|
| 1 | M&L for taking down the desert cooler, scraping and removing old paint of desert cooler body (steel surface) and preparation of steel surfaces including necessary denting/ welding/ cutting etc. and spray painting two coats of smoke grey synthetic enamel paint (1st quality) over a coat of red oxide primer on outer surface and inner surface i.e. water tank and body, fan mounting blades shall be painted with a coat of anticorrosive black paint over a coat of red oxide primer complete for desert cooler of any size and capacity complete all as specified and directed by Engineer-in-Charge.Note:- Spray painting shall be carried out with spray gun and compressor with other required T&P. |
| 2 | M&L for general servicing, cleaning of desert cooler and oiling of fan motor complete all as specified and directed by the Engineer-in-Charge. |
| 3 | S&F in repairs welded wire mesh 3”x2” rectangle block of 12 standard wire gauge galvanized iron of size 24”x28” in size for side panels of desert coolers complete all as specified and directed by the Engineer-in-Charge. |
| 4 | Taking out fan motor single phase 230 Volts, 1400 RPM 3 speed 1/8 HP from desert cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete including replacement of gun metal bushes and reassembling and fixing in position complete all all as specified and directed by the Engineer-in-Charge. |
| 5 | Taking out fan motor 3 phase phase 440 Volts, of any capacity from industrial cooler and rewinding the same with supper enamelled copper wire as per existing gauge and varnishing complete including replacement of gun metal bushes and reassembling and fixing in position complete all as specified and directed by the Engineer-in-Charge. |
| 6 | S&F in repacement fan motor suitable for desert cooler 180 Watts with copper winding fan speed 1400 RPM, 3 speed complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F in repair, top of desert cooler, of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 8 | S&F in repair, front side grill of desert cooler of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet including gas welding at joints in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 9 | S&F in repair, side/ back shutter fabric item made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 10 | S&F in repair, corner of the desert cooler made out of 1 mm thick galvanised iron sheet of size suitable for desert cooler including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 11 | S&F in repair, bottom tank of desert cooler, of any capacity, fabricated out of 1 mm thick mild steel galvanised iron sheet with gas welding at joints in and including applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 12 | S&F in repairs legs set with gromate for desert cooler of any capacity and make as per existing complete all as specified and directed by the Engineer-in-Charge. |
| 13 | S&F in repair PVC flexible pipe of 16 mm outer dia complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F in repair desert cooler selector switches three way 230 Volts single phase complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F in repair grass pad (set of three) fixed in three sides panel of desert cooler complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in repair plug top 3 pin 5 Amps, 230 Volts (ISI marked) complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in repair PVC insulated and PVC sheathed round flexible three core copper conducter cable of size 40/0.0076 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repair capacitor 4 MFD for fan motor of desert coolers complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in repair submersible pump PVC body 230 Volts, 1/60 HP for desert cooler complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repair aluminium fan blade powder coated for fan motor of desert cooler of 20 inch sweep complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repair cast iron ring of cooler fan motor with clamps incluiding nuts and bolts suitable for desert coolers complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair PVC 3 way distributor suitable for 15 mm flexble pipe with nuts and screws for desert coolers complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair 15mm bore PVC elbow (ISI Marked) for desert cooler complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 15mm bore iron pipe, weight not less than 140 grams/ each, suitable for water/desert coolers complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L in repairs for fabrication of stand for desert cooler with 40mm x 6mm thick angle iron including welding, cutting, two coats of synthetic enamel paint and installed at site with locking arrangement complete all as specified and directed by Engineer-in-Charge. |
