|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete complete all as specified and directed. |
| 2 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry complete all as specified. |
| 3 | Demolition of brick work or stonework or precast concrete articles and precast concrete block walling ,built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 4 | M&L for PCC 1:2:4 type B1 using 12.5mm graded aggregate as in benchig concrete all as specified and directed. |
| 5 | 100mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed. . |
| 6 | M&L cement concrete 1:2:4 ( nominal mix ) type B-1 (using 20 mm graded crushed stone aggregates) as in copings and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork where required complete all as specified and directed |
| 7 | M&L for walling of random rubble stone masonry , uncoarsed, well bonded bedded and soilidly hearted built in CM 1:6, complete all as specified and directed. |
| 8 | All as per srl item no 07 above but except stone. Note: Old stone obtained against demolition shall be used. |
| 9 | Extra over stone walling, random ruble brought upto courses, for hammer dressing to face stones and dressing of face beds and joints, with maximum depressions on face from straight edge held against the dressed surface not exc 20mm on granite or trap stone complete all as specified and directed. |
| 10 | M&L raised pointing to squared rubble stone masonry, un-courses or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 11 | M&L for chequered cement concrete tiles 25x25x20-25mm/ 30cmx30cmx20-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 12 | M&L for 80mm thick machine pressed factory made precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-40 of any size & shape confirming to IS-15658-2006 complete all as specified and directed. |
| 13 | M&L for sand cushionunder floor complete all as specified and directed. |
| 14 | S&F for PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls or floor of 110mm bore complete all as specified and directed. |
| 15 | Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less, complete all as specified. |
| 16 | Forming 10-12mm thick expansion joints in 200-250mm thick concrete slab filled withpre-formed bituminous filler and top 30mm primed and sealed with sealingcompound, Grade ‘A’, thickness of slab 200mm, complete all as specified & directed. |
| 17 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade A, complete all as specified and directed. |
| 18 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade B complete all as specified. |
| 19 | M&L for preparing bituminous surfaces of road and marking 2-3mm thick lines, centre lines, stop lines, dashes, arrows etc. on roads pavements with hot applied thermo plastic road marking paint of approved colour of white or yellow confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 20 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 19 of tender doucments. Please Enable Macros to View BoQ information |