Tender For Annual Maintenance Rate Contract For Repairs/ Renovation / Routine Maintenance Of Municipal Assets And Other Municipal Bulidings/ Lanes & Drains / Toilet- Lavatory Block (Ct-Pts), Urinals For The Year 2026-27., Srinagar-Jammu And Kashmir

TDR : 55961364

Tender Notice
BOQ

10 Days Left

Srinagar , Jammu and Kashmir

Tender Brief : Tender For Annual Maintenance Rate Contract For Repairs/ Renovation / Routine Maintenance Of Municipal Assets And Other Municipal Bulidings/ Lanes & Drains / Toilet- Lavatory Block (Ct-Pts), Urinals For The Year 2026-27.

Document Fees
₹ 2600 /-

EMD
₹ 230000.0 /-

Tender Value
₹ 1.15 Crore /-

Submission Date
25-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Mazdoor
2	Carpenter 1st class
3	Carpenter 2nd class
4	Mason 1st class
5	Mason 2nd class
6	Plumber
7	Black Smith 1st Class
8	Electrician
9	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil
10	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
11	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
12	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13	Providing & Laying in position cement concrete.1:2:4(1 cement: 2coarse sand : 4 graded stone aggregate 20 mm N.S crushed),reinforced cement concrete excluding the cost of centering, shuttering, finishing & reinforcement. All work upto plinth level.
14	Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
15	Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
16	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
17	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
18	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
19	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars)
20	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job. (a) (Welded.)
21	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes.
22	Providing /Fixing G.I Chain Link fencing of required width in mesh size 50x50mm including strengthing with 2mm dia wire or nuts, bolts and washers of required size including painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture complete job as per the directions of the Engineer in charge. a) Made of G.I wire of dia (4mm)
23	Form work centering / shuttering including Strutting, Propping etc and removal of form work for:(a) Foudation, footings, basis, coloums etc
24	(b) Suspended floors, roofs, landings etc for mass concrete.
25	Stairs (excluding landings) except spiral staircases.
26	Columns, piers, abutments, pillars, posts and struts
27	Walls any thickness ) Including attached plasters, buttresses, Plinth and String Course etc.
28	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
29	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structrure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
30	Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) in super structrue .
31	Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
32	Random Rubble masonry with hard stone (Quarry) in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
33	Random Rubble masonry with hard stone (Quarry) in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)
34	Dry random rubble masonry with hard stone (Quarry) in foundation and plinth:With bond stone.
35	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including all necessary fittting complete job as per the directions of EIC forgein/KD Wood
36	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).(35 mm thick) First class kail wood
37	Providing and fixing wire gauze shutters (35 mm thick using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood
38	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size)
39	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides,Grade I, Type II IS : 12823 marked
40	Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition :Budloo wood
41	Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo wood
42	Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First. Class imported K.D Wood.
43	Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Popular wood.
44	Providing and fixing of readymade wooden paneling of 12mm (net thickness) including providing incluiding cost of screws, wooden plugs including wooden cornice complete job as per directions of EIC (A) made from imported wood
45	Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places.(A) 6 mm thick
46	B) 12 mm thick
47	C) 19 mm thick
48	Providing and fixing of single side laminated ply wood including cost of nails adhesive etc. complete(A) 6 mm thick
49	(b) 12 mm thick
50	c) 18-19 mm thick
51	Providing and fixing of Dulmica/ sun mica sheeting including cost of nails and adhesive complete job as per directions of EIC (A) 0.8-1 mm thick
52	B) 0.4-0.5mm thick for lining
53	Providing and fixing of ornamental cornice of following size. (1st class budloo)A) 50 mm face
54	B) 65 mm face
55	c ) 75 mm face
56	Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Chaar Phool
57	Supply & fixing of wooden flooring (imported) using wooden planking tonged & grooved in flooring including fixing with iron screws complete job as per directions of EIC (12 mm thick) including all allied accessories like foam with cornices etc complete job as per the directions of EIC
58	Providing and fixing 20mm thick overlapped weather boarding in soffits of 1st class imported K.D Wood including applying priming coat of approved quality primer.as per directions of EIC
59	Providing and fixing of planed eaves boarding 250mm x 32mm size of 1st Class Budloo wood.
60	Providing and fixing of wooden beading ornamental 25mm x 6mm size of Budloo wood.
61	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
62	Providing and fixing of glass pans with wooden fillets of required size wherever necessary.(A) Glass pans 3.5mm thick weighing 8.70 Kg /Sqm.