| 26 | Cutting and taking out compressor of water cooler of capacity 40/ 80 Ltr and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 27 | Cutting and taking out compressor of water cooler of capacity 60/ 120 Ltr and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 28 | Cutting and taking out compressor of water cooler of capacity 150/ 180 Ltr and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 29 | S&F in repair fan motor suitable for water cooler of capacity 40/ 80 ltr copper wound complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 30 | S&F in repair fan motor suitable for water cooler of capacity 60/ 120 ltr copper wound complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 31 | S&F in repair fan motor suitable for water cooler of capacity 150/ 180 ltr copper wound complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 32 | S&F in repair condensor coil of water cooler of capacity 40/ 80 litres complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 33 | S&F in repair condensor coil of water cooler of capacity 60/ 120 litres complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 34 | S&F in repair condensor coil of water cooler of capacity 150/ 180 litres complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 35 | S&F in repair plastic fan blade suitable for water cooler of any capacity complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 36 | S&F in repair capacitor 10 MFD for fan motor of water coolers/ refrigerator complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F in repair capacitor 15 MFD for fan motor of water coolers/ refrigerator complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F in repair 15mm size water tap, cast copper alloy, chromium plated push type suitable for water cooler of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repair starting capacitor (oil type) 80-100 mfd suitable for water cooler of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repair running capacitor (oil type) 30-60 mfd suitable for water cooler of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F in repair thermostat suitable for water cooler/ refrigerator of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repair waste water tray, stainless steel with coupling suitable for water cooler of capacity 40/ 80 and 60/ 120 liters and 150/ 180 liters complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 43 | S&F in repair relay suitable for water cooler/ refrigerator of any capacity complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 44 | S&F in repair over load protector for water cooler of any capacity complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 45 | S&F in repair PVC drain out pipe, heavy duty 32/ 40 mm dia, wall thickness 2 mm having length not less than 1.0 mtr complete with fittings such as nipple, clip etc. complete fixed to water coolers of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 46 | M&L for finding out the leakage with the pressure test of the condenser or cooling coil of Water Cooler/ Refrigerator/ Deep Freezer of any capacity storage/ cooling capacity and dismantling the same for repair, reassembling the same after repair of the leakage point by brazing/ soldering with and including testing the equipment to the entire satisfaction of the Engineer-in-Charge. |
| 47 | M&L for servicing of Water Cooler/ Refrigerator/ Deep Freezer of any capacity at existing location by cleaning of condenser, cooling coil, and other components with cooling coil rinse solution and clean water, greasing of fan, motor including cleaning of storage tank of WC with treated water after applying the potassium permanganate solution etc. without damaging any part complete all as specified and directed by the Engineer-in-Charge. |
| 48 | M&L for cutting and removing unservicable freezer unit of refrigerator capacity 165 to 285 Litres of any make, and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 49 | M&L for cutting and removing unservicable freezer unit of refrigerator capacity 310/ 320 Litres of any make and supply and fix new freezer unit with door and chill tray including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 50 | S&F in replacement, PCB control card suitable to refrigerator to any capacity complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 51 | S&F in repair condensor fan motor for deep freezer of any make and capacity complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 52 | Cutting and taking out compressor of deep freezer of any capacity and supply and fixing the compressor with jointing of copper refrigerant pipe line in and including charging of refrigerant gas to required level complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 53 | Cutting and taking out compressor of refrigerator of capacity 215 to 320 litres of any make and replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter and supply and recharging of refrigerant complete including testing for smooth functioning complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 54 | Cutting and taking out compressor of refrigerator of capacity 165 to 215 litres of any make and replacing the same compressor with new of same make of model complete, re-installing in original position with all accessories like relay with over load protector, filter and supply and recharging of refrigerant complete including testing for smooth functioning complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 55 | S&F in repair capillary tube suitable for any make and capacity water cooler/ refrigerator complete all as specified and directed by Engineer-in-Charge.Make:- As per existing make and model. |
