |
| 23 | M&L mild steel TMT bars 6mm to 8mm dia, , Fe500/Fe500D grade confirming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed by Engr -in -Charge |
| 24 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed by Engr -in -Charge |
| 25 | Removal of soil to a distance not exceeding 50m and depositing where directed complete all as specified and directed by Engr -in -Charge |
| 26 | M & L for laying broken stone or boulders hardcore of guage exc 63 mm but not exc 100 mm deposited spread and levelled in layers not exc 15 cm thick watered rolled/rammed to a true surface complete all as specified and directed |
| 27 | Material and labour for, 75 mm thick Plain Cement Concrete, (1:4:8), type D2, using 40 mm graded stone aggregates, as in sub base complete all as specified and as directed. |
| 28 | M&L for cement concrete 1:2:4 type B-1 (40mm thick) using 20mm graded aggregate as in leveling course/sub base complete all as spd directed by Engr-in charge |
| 29 | M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finish and. Complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L Non skid ceramic coloured tiles 7 to 8mm thick Suare/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match, complete all as specified & directed. |
| 31 | M&L coloured glazed ceramic tiles 300 x450x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed . |
| 32 | S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid ande over and including 15mm Screed in CM 1:6 including all as specified and as directed. |
| 33 | Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in paving/plinth protection/ laid in panels and joints filled with mix of bitumen and sand (1:3) by weight, finished the surface even and fair without using extra cement complete all as specified and directed |
| 34 | M&L for providing precast cement concrete block masonry with PCC solid blocks in 1:3:6, type C1 using 20mm graded stone aggregates exceeding 10cm n width and set in cement sand mortar (1:6) complete all as specified and as directed. |
| 35 | M&L for providing precast cement concrete block masonry with PCC solid blocks in 1:3:6, type C1 using 20mm graded stone aggregates 10cm thick and set in cement sand mortar (1:6) complete all as specified and as directed. |
| 36 | M&L for 15mm thick rendering on brick or concrete surface wall on fair face/other than fair face in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately. |
| 37 | Supply only water proof compound |
| 38 | M&L for render 10mm thick on fair faces /other than fair face of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles etc complete all as spd and directed. |
| 39 | M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed. |
| 40 | M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on wall surface complete all as specified and as directed. |
| 41 | M&L for new surface applying three coat of white wash on ceiling surface complete all as specified and as directed. |
| 42 | M&L for Applying two coats of cement base paint over a coat of primer on new wall surface including preparation of surface complete all as specified and as directed. |
| 43 | S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed and complete all as specified and as directed. |
| 44 | S& F Stop valves 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 45 | S & F 15 mm CP cast copper alloy bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 46 | S & F 15 mm CP cast copper alloy 2way bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 47 | S&F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches complete all as specified and as directed. |
| 48 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed. |
| 49 | Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls/treanch fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed. |
| 50 | M&L Precast RCC 1:2:4 type B1 (using 20mm stone aggregate) as in cover slab of drain, culvert and the like set in CM 1:4 all as specified and as directed. |
| 51 | S&F PVC (SWR) bends any radius, 110mm bore with / without access door, complete all as specified and directed. |
| 52 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 53 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 54 | M&L for cast iron floor trap 75mm dia, with grating including jointing to wate pipe fixed in cement concrete type B1 (1:2:4). |
| 55 | Supply and fix PVC connection 15 mm dia, 450 mm long including check nut complete, all as specified and directed. |
| 56 | M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed. |
| 57 | Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed. |
| 58 | S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed. |
| 59 | S&F in rep Viterous china wash basin, white, flat back, size 630x450mm counter sunk oval type fixed in granite excluding taps, waste,chain and plug and porcelain stopper complete all as specified and directed |
| 60 | Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe |
| 61 | Supply and fixing vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed. |
| 62 | S & F waste coupling CP brass (half or full threaded) 32 mm diacomplete all as specified and directed. |
| 63 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 64 | Supply only PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve flaot and handle including bracket and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed. |
| 65 | Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified. |
| 66 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 67 | S & F chromium plated square shape towel ring fixed with chromium plated brass screws in approved pattern complete all as specified and directed. |
| 68 | S & F stainless steel chromium plated toilet paper holder in approved pattern, shape and size completel all as specified & directed. |
| 69 | S & F as fancy type chromium plated brass soap dish suitable for double soap fixed of approved pattern, shape and size complete all as specified & directed. |
| 70 | S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed. |
| 71 | S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed. |
| 72 | S&F Powder Coated aluminium frame & shutter for windows, ventilators with one or more rebates including joining cleat for fixing, Decogrills complete all as specified |
| 73 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 75 mm long complete all as specified and directed |
| 74 | S&F 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed. |
| 75 | S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed |
| 76 | S & F 3 mm thick sheet glass figured glass n exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed. |
| 77 | S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed. |
| 78 | S&F in Gun metal Gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed including including cutting / threading old pipes and provision of new fittings such as Tee, socket, elbow, union etc as required, complete all as specified and directed |
| 79 | S & F of 25 mm bore ball valves, high pressure, PTMT, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 80 | M & L concrete bed to drain pipes including packing under , haunching against RM the sides of pipes after they are laid and tested in cement concrete 1:3:6 for 150 mm dia pipe complete all as specified and directed. |
| 81 | M & L for 150 mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed as specified |
| 82 | M&L for APP based polymeric memberane minimum weighing 3.0kg/Sqm and minimum 3mm thick with polyster non wove fabric (weight not less than 150 gms /Sqm) laid over primed surface including bitumenous primer conforming to IS 3384 applied @ 0.30 Ltr/Sqm by forced including removal of existing WPT all as specified and directed.Four course roof treatment consist as under :-(i) Applying 1Coat of bituminous primer conforming to IS 3384 applied @ 0.30 Ltr/Sqm. (ii) Laying of APP based memberane as specifiedf thickness and weight.(iii) Applying two coats of Aluminium paint @100ml/sqm Please Enable Macros to View BoQ information |