63	B) Glass pans 5mm thick weighing 13.75 Kg / Sqm.re
64	c) Extra for using glass film of required design/pattern
65	Providing and fixing of reflective glass panes 3.5 mm thick in doors windows and clearstory windows including cost of budloo wood beading of required size.
66	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2
67	Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2
68	Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
69	Providing /fixing of colour coated sheet roofing tile profile /high rib including vertical,curved surfaces fixed with specialy designed screws/ J or L hooks including cutting to size and shape wherever requried all as per the directions of EIC a) 0.50 mm thick
70	Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2
71	Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
72	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate
73	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
74	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
75	B) Extra for using chemical (Tilofix) of required thickness instead of cement mortar/ slurry
76	Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown
77	Chequerred precast cement concrete tiles 22mm thick (coloured) in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete job as per the directions of EIC
78	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete including all carriages complete job as per the directions of EIC Size of tile 600x600 mm
79	Providing and laying Vitrified tiles in floor with different sizes(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints Size of tile 600x600 mm
80	Add for using spacers in tile work of requiredthickness
81	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
82	Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.1 Marble Work
83	12mm thick cement plaster on walls in 1:6 mix (1 Cement :6 sand )
84	Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete
85	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
86	12mm thick cement plaster 1:4 mix (1 Cement :4 sand )
87	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
88	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
89	Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
90	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
91	Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
92	Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
93	Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
94	Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade.(A) New work (two or more coats applied @ 3.84 kg/10Sqm) including cost of priming coat @0.80 liter/Sqm
95	Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10Sqm) complete
96	Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
97	Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
98	Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface.
99	Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade .one or more coats on old work.
100	Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work
101	Wall painting with plastic emulsion paint (two ormore coats) of approved brand and manufacture to give an even shade. New work
102	Wall painting with plastic emulsion paint (one ormore coats) of approved brand and manufacture to give an even shade. Old work
103	Finishing walls with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67 liters/10sqm onexisting cement paint surface)
104	Finishing wall with premium acrylic smooth exterior paint with siliconeadditives of required shade on New work (two or more coats applied @1.43 liter/10sqm over and including priming coat of water exterior paintapplied @ 2.20kg/10sqm)
105	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required color to give an even shade: Old work (two or more coats
106	Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required color to give an even shade: New work (two or more coats) including a coat of approved steel primer including a coat of Moderant Solution.
107	Dismantling of existing chain link fencing, steel work complete, including stacking of serviceable material and disposal of unserviceable material within a lead as directed.The cost of dismantled material scrap shall be duducted in the bill).
108	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead
109	Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet The cost of dismantled material scrap shall be duducted in the bill)
110	Dismantling of existing wooden ceiling including stacking of serviceable material and disposal of unserviceable material as directed with all leadscomplete.
111	Dismantling wood work in frames, trusses, purlins and rafters up to 10 meters span and five meters height including stacking the material within 50 meters lead.A) of Sec area 40 sqcm and above The cost of dismantled material scrap shall be duducted in the bill)
112	Dismantling marble chips in flooring and skirting (excluding base course) including stacking of serviceable material and disposal of unserviceable material within a lead of 100 meter.