| 56 | Supply and charging of refrigerant gas R-22 (freon) for charging in Refrigerator/ water cooler/ DF complete and checking of leakage, testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and charging of refrigerant gas R-134C (freon)/ 600 A for Refrigerator/ water cooler/ DF complete and checking/ testing for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in replacement of PVC connection pipe 15mm dia of both ends PTMT nuts and 600mm length complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F in repair stop valve cast iron copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed of 15mm dia complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair steel water tubing 15mm dia medium grade with all fitting laid in wall/ trenches complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for replacement of plywood grade BWR any size 6mm thick ISI Marked with wooden scandle for window frame complete at various location complete all as specified and directed by the Engineer-in-Charge. |
| 62 | S&F in repair of honey comb cooling pad 2\\" inch thick suitable for kavva industrial cooler complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repair filter suitable for refrigerator any size and make as per existing at site complete all as specified and directed by the Engineer-in-Charge. |
| 64 | M&L in repairs for submain wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade of size 4.0 Sqmm and one run of 4.0 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLS cable 1100 Volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc. fixed in wall or ceiling etc. complete all as specified and directed by the Engineer-in-Charge.Note:- Two runs of cable with one run of earth wire and PVC conduit shall be measured and paid as one length. |
| 65 | S&F in repair sheet metal enclosure SPN with two pin and earth plug socket with and including 20 Amps MCB 'C' curve single pole 240 Volt AC complete all as specified and directed by the Engineer-in-Charge. |
| 66 | S&F in repair MCB SP 25 Amp ‘C’ curve type, 240 Volts, 10 KA complete all as specified and directed by the Engineer-in-Charge. |
| 67 | M&L in repair point wiring with 1.5 Sqmm PVC insulated 1100 Volt grade IS-694 FRLS multi stranded but unsheathed copper conductor cable drawing in PVC casing capping and terminated in existing terminal box with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulator including contineous earth wire with copper cable S/C 1.5 Sqmm similar description of main cable connected to main earth dully complete all as specified and directed by Engineer-in-Charge. |
| 68 | S&F in repair socket outlet 2 in 1, 3 pin 5 Amp complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair switch piano flush type 240 Volts, single pole, one way, 5 Amps complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repair acrylic vegetable tray suitable for existing refrigerator of capacity 165 to 310 ltr complete all as specified and as directed. |
| 71 | M&L for repair to body base of water cooler 40/ 80 ltr capacity by replacing the rusted portion with PGI sheet to match with existing body with and including preparation of surface to smooth finish and duly painted complete with two coats of synthetic enamel paint complete all as specified and as directed. |
| 72 | All as per Item No. 71 above but capacity 120 ltr water cooler. |
| 73 | All as per Item No. 71 above but capacity 165 to 320 ltr refrigerator. |
| 74 | M&L for praperation of exterior portion of water cooler 40/ 80 ltr capacity to a smooth finish and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 75 | All as per Item No. 74 above but 120 ltr capacity. |
| 76 | S&F in repair cabin bulb 5 Watt for refrigerator complete all as specified and as directed. |
| 77 | S&F in repair cabin bulb holder for refrigerator with cabin brackets complete all as specified and as directed. |
| 78 | S&F in repair fan motor suitable for refrigerator 100 ltr to 195 ltr capacity complete all as specified and as directed. |
| 79 | S&F in repair fan motor suitable for refrigerator 200 to 280 ltr capacity complete all as specified and as directed. |
| 80 | S&F in repair fan motor suitable for refrigerator 280 to 340 ltr capacity complete all as specified and as directed. |
| 81 | S&F in repair timer suitable for refrigerator of capacity 100 ltr to 195 ltr capacity complete all as specified and as directed. |
| 82 | S&F in repair timer/ bio meter/ heater suitable for refrigerator of capacity 200 to 340 ltr capacity complete all as specified and as directed. |
| 83 | S&F in repair industrial cooler motor suitable 3 phase, 440 Volt for jambo industrial cooler complete all as specified and as directed. |
| 84 | S&F in repair gas filter and NRV suitable for existing refrigerator and water cooler of capacity 40-280 ltr complete all as specified and as directed. |
