|
| 1 | Design Drawing and Construction of 30.00 mtr span (C/C of bearings) Steel Trussed through Type Bridge (Double Lane) (Carriage way width 7.50 Mtrs) incl. Construction of 5.00 mtr long approaches on both sides with Designing/Commissioning and construction of foundation with necessary Dewatering if required RCC sub- structure covering abutments, dirt wall , return wall on Turn Key basis and RCC Superstructure including Deck Slab including Soil Investigation and Vetting of Design from Design Directorate/GCET or any IIT, with necessary protection works, walling, footpath of width 1.20 Mtr on Both side, Crash Barriers Both sides, Railing etc. as per IRC70 loading specifications incl. painting and finishing, supplying/ fixing of bearings, suitable expansion joints and laying of RCC wearing coat all inclusive; arranging and maintaining diversions, dewatering during execution including all leads, lifts and carriage (complete job) including Earthwork and Dismentaling of existing structure and as per directions of Engineer-in-charge. |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 9 | Foundations, footings, bases for columns |
| 10 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 11 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 12 | Dumping Stone including Cost of Stones in Horizontal on Level for Plumb Concrete. |
| 13 | Providing and Laying WBM Gr-II (with speacified stone aggergrates Stone screenings and binding Material complete including sorting , spreading to templete and consiolidations with power Road Roller 8 to 10 ton capacity etc. and base stone aggerate 63 mm to 45 mm size incl. stone screning size 13.20mm. |
| 14 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 15 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity |
| 16 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. |
| 17 | Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. |
| 18 | On W.B.M. @ 0.75 Kg/sqm. |
| 19 | Carriage of material by M.T including loading unloading and stacking at site complete |
| 20 | Sand for an avg. lead of 15.00 Kms by MT |
| 21 | Stone aggregate Below 40 mm lead up to 15.00 Kms by MT |
| 22 | Stone aggregate Above 40 mm lead up to 15.00 Kms by MT |
| 23 | Soling Stone for an avg. lead of 5.00 Kms. Please Enable Macros to View BoQ information |