113	Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge:1:3:6 or richer mix (i/c equivalent design mix)
114	Demolishing R.C.C. work manually/by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. The cost of dismantled material scrap shall be duducted in the bill)
115	Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar The cost of dismantled material scrap shall be duducted in the bill)
116	Labour charges for refitting of stone mosonary (stones available at site) in 1:6 mix including cost of cement, sand and all carriages up to site complete job as per directions of EIC
117	Labour charges for refitting of brick mosonary (bricks available at site) in 1:6 mix including cost of cement, sand and all carriages up to site complete job as per directions of EIC
118	Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
119	Dismantling damged tile work in floors including stacking material within 50 meters lead.including disposal of unservicable material within 50m lead as per directions of engineer incharge.
120	Providing and fixing of lock for aluminium doors of approved make as per directions of EIC.
121	Providing and fixing of G-Channel,wheel sets,etccomplete set for sliding door .including fittings /fixtures complete job as per the directions of EIC
122	Providing and fixing double action hydraulic floor spring of approved brand and manufacture confoRming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight up to 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.(A) With stainless steel cover/ brass plate minimum1.25 mm thickness.
123	Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
124	Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make confoRming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns
125	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
126	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / Sqm)
127	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm
128	Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge Pre-laminated particle board with decorative lamination on both sides.
129	Providing and fixing machine molded ACP covering of approved pattern & design, made out of machine cut aluminum sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia. and 75 mm long bolt including providing aluminum washers 2 mm thick & 15 mm dia. at a staggered pitch of 200mm Centre to Centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. Including frame work complete as per direction of Engineer-in-charge(A) .ACP 3.5mm thick of required color
130	B) ACP 4.0mm thick of required color
131	Providing & laying Black cutting / Nallah Muck / GSB filling got by lorries including Loading, unloading, ramming, dressing, and watering in layers and consolidation with P.R.R/D.R.R of 8 ton to 10 ton to required gradient, including all sorts of carriages complete job.
132	Providing & laying /Black cutting / Nallah Muck / GSB filling got by lorries including Loading, unloading. Ramming, dressing, and watering in layers and , including all sorts of carriages complete job.
133	A) Supplying and stacking of graded stone aggregate at site of size range a)63mm to 45mm Size, includingSupply and stacking of stone screening / chippings at site , b)13.2 mm(Type-A), includingSupply and stacking of moorum at site Complete job.Laying water bound macadam with specified stone aggregate stone screening and binding material including , screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete including cost of all materials and carriages upto site of work complete job.a) Base course with 63mm to 45mm size including, stone screening 13.2mm size.
134	Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job .
135	Earth filling (Sweet Earth ) got by lorries including loading, unloading,ramming in layers, dressing, watering & royality including all carriages upto site of work complete job as per directions of engineer incharge. (earth stack measured will be reduced by 20% for payment )
136	Engagement of Dewatering watering pumps for dewatering during execution of work including all POL charge Completed job as directed at site
137	Engagement of excavator (JCB) in all terrains including fuel charges complete.
138	Providing and fixing of wardrobe, almirah, drawer locks (Sample to be approved by EIC)
139	Providing and fixing of aluminum double channel with wheel set for sliding glass window of approved quality of following sizes (A) 20 mm
140	B) 25 mm
141	Providing and fixing of door closer capsule type of standard make
142	Providing and fixing of door closer spring type of standard make
143	Providing and fixing of following fittings (A) Aldrop (Aluminium)
144	B) Tower Bolt 100mm Aluminium
145	C) Tower Bolt 150mm Aluminium
146	D) Handle 100mm Aluminium
147	E) Handle 125 mm Aluminium
148	F) I Hook
149	G) Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 75x45x3.2 mm
150	H) Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x63x3.2 mm
151	I) Aldrop 250-300mm long with in built locking arageement of approved quality as per the directions of EIC
152	Providing and fixing bright finished 100mm mortice lock with 6 levers with pair of handles for aluminum doors of approved quality with necessary screws etc. complete as per direction of Engineer-in- charge
153	Providing and fabrication of almirah /wardrobe 24’’ deep made up of 19 mm thick ply to ply frames, shutters shelves and 12 mm thick back board including 1 mm thick dulmica lining an exposed surface & 0.7 mm thick on inner side including modern handware fittings & fixtures etc complete job as per the directions of EIC
154	B) 40-45 cm deep
155	Supplying and fixing of rolling shutters of approved make made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade No:2 and M. S. top cover of required thickness for rolling shutters(80x1.25mm M.S Laths with 1.25 mm thick top cover)
156	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying priming coat of approved steel primer
157	Providing and fixing of water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confiRming to I.S. 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White vitreous china long pan pattern W, C. pan of size 580mm with integral type foot rests. (Jaquar/ Hindware/ Cera/ Kerrovit or equivalent)
158	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white PVC flushing cistern with manual controlled device (handle lever) confiRming to I.S. 7231with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. ((Jaquar/ Hindware/ Cera/ Kerrovit or equivalent)
159	Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer including white Vitreous China padestal for wash basin complete job as per the directions of EIC.
