|
| 1 | Site Preparation for erection of PUF Panel Shed, Earth work in excavation by manual means over area for leveling purpose incl. disposal of excavated earth upto 1 m from cutting edge and should be disposed in near by places AKOS , foundation for plinth work, floor area, foundation for columns etc |
| 2 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns |
| 5 | Clearing of site by employing labour/machinery, tool and tackle and leveling of ground by employing men and machinery for start of work. The job includes labour cost, hire charges of tools and tackles, machinery and taxes as applicable |
| 6 | Providing and laying river bed material including loading unloading and watering after every layer of 30 cm. The compaction is to be done by manual mason Durmat (rammer). The rate includes supply and carriages and all forms of taxes |
| 7 | Providing and laying dry stone agg using 40 mm nominal size aggregiate |
| 8 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete. 50 mm thick with 20mm nominal size stone aggregate |
| 9 | CEMENT PLASTER (IN FINE SAND) 15 mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 10 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm |
| 11 | Structural steel work in built up sections, trusses & framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded/Bolted |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. |
| 13 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5mm thick with zinc coating not less than 275g/sq.m |
| 14 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/sq.m |
| 15 | The Room Walls are constructed of 50mm thick PUF insulated panels having 40+2Kg/m³ density lined with both side 00.50 mm PPGI sheet. The pre-coated sheet is of minimum 240mpa steel grade and has zinc coating of minimum 120gsm , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. The PPGI sheets have plastic protective guard film 0f 25 microns to avoid scratches during transportation. These panels have tongue & Groove joinery system along with cam lock. All items to be IS certified. Complete Job includes all cost of material, carraige to site and all taxes. |
| 16 | Providing and fixing false ceiling with 08 mm thick (min.) plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board , fixed to a grid made out of anodized aluminum main runners, cross runners fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed centre to centre including fixing to the frame with screws. |
| 17 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved maKE, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 18 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings / the directions of engineerin-charge. With float glass panes of 5.0 mm thickness. |
| 19 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 20 | P/f of sanitary accessories along with required fittings & connections in kitchen and bathroom area with all fittings and accessories mainly CPVC Pipe 1\\" , CPVC Pipe 1.25\\" , female elbow 1\\"x0.5\\", female Tee 1\\"x0.5\\", FTC 1\\"x0.5\\", Elbow 1\\", Plane Tee 1\\", Reducer 1\\"X1.25\\", socket 1.25\\", socket 1\\", Hooks, plug 0.5\\", solvent, Tank nipple 1.5\\", ball valve 1.25\\", union 1.25\\"., Tee 1.25\\", Bend 4\\", Floor trap 4\\"x2.5\\", Tee 2.5\\", bend 2.5\\", pipe 4\\", pipe 2.5\\", white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever) with all fittings and fixtures complete-01 no, C.P. brass long bib cock of approved make, angle valves., CP cup., Hand jet , Teflon Tape, Pvc connection, PVC waste pipe , CP jali plain, CP jali with hole, complete fittings and along with accessories of elecrical gysers(ISI marked) -02 nos, Stainless Steel (ISI) kitchen sink of size 18 inch with all fittings -01 no. along with the concrete cement kithen shelve of suitable thicknes (min 50mm thick ). Provind and fixing of vitrified tile on shelve (approved make), water tank conforming to IS standards of capacity 500Litre - 01 no., mirror of superior glass of suitable size=2 Nos. P/f of White Vitreous China Flat back wash basin size 18 inch -01 no. & White Vitreous China corner wash basin size 12 inch -01 no with all fittings and accessories. soap holder-02 no. Towel holder-02no. P/f of concrete cement circular septic tank with minimum dia 3' and depth of 8' with lid cover -01 no. providing and fixing approved quality anti skid ceramic/vitrified floor tiles in bathroom having an area 45 sqm, colour and shade on bathroom floor over a bed of cement mortar (1:4) including cutting, fitting, joining with white cement, curing, finishing and cleaning complete. Job includes cost of material, labour charges and all kind of taxes. |
| 21 | Complete electrification and ilumination along with accessories which includes mainly copper wire 1mm,copper wire 1.5mm,copper wire 2.5mm, PVC batten, PVC box + 12 modular+sheet -01 no each, PVC box + 08 modular+sheet -03 no each, PVC box + 03modular+sheet -05 no each, socket 6amps-05 no, switches 6amp-35no.,socket 16amps-05 no, switches 16amp-05no., Fan regulator 02 no. power indicator , Blank switch ., LED Concealed Light 5W-11 no., PVC junction box 4 way -12 no., GI clamp, PVC gatti & screws, service line 16 mm aluminium, MCB box double door 08 way -01 no., MCB 16 amp-06 no., SPN 63 amps-01 no, Button holder-08 no, ceiling fan -02 no., exhaust fan -02 nos. PVC tape rolls, LED street light 30W -04 nos. complete earthing at site by way of earth excavation of size 3'x3'x6' and insertion of earthing rod 6' along with filling of earth and coal+salt mixture in layers as per req. quantity. connecting of earthing rod to the MCB box by way of p/f of copper wire 10mm-20 mtrs along with nuts and bolts as required and covering the pit with P.C.C. (1:3:6) and main hole 9\\"x9\\"-01 no. Job includes cost of material, labour charges and all kind of taxes. Please Enable Macros to View BoQ information |
