|
| 1 | Supply, Installation, Testing and Commissioning of LT cables along with necessary excavation, laying of DWC pipes, fixing/replacement of junction boxes with required accessories, and allied works for street light poles at various locations across the VNIT campus. |
| 2 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Make-1: Polycab, KEI, Havels, Finolex Note-2 :Rate of all cables includes cost of lugs, glands, laying of GI wire (12 SWG) along with the cable etc. required for erection and connection of cable. |
| 3 | Supplying and laying (including cable laying inside DWC pipe, excavation excluded) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. Make: Ketron, Technoplast, Sai Plasto, S N Polymers , Reaselack Polymers |
| 4 | Supplying & erecting FRP box of size 300mm x 200mm x 125 mm, 2.7 mm thick complete with Bakelite Connector Plate sutiable for 16-40 AMP. 4 Bolt Type (TPN) inside pole junction box complete. on pole/wall. |
| 5 | Making trench in Hard murum/Tar road having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level 1.1kV cable complete as per specification no. CW-EXN-CTR |
| 6 | Making trench in Soft soil having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level of 1.1kV complete as per specification no. CW-EXN-CTR |
| 7 | Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm cable as per specification No. CB-GL |
| 8 | Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing pole junction box with sutaible cross arms by means of 8 to10mm G.I bolts and nuts complete. |
| 9 | Supplying & erecting MCB CHANNEL – Din rail (35 x 7.5 x 0.8 mm) White plated channel for arrangement of pole junction box complete |
| 10 | Supplying & erecting of Bakelite Connector Plate sutiable for 16-40 AMP. 4 Bolt Type (TPN) inside pole junction box complete. |
| 11 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). |
| 12 | Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit |
| 13 | Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB Please Enable Macros to View BoQ information |