160	Providing and fixing ball bearing for rolling shutters.
161	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
162	Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm
163	Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete: 10 liter capacity -White
164	Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid.
165	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm size respectively.
166	Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x510mm bowl depth 200mm. (Sample to be approved by EIC)
167	Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings 18.27.1 Size 600x450x200 mm.
168	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern.
169	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
170	Providing and fixing beveled edge mirror of specified brand mounted on 6mm thick plywood/ hardboard including cost of wooden/PVC plugs and CP brass screws. (A) Circular shape 450mm dia.
171	B) Rectangular shape 453x357mm.
172	Providing and fixing of C.P grating 100mm size. ISI
173	Providing and fixing of G.I pipes (class B pipes) complete with G.I fittings and clamps including cutting and making good the walls etc. internal work (Exposed on Walls) (Sample to be approved by EIC) (A) 15mm dia. Nominal bore
174	B) 20mm dia. Nominal bore
175	C) 25mm dia. Nominal bore
176	D) 32mm dia. Nominal bore
177	E) 40mm dia. Nominal bore
178	F) 150mm dia. Nominal bore
179	Providing and fixing of G.I pipes (class B pipes) complete with G.I fittings including trenching and refilling etc. (external work) (Sample to be approved by EIC) (A) 15mm dia. Nominal bore
