|
| 1 | Re-arrangement of 3.3KV overhead line at Pali UG mines Substation at Pali Sub Area, Johilla Area. |
| 2 | Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole of length exceeding 10 metresbut not exceeding 15 metres in cement concrete M-10 (1cement:3 core sand: 6 graded stoneaggregate 40mm nominal size) base, foundation, muffing including excavation and backrefilling etc. as required. |
| 3 | Supplying and erection of stay set complete (galavanised) with 19/20 mm dia x 1.8 metres longstay rod, anchor plate of size 45 cm x45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20cm x60 cm),7/4.00 mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation includingexcavation and refilling etc. as required. |
| 4 | Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. asrequired. |
| 5 | Weaving of cradle guard as required. |
| 6 | Erection of cradle guard as required |
| 7 | Structural steel work in single section, fixed with or without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 8 | Supply and fixing of M.S. Bolt & nut with washer size, Size- 5/8\\" X 3\\" |
| 9 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) doublepole cross arm for three wire 11KV over head line conductors complete with through bolts andnuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channeliron and with bolts and nuts on the other side for tying the cross arms together, includingdrilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) andpainting with primer and finish paint as required. |
| 10 | Supplying and erection of 11KV (45 KN) Polymer disc insulator with 320mm creepingdistance for 11KV overhead lines with galvanized insulator fittings, ball and socket type, andcomplete with galvanized strain clamp, bolts, nuts washer etc. as required. , 45KN over headlines with complete hardware fitting as clamps, bolts, nuts, washers etc. as required. |
| 11 | Supplying and erection of 11KV (5 KN, 320mm creepage distance) polymer pin insulatorcomplete with long steel head G.I. pin, nut, washer etc. as required. |
| 12 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. asrequired.4 span x 30 mtr x 0.394 Kg/ meter = 47.28 Kg |
| 13 | Prima coat(Red oxide) with aluminium paint, brushing complete with material and labourincluding preparation of surface( 4.172 sq mtr. per pole x 17 poles) |
| 14 | Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clampon existing HT/LT structure/poles. |
| 15 | Re-lettering with black Japan paint/synthetic enamel paint of approved brand and manufacture(For identification on each pole with yellow base)[15 letters per pole, Total letters = 15 x 45 poles = 675 letters675 letters of 8 cm height each = 675 x 8 =5400] |
| 16 | Supplying and making outdoor cable end termination with heat shrinkable jointing kitcomplete with all accessories including lugs suitable for following size of 3 core, PVC/XLPECopper conductor cable of 11 KV grade as required. Size- 95 sq. mm(2nos. - Birsinghpur MainSS, 1no. - Pali UG SS) (3M/Raychem or eq.) |
| 17 | Supplying and making outdoor cable end termination with heat shrinkable jointing kitcomplete with all accessories including lugs suitable for following size of 3 core, PVC/XLPECopper conductor cable of 11 KV grade as required. Size- 70 sq. mm (2nos. - BirsinghpurMain SS, 3nos. - Pali UG SS, 3 nos. - Pali Colony SS)(3M/Raychem or eq.) |
| 18 | Supplying and making outdoor cable end termination with heat shrinkable jointing kitcomplete with all accessories including lugs suitable for following size of 3 core, PVC/XLPECopper conductor cable of 11 KV grade as required. Size- 50 sq. mm (1no. - Birsinghpur SS,1no. - Pali UG SS) (3M/Raychem or eq.) |
| 19 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
