|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8980/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: REPAIR, REPLACEMENT OF PARTS AND PAINTING OF STEEL FURNITURE UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable seat from chair tubular steel with Arms and supply and fixing new seat of 460mm x 415mm size made out of first class hard and canning the chair with 2mm plastic cane and 4mm cane for beading and fixing the seat to chair with 4 Nos nut and bolts with washers all as specified and directed. |
| 3 | Chair tubular steel with out arms {FD-75(M)} Removing damaged/ unserviceable seat of size 405x380mm from chair tubular steel with out arm and fixing new seat of 405mm x 380mm size made out of first class hard and canning the seat with 2mm plastic cane and 4mm cane for beading and fixing the seat to chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 4 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable back from chair tubular steel with Arms and supply and fixing new back of size 460mm x 415mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 5 | Chair tubular steel with out arms {FD-75(M)} Removing damaged/ unserviceable back from chair tubular steel with out arms and supply and fixing new back of size 405mm x 380mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 6 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable arms from chair tubular steel with arms and supply and fixing new arms made out of first class hard wood with suitable size of screws including painting DOOR TO DOOR at user location the wooden surface with two coats of first quality black synthetic enamel paint over a coat of primer complete all as specified & directed and shown on drawings. |
| 7 | Removing damaged/ unserviceable rubber bush to the bottom of the chair tubular steel with Arms and with out arms and S & F with new synthetic rubber bush of size as per existing with suitable size of screw as per drawing all as specified and directed. FD- 75 & 75(M) |
| 8 | M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel with arms (FD-75) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel with arms (FD-75). |
| 9 | M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel without arms (FD-75M) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel without arms (FD - 75M). |
| 10 | Chair Verandah (FD-19/256/359) Removing damaged/ unserviceable cane plastic from chair varandah, cleaning and preparing tubular surface & painting DOOR TO DOOR at user location with 2 coats of first quality synthetic enamel paint white over a coat of red oxide primer and finally recanning the chair varandah with 4mm wide new plastic cane as per Godrej Pattern/ drg and providing new rubber shoes for all four legs as per drawing and as directed. |
| 11 | Locker Bed Side Steel (FD-1029)Removing unserviceable handle and S & F new CP handle 'D' type 100mm long complete all as specified & directed and as shown on drg. |
| 12 | Locker Bed Side Steel (FD-1029)Removing unserviceable hasp & staple and S & F new CP hasp & staple75mm long complete all as specified & directed and shown on drg. |
| 13 | Locker Bed Side Steel (FD-1029)Removing unserviceable hinges and S & F new MS hinges 75 mm long complete as specified & directed and as shown on drg. |
| 14 | Locker Bed Side Steel (FD-1029)Removing old unserviceable leg and S & F new leg of size 440x70x100 mm made out of MS sheet 1.25 mm thick, made to shape and fixing in the same position by welding including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 15 | Locker Bed Side Steel (FD-1029)Removing old unserviceable shelf carefully and S & F new shelf made out of MS sheet 1mm thick made to shape and fixing the same properly in position including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 16 | Locker Bed Side Steel (FD-1029)Removing old unserviceable door single leaf carefully and S & F new door single leaf made out of MS sheet 1mm thick made to shape & size and fixing the same properly in position including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 17 | Locker Bed Side Steel (FD-1029) M & L for painting DOOR TO DOOR at user location TWO coats of synthetic enamel paint of approved shade both internally and externally to Locker Bed Side Steel of MES pattern including Removing dents applying putty to level the surface before painting DOOR TO DOOR at user location all as specified & directed and shown on drawings. |
| 18 | Almirah Steel Medium/ Small (FD-350/1032/1034)Removing unserviceable handle and S & F of 125 mm long chromium plated handle for almirah steel large and medium all as shown on drg and as directed. |
| 19 | Removing old unserviceable lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed. |
| 20 | Removing old unserviceable clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as directed (For one clip). |
| 21 | Removing old unserviceable cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet made to suitable for locking device complete all as specified/ directed and shown on drg. |
| 22 | Removing old unserviceable shelf carefully and S & F of new shelf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/ directed and shown on drawing. (For one shelf) |