| 85 | M&L for disconnecting, cutting and taking out unserviceable sealed unit AC compressor 1.5 Tonne capacity, single phase, 230 Volt including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure testing, leakage, rectification and supply and fixing of new compressor of same capacity and make including gas charging R-22/ R-407c and testing complete all as specified and directed by the Engineer-in-Charge. |
| 86 | M&L for disconnecting, cutting and taking out unserviceable sealed unit AC compressor 2 Tonne capacity, single phase, 230 Volt including necessary modification of the foundation as required to suit the new compressor, vacumisation, pressure, testing, leakage, rectification and supply and fixing of new compressor of same capacity and make including gas charging R-22/ R-407c and testing complete all as specified and directed by the Engineer-in-Charge. |
| 87 | M&L for WATER JET servicing of SPLIT TYPE AC's of 1.5/ 2.0 Tonne capacity (complete indoor and outdoor unit by using service bag cover and cooling coil rinse solution for cleaning of coils), taking out the indoor top cover, outdoor top cover from existing location, cleaning of cooling coil, condenser coil and other components using clean water, greasing of fan, motor, blower etc. without damage any part and re-install at the same location complete all as specified and directed by the Engineer-in-Charge.Note:- Contractor has to provide blower and jet pump for cleaning and washing of AC, A separate PVC bag will also be provided for collection of waste, mechanic will be responsible to clean the site after servicing. Contractor shall at his own cost arrange water for servicing purpose. |
| 88 | M&L for WATER JET servicing of WINDOW TYPE AC's of 1.5/ 2.0 Tonne capacity (complete unit by using service bag cover and cooling coil rinse solution for cleaning of coils), taking out the indoor and outdoor cover from existing location, cleaning of cooling coil, condenser coil and other components using clean water, greasing of fan, motor, blower etc. without damage any part and re-install at the same location complete all as specified and directed by the Engineer-in-Charge.Note:- Contractor has to provide blower and jet pump for cleaning and washing of AC, A separate PVC bag will also be provided for collection of waste, mechanic will be responsible to clean the site after servicing. Contractor shall at his own cost arrange water for servicing purpose. |
| 89 | S&F in repair air conditioner running capacitor of capacity 2.5 MFD, 230 Volts, 50 HZ suitable for indoor unit complete all as specified and directed by the Engineer-in-Charge. |
| 90 | S&F in repair air conditioner running capacitor of capacity 4.0 MFD, 230 Volts, 50 Hz suitable for indoor unit complete all as specified and directed by the Engineer-in-Charge. |
| 91 | S&F in repair air conditioner running capacitor of capacity 6.0 MFD, 230 Volts, 50 Hz complete all as specified and directed by the Engineer-in-Charge. |
| 92 | S&F in repair air conditioner running capacitor of capacity 45.00 MFD, 230 Volts, 50 Hz complete all as specified and directed by the Engineer-in-Charge. |
| 93 | Takigng down existing condensing fan motor from the unit and material and labour for rewinding of condensing fan motor of capacity 1.5/ 2.0 Tonne (split type/ window type) of any make with super enameled copper wire winding wire including replacement of the motor bushes and shaft and testing on load for the entire satisfaction of Engineer-in-Charge. |
| 94 | Takigng down existing fan blower motor of cooling unit and material and labour for rewinding of fan blower motor of cooling unit of capacity1.5/ 2.0 ton (split type/ window type) unit with supper enameled copper winding wire of suitable gauge wire including replacement of the shaft and bushes and testing on load for the entire satisfaction of Engineer-in-Charge. |
| 95 | S&F in repairs condensing fan motor of capacity 1.5/ 2.0 Tonne for split type AC's single phase, AC 230 Volts, 50 Hz of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 96 | S&F in repairs condensing fan DC motor for 1.5/ 2.0 Tonne capacity split type AC's (for outdoor unit) of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 97 | S&F in replacement blower suitable (for indoor unit) of split type AC's capacity 1.5/ 2.0 Tonne of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 98 | S&F in repair fan blades (ISI marked) of suitable size for outdoor unit of 1.5/ 2.0 Tonne split type AC's complete all as specified and directed by the Engineer-in-Charge. |
| 99 | M&L for reparing of PCB control card suitable for 1.5/ 2.0 Tonne capacity split type AC/ window AC, single phase and make the PCB control card functional complete all as specified and directed by the Engineer-in-Charge. |
| 100 | M&L for reparing of PCB control card suitable for 1.5/ 2.0 Tonne capacity invertor split type AC/ window AC, single phase and make the PCB control card functional complete all as specified and directed by the Engineer-in-Charge. |
