|
| 1 | Item Description |
| 2 | Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing in position and applying apriming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 3 | Providing corrugated G.S. sheet roofing includingvertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8 mm diameter withbitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of Engineer-in-charge. 0.50mm thick with zinc coating not less than 275gm/m2 |
| 4 | Providing ridges or hips of width 60 cm overall widthplain G.S. sheet fixed with polymer coated J or L hooks,bolts and nuts 8 mm dia G.I. limpet and bitumenwashers etc. complete as per direction of Engineer-incharge. 0.25mm thick with zinc coating not less than 275gm/m2 |
| 5 | Providing and fixing 1mm thick M.S. sheet door withframe of 40x40x6mm angle iron and 3mm M.S. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks& eyes, pinlets including embedding in cement concreteof required grade for fixing in position, all necessaryfittings, including applying a priming coat of approvedsteel primer etc. complete as required: Using M.S. angels 40x40x6 mm for diagonal braces. |
| 6 | Providing40×5mmflat ironholdfast40cmlongincludingfixingtoframewith10mmdiameterbolts,nuts andwooden plugs and embedding in cementconcreteblock30×10×15cm1:3:6mix(1cement:3finesand : 6gradedstoneaggregate20mmnominalsize) |
| 7 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts includingspreading in horizontal layers, watering, grading torequired slope, ramming, consolidating and compactingeach layer by using plate compactor or by any suitablemethod complete. |
| 8 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brickaggregate 40 mm nominal size) |
| 9 | Half brickmasonryworkwith first class bricks infoundationandplinthincludingcostofallmaterialsasrequired complete: In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 10 | 12 mm cement plaster of mix Cement mortar 1:4 (1 cement : 4 fine sand) |
| 11 | Neat cement punning. |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm inpatches of area 2.5 sqm and under including cutting thepatch in proper shape and preparing and plastering thesurface of the walls complete including disposal ofrubbish to the dumping ground with all leads and liftsincluding finishing even and smooth and curingcomplete as per direction of the Engineer in charge: With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 13 | Distempering with 1st quality washable acrylicdistemper of approved brand and manufacture and ofrequired shade on old work ( one or more coats ), togive an even shade as required complete as perdirection of the Engineer in charge. |
| 14 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 15 | Painting with synthetic enamel paint ( one or morecoats ) of required colour of approved brand andmanufacture on old work to give an even shadeincluding preparation of surface as required completeas per direction of the Engineer in charge. Please Enable Macros to View BoQ information |