| 23 | Removing old unserviceable door single leaf carefully and S & F of new door single leaf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/directed and shown on drawing. (For one door) |
| 24 | Removing old unserviceable legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 420x70x100 mm made to shape and fixed in the same position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/directed and shown on drg. (For one leg) |
| 25 | M & L for painting DOOR TO DOOR at user location TWO coats of synthetic enamel paint approved shade both internally and externally to Almirah Steel Medium/ Small of MES pattern including removing of dents applying putty to the level of the surface before painting DOOR TO DOOR at user location all as specified/ directed and shown on drawings. Almirah Steel Medium/ Small (FD-350/1032/1034) |
| 26 | Almirah Steel Large (FD-1031/1033/351/TP)Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large all as shown on drg and as directed by Engr-in-Charge. |
| 27 | Removing old unserviceable lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge. |
| 28 | Removing old unserviceable clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as directed (For one clip). |
| 29 | Removing old unserviceable cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet for almirah large steel made to suitable for locking device complete all as specified/directed and shown on drg. |
| 30 | Removing old unserviceable shelf of almirah large carefully and S & F of new shelf made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/ directed and shown on drg. (For one shelf) |
| 31 | Removing old unserviceable door single leaf carefully and S & F of new door single leaf for almirah large made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/ directed and shown on drg. |
| 32 | Removing old unserviceable legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah large made to shape and fixing in the same position including painting DOOR TO DOOR at user location of single coat of red oxide primer as specified/directed and shown on drawing. (For one leg) |
| 33 | M & L for painting DOOR TO DOOR at user location TWO coats of synthetic enamel paint approved shade both internally and externally to the following furniture article of MES pattern including removing of dents applying putty to the level of the surface before painting DOOR TO DOOR at user location all as specified/ directed and shown on drawings. Almirah Steel Large (FD-1031/1033/351/TP) |
| 34 | Teapoy Verandah (FD-205/208/383)Removing old unserviceable top from Teapoy Verandah steel and supply and fixing new top 18 mm thick prelaminated particle board exterior grade with top face decorative teak wood shade lamination and other side balancing white lamination including 6mm x 18mm teak wood edging alround top fixed as per drg and as directed. |
| 35 | Teapoy Verandah (FD-205/208/383.)M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint approved shade to steel surfaces of Teapoy Verandah of MES pattern all as specified & directed and shown on drawings including removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings. |
| 36 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing old unserviceable table top and S & F new table top 1830 mm x 680 mm using 18 mm thick block board including covering the top surface with 22 gauge aluminium sheet cut to size and fixed with MS screws of size as directed complete all as shown on drg. |
| 37 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable long rail/ long stiffener and S & F new long rail/ long stiffener made out of 25 mm MS square tube, 1.6 mm thick, 1550 mm long, fixed by means of continuous welding to legs/ short stiffener to match the existing components including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer as specified & directed and shown on drawing. |
| 38 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable short rail/ short stiffener and S & F new short rail/ short stiffener made out of 25mm MS square tube, 1.6 mm thick 465 mm long, fixed by means of continuous welding to legs to match the existing components including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed and shown on drawing. |
| 39 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 741mm long, fixed by means of continuous welding to rails/ stiffener to match the existing components including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer all as specified & directed and shown on drawing. |
| 40 | Table dining ORs 1900x685x760 mm (Drg No FD-165)M & L for painting DOOR TO DOOR at user location one coat of synthetic enamel paint approved shade to steel surfaces of Table dining ORs of MES pattern including Removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings. |
| 41 | Table office clerk steel (FD-84M/1004)Removing old unserviceable table top and S&F new table top 1220x610 mm using 18 mm thick prelaminated particle board exterior grade one side decorative teak wood shade and other side balancing white including 4 x 18 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg. |