| 101 | S&F in replacement PCB control card suitable for AC indoor unit 1.5/ 2.0 Tonne capacity split type AC, single phase of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 102 | S&F in replacement PCB control card suitable for DC indoor unit 1.5/ 2.0 TR capacity invertor split type AC, single phase of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 103 | S&F in replacement PCB control card suitable outdoor unit for invertor type split AC's capacity 1.5/ 2.0 Tonne of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 104 | Supply only in replacement of remote suitable for 1.5/ 2.0 Tonne capacity split AC of original make as per existing at site complete all as specified and directed by the Engineer-in-Charge. |
| 105 | S&F in repair capillary copper tube (ISI Marked) of split/ window type AC capacity 1.5/ 2.0 Tonne complete all as specified and directed by the Engineer-in-Charge. |
| 106 | S&F in repair to replacement of condenser coil for window type/ split AC 1.5/ 2.0 Tonne capacity of any make and size including charging of gas R-22/ R407C complete all as specified and directed by the Engineer-in-Charge. |
| 107 | S&F in repair water tray (ISI Marked) for indoor unit of split AC of any capacity and make complete all as specified and directed by the Engineer-in-Charge. |
| 108 | S&F in repair of relay of split type AC of any make and any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 109 | S&F in repair thermostat suitable for any make of split/ window type AC 1.5 ton capacity complete all as specified and directed by the Engineer-in-Charge. |
| 110 | S&F in repair single pole contactor suitable for split type AC capacity 1.5/ 2.0 Ton complete all as specified and directed by the Engineer-in-Charge. |
| 111 | M&L for finding out the leakage with the pressure test of the condenser or cooling coil of window type AC's/ split type AC's of 1.5/ 2.0 ton and dismantling the same for repair, reassembling the same after repair the leakage point by brazing/ soldering with and including charging the gas R-22/ R-410a/ R-407c/ R-32 and testing the AC to the entire satisfaction of Engineer-in-Charge. |
| 112 | Supply, laying and commissioning of cable in replacement PVC sheathed cable with multistranded copper conductor of size 2.5 Sqmm, 3 Core complete all as specified and directed by the Engineer-in-Charge. |
| 113 | S&F in repair copper tube (ISI Marked) of size ⅝” or 1/2\\" dia for any capacity of split type AC complete all as specified and directed by the Engineer-in-Charge. |
| 114 | S&F in repair copper tube (ISI Marked) of size ¼” dia for any capacity of split type AC complete all as specified and directed by the Engineer-in-Charge. |
| 115 | M&L in repairs fire resistance, elastomeric nitrile rubber tubing (NBR) for pipe insulation thickness 10mm of size ⅝\\" or 1/2\\" dia of split type AC's any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 116 | M&L in repairs for fire resistance, elastomeric nitrile rubber tubing (NBR) for pipe insulation thickness 10mm of size¼\\" dia of split type AC's any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 117 | S&F in repair flexible drain pipe (PVC BRAIDED hose pipe) of size 15mm dia, for split type AC any capacity and any make complete all as specified and directed by the Engineer-in-Charge. |
| 118 | S&F in replacement voltage stabilizer of capacity 05 KVA, for automatic operation, single phase naturally air cooled, indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of +/- 2.5 % complete all as specified and directed by the Engineer-in-Charge. |
| 119 | S&F in replacement display card of indoor unit of split AC of capacity 1.5/ 2.0 Tonne of original make as per existing in the machine at site complete all as specified and directed by the Engineer-in-Charge. |
| 120 | S&F in repairs L & key valve (ISI marked) of size 5/8\\" or 1/2\\" for condenser unit split type AC 1.5/ 2.0 Ton, proper leak check shall be carried after replacement of valve complete all as specified and directed by the Engineer-in-Charge. |
| 121 | S&F in repair L & key valve (ISI marked) of size 1/4\\" for condenser unit split type AC 1.5/ 2.0 Ton, proper leak check shall be carried after replacement of valve complete all as specified and directed by the Engineer-in-Charge. |
| 122 | M&L for fabrication of canopy stand for outdoor split type AC unit with and including angle iron 40mm x 40mm x 6mm, with GI sheet on the top, including welding, cutting including painting and grouted in PCC (1:2:4) on roof/ floor installation at site complete all as specified and directed by the Engineer-in-Charge. |
| 123 | S&F in repair contact sensor (indoor/ outdoor/ gas pipe/ temprature) suitable for existing split AC inverter type or non inverter tpe of capacity 1.5/ 2.0 TR complete all as specified and directed by the Engineer-in-Charge. |
| 124 | S&F in repair of flair nut size 5/8\\" and 1/2\\"dia for split type AC of any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 125 | S&F in repairs of flair nut size 3/8\\" and 1/4\\" dia for split type AC of any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 126 | S&F in repair of dead nut size 1/4'' dia for any capacity of split type AC complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 127 | S&F in repair of dead nut size 1/4'' dia for any capacity of split type AC complete all as specified and directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