180	B) 20mm dia. Nominal bore
181	C) 25mm dia. Nominal bore
182	D) 32mm dia. Nominal bore
183	E) 40mm dia. Nominal bore
184	F) 50mm dia. Nominal bore
185	G) 65mm dia. Nominal bore
186	H) 80mm dia. Nominal bore
187	I) 100mm dia. Nominal bore
188	j 150 mm dia Nominal bore
189	Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore
190	B) 20mm dia. Nominal bore
191	Providing and fixing of following G.I. fittings.15 mm nominal bore.(Sample to be approved by EIC)(A) Elbow
192	B) Tee 15 mm
193	C) Union 15 mm
194	D) pvc plug/ G.I Plug
195	Nipple (A) 50mm long.
196	B) 75mm long
197	C) 100mm long
198	D) 150mm long
199	Socket (A) 15mm
200	B) 20mm
201	C) 25mm
202	Reducer(A) 15mm-20mm
203	B) 20mm-25mm
204	C) 20mm-32mm
205	D) 25mm-32mm
206	Providing and fixing of following G.I. fittings. 20 mm nominal bore.(Sample to be approved by EIC) (A) Elbow
207	B) Tee 20mm
208	C) Union
209	D)pvc plug/ G.I Plug
210	Nipple (A) 50mm long. 20mm
211	B) 75mm long 20mm
212	C) 100mm long
213	D) 150mm long
214	Providing and fixing of PVC connection with C.P. brass unions (A) 300mm long.
215	B) 450mm long
216	C) 600mm long
217	Providing and fixing ball valve (brass) of approved quality complete (Sample to be approved by EIC)(A)15mm dia.
218	B) 20mm dia.
219	C) 25mm dia.
220	D) 40mm dia.
221	Providing and fixing gate valve (brass) of approved quality complete (Sample to be approved by EIC)(A) 20mm dia.
222	B) 25mm dia.
223	C) 15mm dia.
224	D) 40mm dia.
225	Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete: 32 mm dia
226	B) 40.mm dia
227	Providing and fixing of Ball cock ( Brass) of approved quality and make without plastic float.(A) 15 mm
228	B) 20 mm
229	Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 mashed indicating the BIS license No. with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but including all required tankey nipples and excluding the base support for tank valid ISI license complete
230	Providing and fixing of C.P. Cups for C.P. fittings.
231	Providing and fixing of C.I. manhole frame and cover heavy duty of following sizes.(A)12\\"x12\\"
232	B) 18\\"x18\\"
233	C) 24\\"X24\\"
234	Providing and fixing of water heater (geysers) (Havells/ Hindware/ Jaquar/ Venus or equivalent) including cost of dash fasteners with nuts andwashers (A) 60 Litre
235	B) 50 Litre
236	C) 40 Litre
237	D) 35 Litre
238	E) 25 Litre
239	Providing and fixing Geyser elements (as per Geyser type) dry/ wet
240	Providing and fixing Geyser the theromostat
241	Providing and fixing Drain plug with washer.
242	Providing and fixing Safety valve for geysers.
243	Providing and fixing water washers for geysers.
244	Providing and fixing of pressure water ball Valve
245	Providing and fixing C.P. brass bib cock of approved quality 15mm nominal bore with flange(A) Short Body
246	B) Long Body
247	Providing and fixing of 15mm size chromium plated CP brass pillar cock of approved quality.
248	Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make confoRming to IS : 8931
249	Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
250	Providing and fixing of 15mm size chromium plated cast brass sink mixer Wall mounted/ Counter mounted of approved quality.(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
251	Providing and fixing of hand shower with chain of approved quality.(Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent)
252	Providing and fixing of shower including shower aRm of approved quality (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
253	Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic of approved quality. (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
254	Providing and fixing of 15mm size chromium plated cast brass wall mixer with bend pipe for head shower of approved quality. (Hindware/ Jaquar/ Kerrovit/ Asian/ Marc or equivalent) with flange
255	P/F Towel ring 20mm dia. CP of approved quality .
256	P/F Towel rod CP of approved quality .
257	P/F Soap Dish holder CP of approved quality .
258	Providing and fixing 600mmx120mmx5mm glass shelf with edges round of supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete.
259	C.P./PVC Long bends of required size of approved quality.
260	C.P. Waste for wash basin of approved quality
261	Providing and fixing of pvc manhole frame and cover of approved make of following sizes. (Heavy type)(A) 12\\"x12\\"
262	B) 18\\"x18\\"
263	C) 24\\"X24\\"
264	Construction of soakage pit by way of earth work in excavation including providing and fixing of pre-cast cement concrete rings 0.90 mtr dia. of specified thickness and 200-250 mm wide including all carriages complete. Including disposal of excavated earth within the campus as directed by EIC.
265	Providing and fixing of pre-cast cement concrete lid for soakage pit of specified size and thickness.
266	Providing & lying of non pressure NP2 Class Medium duty RCC pipes with collar joints with stiff mixture of cement mortar in proporton of 1:2 cement mortar including testing of joints etc complete job (450 mm dia
267	A) 300mm dia pipe
268	B) 250mm dia pipe
269	C) 200mm dia pipe
270	Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality including all carriages.A) HD - 20 Circular shape 560mm internal dia perforated .