| 42 | Table office clerk steel (FD-84M/1004)Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer after necessary preparation of surface complete all as specified and directed. |
| 43 | Table office officers/ clerk steel (FD-1003/84M/1004) Removing old UNSV lock for drawers from table clerk/officer steel and S&F new lock 6 lever with duplicate keys to drawer steel complete all as specified and directed |
| 44 | Table office clerk steel (FD-84M/1004)M & L for painting DOOR TO DOOR at user location to steel surfaces of table office clerk with TWO coat of synthetic enamel paint of approved shade both internally and externally by Removing dents, applying putty to the level of the surface before painting DOOR TO DOOR at user location including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 45 | Table office officers steel (FD-1003)Removing old unserviceable table top and S & F new table top 1680x870 mm using 18 mm thick prelaminated particle board exterior grade one side decorative teak wood shade and other side balancing white including 18 x 4 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg. |
| 46 | Table office officers steel (FD-1003)Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide Primer after necessary preparation of surface complete all as specified and directed. |
| 47 | Table office officers steel (FD-1003)M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of table officer office steel by removing dents and applying putty to the level the surface before painting DOOR TO DOOR at user location including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 48 | Table 900x900x760 mm Drg No FD-1009Removing old unserviceable table top and S&F new table top 900x900 mm using 18 mm thick prelaminated particle board exterior grade one side teak wood shade and other side balancing white with 18x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg. |
| 49 | Table 900x900x760 mm Drg No FD-1009Removing rusted/ unserviceable top rail and S & F new top rail made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continuous welding to legs to match the existing components including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed and shown on drawing. |
| 50 | Table 900x900x760 mm Drg No FD-1009Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube, 1.6 mm thick, 760 mm long leg fixed by means of continuous welding to rails to match the existing components including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed and shown on drawing. |
| 51 | Table 900x900x760 mm Drg No FD-1009M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint approved shade both internally and externally to Table 900x900x760 mm Drg No FD-1009 of MES pattern by removing dents applying putty to level the surface before painting DOOR TO DOOR at user location including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 52 | Table 900x600x760 mm Drg No FD-1007/1008Removing old unserviceable table top and S & F new table top 900x600 mm using 18 mm thick prelaminated particle board exterior grade one side teak wood shade and other side balancing white with 18 x 4mm thick teak wood beading all around the top of table complete all as specified & directed and shown on drg. |
| 53 | Table 900x600x760 mm Drg No FD-1007/1008Removing rusted/ unserviceable long rail/ stiffener and S & F new long rail/stiffener made out of 25 mm MS square tube 1.6 mm thick, 750mm long, fixed by means of continuous welding to legs/ stiffener to match the existing components including one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed and shown on drawing. |
| 54 | Table 900x600x760 mm Drg No FD-1007/1008Removing rusted/ unserviceable Short rail/ stiffener and S & F shot rail/ stiffener made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to legs to match the existing components including one coat of synthetic enamel paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing. |
| 55 | Table 900x600x760 mm Drg No FD-1007/1008Removing rusted/ unserviceable leg S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 742mm long, fixed by means of continuous welding to Rails/stiffener to match the existing components including one coat of synthetic enamel paint over a coat of red oxide primer with preparation of surfaces complete all as specified & directed and shown on drawing. |
| 56 | Table 900x600x760 mm Drg No FD-1007/1008Removing old unserviceable drawers from table 900 X 600 X 760 mm steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting DOOR TO DOOR at user location with one coat of synthetic enamel paint over a coat of red oxide primer after necessary preparation of surface complete all as directed. |
| 57 | Table 900x600x760 mm Drg No FD-1007/1008M & L preparation of surfaces and painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of Table 900x600x760 mm Drg No FD-1007/1008 of MES pattern by removing dents applying putty to level the surface before painting DOOR TO DOOR at user location including Removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 58 | Table Bed side (FD/E6/MAP/15(R))Taking out unserviceable back plywood from Table Bed side and S&F new back made of 6mm thick commercial plywood exterior grade one side teak wood shade and other side balancing white ISI Marked complete all as specified and shown in Drg. |
