|
| 1 | Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 4 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 6 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 8 | Two or more coats on new work. |
| 9 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 10 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Supplying at site : |
| 13 | Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). |
| 14 | Less on 0.027 after correction on DSR items on a/c of [email protected] i.e. deduct for effect of correction factor on DSR Items ((1-0.973)-0.027 on (DSR Items) |
| 15 | Add 4.03% Cost Index (-) = |
| 16 | Providing and Fixing Fiberglass Reinforced Plastic (FRP) Railing of size 2.00 x 1.50mtr as per Photogragh/Drawing having 2 Nos. FRP Vertical Pipe 40x60x5mm thick, 3 Nos. FRP Horizontal Pipes 40x40x3mm thick, Inside pattern of 25mm dia round vertical FRP bar at the distance of 85mm and Round rings of 85mm dia of 45x4 mm flat. FRP Railing have, Anti corrosion, Weather resistance, highly durable, zero maintenance, lower Thermal conductivity, UV resistant, flexibility in design, light in weight resulted in easy to handle and install complete satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