271	P/F of PVC pipe/fittings line heavy duty (Prince made). (Grade-B) with fittings complete job. trenches including jointing and refilling the excavated material complete (Sample to be approved by EIC Including necessary fittings A300mm dia PVC pipe
272	B) 250mm dia PVC pipe
273	C) 200mm dia PVC pipe
274	D) 150mm dia PVC pipe
275	E) 100mm dia PVC pipe
276	F) 75mm dia PVC pipe
277	G) 50mm dia PVC pipe (Push Type)
278	Providing and fixing of the following PVC fittings. (Sample to be approved by EIC)Plain bend.(A) 100mm
279	B) 75mm
280	Collar (A) 100 mm
281	B) 75 mm
282	Door Bend(A) 100 mm
283	B) 75 mm
284	Door Tee(A)100 mm
285	B) 75 mm
286	Plain Tee(A) 100 mm
287	B) 75 mm
288	Door Junction Four Way (A)100 mm
289	B) 75 mm
290	Plain Junction Four Way(A) 100 mm
291	B) 75 mm
292	Floor Trap(A) 100 mm
293	B) 75 mm
294	C) Multi Trap 100mm
295	Providing and fixing of Health Faucet / jet spray with plastic flexible pipe 8 mm dia, 1.5 m long, wall hooked complete as required, including necessary Accessories , installation charges and complete in full respect as per the directions of Engineer- in- charge.
296	Providing & fixing of polycarbonate sheets of approved make(A) Corrugated type 1.5mm thick
297	B) Corrugated type 2.0 mm thick
298	C) Plain type 1.5
299	D) Plain Type 2.0
300	Providing & fixing of pvc panelling of thickness 9 to 10 mm of approved make including all related acessories like corner/top flashing, etc complete including base work complete job as per the directions of EIC
301	Providing & fixing of wallpaper of approved design, standard quaity and pattern of required GSM thickness, incld cost of adhesive and preoaration of surfaces etc complete.
302	Providing and fixing nickel plated M.S. pipe curtain rods with nickel platedbrackets 20 mm dia ( heavy type)
303	Providing and fixing decorative finials for curtain rods made of stainss steel with all fittings and fixing all complete job as per the directions of EIC
304	Touchwood polishing,two or more coats on wood work including pressing of nails,scrapping with emery paper, a coat of wood filler & fevicol washing complete as per directions of EIC on new woodwork.
305	Touchwood polishing,two or more coats on old wood work including a coat of wood filler & fevicol washing complete as per directions of EIC.also including removing of old existing finishing by proper scrapping with sand papering as per directions of EIC.
306	Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good thewall etc.25 25mm OD
307	B) 32mm Dia
308	External work including trenching, refilling etc. PN-16 pipe , 25mm Dia
309	B) 32mm Dia
310	C) 40mm Dia
311	D) 50mm Dia
312	E) 63mm Dia
313	Providing and fixing PPR Unions (Sample to be approved by EIC)(A) for 25mm dia.
314	B) for 32mm dia.
315	C) for 40mm dia.
316	D) for 50mm dia.
317	E) for 63mm dia.
318	Providing and fixing PPR ball valves (Sample to be approved by EIC)(A) for 25mm dia.
319	B) for 32mm dia.
320	C) for 40mm dia.
321	D) for 50mm dia.
322	E) for 63mm dia.
323	Providing and fixing of thermal insulation over following dia G.I Pipes at all heights (A) for 15mm dia.
324	B) for 20mm dia.
325	C) for 25mm dia.
326	D) for 40mm dia.
327	Providing and fixing C.P. two way brass bib cock of approved quality (Sample to be approved by EIC) 15mm nominal bore
328	Providing and fixing C.P. two way brass 2 way angle valve of approved quality (Sample to be approved by EIC) 15mm nominal bore
329	Providing & fixing various sizes of 15mm CP Nipples
330	P/F of Vertical Blinds Made upto 25mm High and 47mm wide extruded high strength aluminum alloy section with wall thickness of minimum 0.9 mm. The section should be oxidized and smooth operations and has the provision of fabric valance matching with louvers fabric .The fabric should be made up of 100% polyester having glazed acrylic (PU coating an both sides. The weight of fabric should be more than 400gm/ Sqm and thickness should be more than 0.8 mm. The fabric should be approved by EIC all other accessories should be of approved quality complete job as per the directions of EIC.
