|
| 1 | General Notes:1. Contractor shall inspect the site to acquaint with the site conditions as well as security conditions at AMD.2. The rates quoted shall include cost of all tools and tackles, manpower including wages, liveries, all wastages and taxes GST, Labour cess, IT, etc., as applicable but exclusive of EPF and ESI .EPF and ESI are reimbursable as per relevant clause. |
| 2 | Earth work in excavation for all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all complete as specified and as directed by the Engineer-in-Charge. |
| 3 | Providing and laying in position cement concrete of grade1:4:8 (1 cement : 4 manufactured sand derived from natural stone : 8 graded stone aggregate 40 mm nominal size derived from natural stone))excluding the cost of centering and shuttering - All work up to plinth level as per specification and direction of E-I-C. |
| 4 | Providing and laying in position reinforced cement concrete of grade 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level as per specification and direction of E-I-C. |
| 5 | Providing and laying autoclaved aerated cement blocks masonry with 150mm to 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 6 | Providing and plastering with 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) all complete as specified and as directed by the Engineer-in-Charge. |
| 7 | Providing and laying Polished Granite stone slab of colour jet Black, Cherry/Ruby Red or equivalent in flooring/risers/threads etc., in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 8 | Providing and laying Polished Granite stone slab of colour jet Black, Cherry/Ruby Red or equivalent in flooring/risers/threads etc., in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 36mm / 40mm thick stone slab over Roff adhesive Cement / 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 9 | Providing nosing to treads / platform of granite stone all complete as directed by the Engineer-in-Charge. |
| 10 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 11 | Supplying and stacking good earth at site, including all labour for loading & unloading, transportation, royalty for good earth, all taxes etc complete as per the instruction and Direction of E -I-C. |
| 12 | Providing and laying 500x300x80mm size chamfered edge pre-cast reinforced concrete GRASS pavers of M-30 grade factory made Basant Betons or approved equivalent make with approved colour design and pattern, made by table vibratory method to attain superior toughened smooth finish using PU mould and top surface finish with short blasting, laid in required colour (terracota / blue etc.) & pattern over 50mm thick compacted bed of M Sand Mix, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all complete as per manufacturer’s specifications & direction of Engineer – in-Charge. |
| 13 | Engraving letters / figures on the granite slab with the required finishing in approved colour and patterns, the cost includes all above excluding the granite which shall be paid in the relavant above item of work Please Enable Macros to View BoQ information |