| 59 | Table Bed side (FD/E6/MAP/15(R))Taking out unserviceable shelves from Table Bed side and S&F new shelves made of 18mm thick pre-laminated particle board exterior grade one side teak wood shade and other side balancing white duly provided with 4 mm thick Teak wood beading complete all as specified and Shown in Drg. |
| 60 | Table Bed side (FD/E6/MAP/15(R)Taking out unserviceable side from Table Bed side and S&F new side made of pre-laminated particle board exterior grade one side teak face and other side balancing white with 4mm thick teak wood beading matching with the existing shape & size complete all as specified and directed by Engr-in-charge. |
| 61 | Table Bed side (FD/E6/MAP/15(R))Taking out unserviceable top/bottom from Table Bed side and S&F new top/bottom made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white complete all as specified, shown on drg and directed by Engr-in-charge. |
| 62 | Table Bed side (FD/E6/MAP/15(R))Taking out unserviceable shutter from Table Bed side and supply and fix new shutter made of 18mm thick pre-laminated particle board exterior grade one side teak face other side balancing white including handle complete all as specified, shown on drg and directed by Engr-in-charge. |
| 63 | Table Bed side (FD/E6/MAP/15(R))Taking out unserviceable drawer from Table Bed side and supply and fix new drawer made of 12mm thick commercial ply including handle complete all as specified, shown on drg and directed by Engr-in-charge. |
| 64 | Table Bed side (FD/E6/MAP/15(R))M & L painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint of approved shade to steel parts of Table bed side steel of MES pattern including preparation of surfaces all as specified, directed and shown on drawings. |
| 65 | Chair writing cushioned FD/E6/MAP/12Taking out / Dismantling of worn out / Damaged / defective seat/ Back of Chair writing cushioned FD/E6/MAP/12 and replacing the same with new seat/ back of MES pattern and fixing in same position including painting DOOR TO DOOR at user location the steel part and replacing handle with rubber bush as per drg & as directed by Engr-in-Charge.FD-E6/MAP/12. |
| 66 | Form with back (FD-78,322,F-8)M & L for painting DOOR TO DOOR at user location TWO coat of synthetic enamel paint of approved shade to steel parts and polishing to wooden parts with high quality wood polish to Form with back of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. |
| 67 | Form with back (FD-78,322,F-8)M & L for removing old unserviceable seat and back support for form with back with new one of same size and shape made of 18mm plywood with sun mica to be fixed on one side and wooden parts with high quality wood polish to Form with back of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. |
| 68 | Form without back (FD-77,1027) M & L for painting DOOR TO DOOR at user location with TWO coat of synthetic enamel paint of approved shade to steel parts and polishing to wooden parts with high quality wood polish of Form without back (FD-77,1027) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. |
| 69 | Form with back (FD-78,322,F-8)M & L for removing old unserviceable Seat for form without back with new one of same size and shape made of 18mm plywood with sunmica to be fixed on one side and wooden parts with high quality wood polish to Form without back of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. |
| 70 | Book Case Steel(FD/TP) Removing old UNSV lock for Book Case steel land S&F new lock 6 lever with duplicate keys to Book Case steel complete all as specified and directed |
| 71 | Material and labour for removing old unserviceable plywood for BED HARD MAP and S & F new Plywood of 12 mm thickness of same size and shape as per BED Hard MAP with proper approved fixture all as per specified and as directed. |
| 72 | M & L for painting DOOR TO DOOR at user location two coats of synthetic enamel paint approved shade both internally and externally for following MES furniture items including removing of dents applying putty to the level of the surface before painting DOOR TO DOOR at user location all as specified/ directed and shown on drawings. Book Case steel |
| 73 | All as per item no 71 above but Box Kit steel |
| 74 | All as per item no 71 above but Racks |
| 75 | All as per item no 71 above but Stool Steel |
| 76 | All as per item no 71 above but Trestle store room Iron |
| 77 | All as per item no 71 above but Shoe Rack |
| 78 | All as per item no 71 above but Compactor |
| 79 | All as per item no 71 above but Bed Hard MAP |
| 80 | All as per item no 71 above but Table Cook Note:- The painting work shall be executed door to door at user location and where the furniture exist in different user units of OTM, MD Accn and at BSO's furniture yard under the jurisdiction of GE Golconda and no claim whatsoever shall be entertained and contractor shall include this aspect while quoting the tender. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