331	P/f of sunscreen Roller blinds having sturdy aluminum top tube of 38mm diameter powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain. The roller blind fabric should possess all specifications as approved i.e 36% Fibreglass and 64% vinyl, fabric thickness 0.43mm ± 5% of weight 393 gsm ± 5% complete job as per the directions of EIC.
332	Lifting, dismantling and reassembling including lowering and refixing of submersible pump in bore holes including related works up to all depths (like errecting of tripods, pulleys, wires etc)(A) For G.I pipes up to 25mm dia
333	B) For G.I pipes 32 to 100mm dia
334	Boring/ drilling for 150 mm dia bore manually/mechanically including removal of surplus materials got if in all sorts of soil complete job as per the direction of engineer incharge
335	Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge100mm nominal size dia
336	Repairs of Aluminium Doors/ Windows partition including cost of necessary beading, fasteners, screws, rubber gaskits complete
337	Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
338	Providing and fixing of PVC type (3 piece) corner shelf (Sample to be approved by EIC)
339	Providing and fixing of 10mm thick thermal foam of approved make including cost of adhesive complete job as per directions of engineer incharge (5 Feet Wide)
340	Providing and fixing of 10mm thick thermal foam of approved make including cost of adhesive complete job as per directions of engineer incharge (6 Feet Wide)
341	Providing and fixing of excel carpet (Graphic) of approved design and make including cost of adhesive compelete job as per directions of engineer incharge
342	Providing and fixing of Wall to Wall of approved design of minimum thickness 8-10 mm and make including cost of adhesive complete job as per directions of engineer incharge (The sample should be approved by Executive Engineer )
343	Providing and fixing of Crewel curtains with liner of approved cloth and fiber with kaashmiri design (machine work) for windows and complete job as per directions of engineer incharge at site (size 4'- 0\\"x7'6'-8'0\\") (The sample should be approved by Executive Engineer )
344	Providing and fixing of plain curtains of approved cloth and fiber for windows and complete job as per dirrections of engineer incharge at site 4'-0\\"x 7'-6 -8'0\\"\\" (The sample should be approved by Executive Engineer )
345	Carriage of materials by mechanical transport from source upto the site of work complete job .A) Stone agg 40 mm 12 kms av .lead
346	b) Stone agg 20mm 12 kms av .lead
347	c) Sand 20 kms av .lead
348	d) Bricks from 20 Kms
349	d) Stones from 15 Kms
350	Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
351	Providing and fixing Wooden Jaffri/Jaali Work made of seasoned hardwood/ KD wood (as specified), comprising wooden members of approved size and pattern, including cutting, shaping, joining, fixing with screws, nails and adhesives, sanding, polishing and all materials, labour, tools and accessories complete job as per the directions of EIC
352	Cutting holes of required size in brick masonry wall for fixing of exhaustfan including providing and fixing 300 mm dia PVC pipe conformingBIS-12818 and making good the same etc. complete as per direction ofEngineer-in-charge
353	Dismantling W.C. Pan of all sizes including disposal of dismantledmaterials i/c malba all complete as per directions of Engineer-in-Charge.
354	Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
355	Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed doors / windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. including Single / double glass panes and silicon sealant and all glazing material complete job as per the directions of EIC
356	Supply and fixiing of stainess steel three seater wainting bench with having perforeted/ plain seat and back rest with aram rests and sturdy tublur frame, all stainess steel mumbers polished to satin/ matte finsh complte in all respects including all carriages complete job as per the directions of EIC
357	Providing laying testing and commissing of following dia FRLS PVC insulated strande copper conductor wire complete with all connections as requreied including all carriages complete job as per the directions of EIC 1.5 mm
358	2.5 mm
359	10 mm
360	16 mm
361	Providing, supplying, installing, testing and commissioning of 2.0 Ton capacity, Inverter Type Split Air Conditioner (Hot and Cold) 5-Star rated, suitable for operation on 230V, 50Hz single-phase AC supply, comprising indoor and outdoor units, complete with copper refrigerant piping with insulation, drain pipe, interconnecting power/control cable, wall mounting brackets, remote control, refrigerant gas charging, vibration isolators, electrical connections, testing and commissioning, complete in all respects as per manufacturer's specifications and directions of the Engineer-in-Charge. (The sample should be approved by Executive Engineer )
362	Providing, supplying, installing, testing and commissioning of 1.50 Ton capacity, Inverter Type Split Air Conditioner (Hot and Cold) 5-Star rated, suitable for operation on 230V, 50Hz single-phase AC supply, comprising indoor and outdoor units, complete with copper refrigerant piping with insulation, drain pipe, interconnecting power/control cable, wall mounting brackets, remote control, refrigerant gas charging, vibration isolators, electrical connections, testing and commissioning, complete in all respects as per manufacturer's specifications and directions of the Engineer-in-Charge.(The sample should be approved by Executive Engineer )
363	Repair to existing AC with gas filling servicing etc job as per the directions of EIC
364	Lifting / disposal of excavated/ dismantelled unservicable material from site of work to dumping site by mechinical transport including loading,unloading beyond municipal limits. as per direction of Engineer-in-charge:
365	Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956- 01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
366	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth.
367	Beyond 60 cm girth upto and including 120 cm girth.
368	Beyond 120 cm girth upto and including 240 cm girth.
369	Above 240 cm girth
370	Providing and Fixing of Ceiling Fan 1200mm of Standard Quality and Make ISI approved
371	Providing and Fixing of Exhaust Fan 300mm of Standard Quality and Make ISI approved
372	Providing and Fixing of Wall Mounted Fan 300mm of Standard Quality and Make ISI approved
373	Concealed LED Light 12W
374	Plain/ LED Lamps 12W
375	Plain/ Surface LED Lamps 18W
376	Providing and fixing/commissioning/testing of electric lighting points, fan points, exhaust points, bell points, in 1.5mm multi strand copper wite insulated with PVC insulation, copper wite of approve brand, Havells Anchor, run through PVC conduit with clamps, laid under ground, including cost of conduit, 9 watt LED lights ceiling rose, 5 amp switch and socket, incl cost of Hylam board, cutting charges etc complete jobA) Lighting Points with 1.5 mm Sq wire including cost of MCB as required
377	B) Heating Points with 4mm sq. wire with 15AMP SSCB including cost of MCB
378	Supply, installation, testing and commissioning of Tube well Submersible pump for water supply (A) 1.0 hp Plastic Type
379	B) 1.0 hp S.S Type
380	C) 1.5 hp Plastic Type
381	D) 1.5 hp S.S Type
382	Supplying and fixing of Suitable rating common electrical starter 1-1.5 H.P
383	Repairs, rewinding of all types of Water Booster pumps, submersible pumps at various locations/ campuses including replacement of allied damaged/ wornout spares complete job including necessary repairs (A) 0.5-1.0 H.P Booster
384	A) 0.5-1.0 H.P Submesible
385	B) 1.5-2.0 H.P Booster
386	C) 1.5-2.0 H.P Submersible
387	Providing & fixing of Water Booster pumps (Water lifting pump of approved quality and make approved by engineer incharge including all necessary fitting complete job A) 0.5 hp
388	B) 1.0 hp
389	C) 1.5 hp
390	D) 2.0 hp Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jammu and Kashmir Tenders

Construction Tenders

Civil Construction Tenders

Toilet Bathroom Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Annual Maintenance Rate Contract For Repairs/ Renovation / Routine Maintenance Of Municipal Assets And Other Municipal Bulidings/ Lanes & Drains / Toilet- Lavatory Block (Ct-Pts), Urinals For The Year 2026-27., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Annual Maintenance Rate Contract For Repairs/ Renovation / Routine Maintenance Of Municipal Assets And Other Municipal Bulidings/ Lanes & Drains / Toilet- Lavatory Block (Ct-Pts), Urinals For The Year 2026-27., Srinagar-Jammu And Kashmir

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us